scholarly journals New Downscaling Approach Using ESA CCI SM Products for Obtaining High Resolution Surface Soil Moisture

2020 ◽  
Vol 12 (7) ◽  
pp. 1119 ◽  
Author(s):  
Jovan Kovačević ◽  
Željko Cvijetinović ◽  
Nikola Stančić ◽  
Nenad Brodić ◽  
Dragan Mihajlović
Keyword(s):  
Soil Moisture ◽  
High Resolution ◽  
Random Forest ◽  
Spatial Resolution ◽  
Surface Soil ◽  
Initial Step ◽  
Surface Soil Moisture ◽  
In Situ Data ◽  
Random Forest Models

ESA CCI SM products have provided remotely-sensed surface soil moisture (SSM) content with the best spatial and temporal coverage thus far, although its output spatial resolution of 25 km is too coarse for many regional and local applications. The downscaling methodology presented in this paper improves ESA CCI SM spatial resolution to 1 km using two-step approach. The first step is used as a data engineering tool and its output is used as an input for the Random forest model in the second step. In addition to improvements in terms of spatial resolution, the approach also considers the problem of data gaps. The filling of these gaps is the initial step of the procedure, which in the end produces a continuous product in both temporal and spatial domains. The methodology uses combined active and passive ESA CCI SM products in addition to in situ soil moisture observations and the set of auxiliary downscaling predictors. The research tested several variants of Random forest models to determine the best combination of ESA CCI SM products. The conclusion is that synergic use of all ESA CCI SM products together with the auxiliary datasets in the downscaling procedure provides better results than using just one type of ESA CCI SM product alone. The methodology was applied for obtaining SSM maps for the area of California, USA during 2016. The accuracy of tested models was validated using five-fold cross-validation against in situ data and the best variation of model achieved RMSE, R2 and MAE of 0.0518 m3/m3, 0.7312 and 0.0374 m3/m3, respectively. The methodology proved to be useful for generating high-resolution SSM products, although additional improvements are necessary.

Development of a deep learning-based method for estimating surface soil moisture at high spatial resolution from Sentinel-1 satellite data

2021 ◽  
Author(s):  
Nicklas Simonsen ◽  
Zheng Duan
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
Deep Learning ◽  
High Resolution ◽  
Moisture Content ◽  
Spatial Resolution ◽  
Soil Moisture Content ◽  
Surface Soil ◽  
Surface Soil Moisture

<p>Soil moisture content is an important hydrological and climatic variable with applications in a wide range of domains. The high spatial variability of soil moisture cannot be well captured from conventional point-based in-situ measurements. Remote sensing offers a feasible way to observe spatial pattern of soil moisture from regional to global scales. Microwave remote sensing has long been used to estimate Surface Soil Moisture Content (SSMC) at lower spatial resolutions (>1km), but few accurate options exist in the higher spatial resolution (<1km) domain. This study explores the capabilities of deep learning in the high-resolution domain of remotely sensed SSMC by using a Convolutional Neural Network (CNN) to estimate SSMC from Sentinel-1 acquired Synthetic Aperture Radar (SAR) imagery. The developed model incorporates additional SSMC predictors such as Normalized Difference Vegetation Index (NDVI), temperature, precipitation, and soil type to yield a more accurate estimation than traditional empirical formulas that focus solely on the conversion of backscatter signals to relative soil moisture. This also makes the developed model less sensitive to site-specific conditions and increases the model applicability outside the training domain. The model is developed and tested with in-situ soil moisture measurements in Denmark from a dense network maintained by HOBE (Danish Hydrological Observatory). The unique advantage of the developed model is its transferability across climate zones, which has been historically absent in many prior models. This would open up opportunities for high-resolution soil moisture mapping through remote sensing in areas with relatively few soil moisture gauges. A reliable high-resolution soil moisture platform at good temporal resolution would allow for more precise erosion modelling, flood forecasting, drought monitoring, and precision agriculture.</p>

Exploring the use of machine-learning techniques to integrate ground- and remote sensing-based observations for efficient near-surface soil moisture mapping

2020 ◽  
Author(s):  
Sarah Schönbrodt-Stitt ◽  
Paolo Nasta ◽  
Nima Ahmadian ◽  
Markus Kurtenbach ◽  
Christopher Conrad ◽  
...  
Keyword(s):  
Machine Learning ◽  
Soil Moisture ◽  
Spatial Resolution ◽  
Surface Soil ◽  
Bare Soil ◽  
Small Scale ◽  
Surface Soil Moisture ◽  
Near Surface ◽  
Campania Region

<p>Mapping near-surface soil moisture (<em>θ</em>) is of tremendous relevance for a broad range of environment-related disciplines and meteorological, ecological, hydrological and agricultural applications. Globally available products offer the opportunity to address <em>θ</em> in large-scale modelling with coarse spatial resolution such as at the landscape level. However, <em>θ</em> estimation at higher spatial resolution is of vital importance for many small-scale applications. Therefore, we focus our study on a small-scale catchment (MFC2) belonging to the “Alento” hydrological observatory, located in southern Italy (Campania Region). The goal of this study is to develop new machine-learning approaches to estimate high grid-resolution (about 17 m cell size) <em>θ</em> maps from mainly backscatter measurements retrieved from C-band Synthetic Aperture Radar (SAR) based on Sentinel-1 (S1) images and from gridded terrain attributes. Thus, a workflow comprising a total of 48 SAR-based <em>θ</em> patterns estimated for 24 satellite overpass dates (revisit time of 6 days) each with ascendant and descendent orbits will be presented. To enable for the mapping, SAR-based <em>θ</em> data was calibrated with in-situ measurements carried out with a portable device during eight measurement campaigns at time of satellite overpasses (four overpass days in total with each ascendant and descendent satellite overpasses per day in November 2018). After the calibration procedure, data validation was executed from November 10, 2018 till March 28, 2019 by using two stationary sensors monitoring <em>θ</em> at high-temporal (1-min recording time). The specific sensor locations reflected two contrasting field conditions, one bare soil plot (frequently kept clear, without disturbance of vegetation cover) and one non-bare soil plot (real-world condition). Point-scale ground observations of <em>θ</em> were compared to pixel-scale (17 m × 17 m), SAR-based <em>θ</em> estimated for those pixels corresponding to the specific positions of the stationary sensors. Mapping performance was estimated through the root mean squared error (RMSE). For a short-term time series of <em>θ</em> (Nov 2018) integrating 136 in situ, sensor-based <em>θ</em> (<em>θ</em><sub>insitu</sub>) and 74 gravimetric-based <em>θ</em> (<em>θ</em><sub>gravimetric</sub>) measurements during a total of eight S1 overpasses, mapping performance already proved to be satisfactory with RMSE=0.039 m³m<sup>-</sup>³ and R²=0.92, respectively with RMSE=0.041 m³m<sup>-</sup>³ and R²=0.91. First results further reveal that estimated satellite-based <em>θ</em> patterns respond to the evolution of rainfall. With our workflow developed and results, we intend to contribute to improved environmental risk assessment by assimilating the results into hydrological models (e.g., HydroGeoSphere), and to support future studies on combined ground-based and SAR-based <em>θ</em> retrieval for forested land (future missions operating at larger wavelengths e.g. NISARL-band, Biomass P-band sensors).</p>

Surface soil moisture data assimilation for irrigation amounts and timing estimation in semi-arid regions

2021 ◽  
Author(s):  
Nadia Ouaadi ◽  
Lionel Jarlan ◽  
Saïd Khabba ◽  
Jamal Ezzahar ◽  
Olivier Merlin
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Surface Soil ◽  
Land Surface Model ◽  
Surface Model ◽  
Surface Soil Moisture ◽  
Field Scale ◽  
In Situ Data ◽  
Statistical Metrics

<p>Irrigation is the largest consumer of water in the world, with more than 70% of the world's fresh water dedicated to agriculture. In this context, we developed and evaluated a new method to predict daily to seasonal irrigation timing and amounts at the field scale using surface soil moisture (SSM) data assimilated into a simple  land surface model through a particle filter technique. The method is first tested using in situ SSM before using SSM products retrieved from Sentinel-1. Data collected on different wheat fields grown  in Morocco, for both flood and drip irrigation techniques, are used to assess the performance of the proposed method. With in situ data, the results are good. Seasonal amounts are retrieved with R > 0.98, RMSE <42 mm and bias<2 mm. Likewise, a good agreement is observed at the daily scale for flood irrigation where more than 70% of the irrigation events are detected with a time difference from actual irrigation events shorter than 4 days, when assimilating SSM observation every 6 days to mimics Sentinel-1 revisit time. Over the drip irrigated fields, the statistical metrics are R = 0.70, RMSE =28.5 mm and bias= -0.24 mm for irrigation amounts cumulated over 15 days. The approach is then evaluated using SSM products derived from Sentinel-1 data; statistical metrics are R= 0.64, RMSE= 28.78 mm and bias = 1.99 mm for irrigation amounts cumulated over 15 days. In addition to irrigated fields, the applicationof the developed methodover rainfed fieldsdid not detect any irrigation. This study opens perspectives for the regional retrieval of irrigation amounts and timing at the field scale and for mapping irrigated/non irrigated areas.</p>

scholarly journals C-band radar data and in situ measurements for the monitoring of wheat crops in a semi-arid area (center of Morocco)

2021 ◽  
Author(s):  
Nadia Ouaadi ◽  
Jamal Ezzahar ◽  
Saïd Khabba ◽  
Salah Er-Raki ◽  
Adnane Chakir ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
High Resolution ◽  
Scientific Community ◽  
Surface Soil ◽  
Radar Data ◽  
Surface Soil Moisture ◽  
Data Set ◽  
Semi Arid

Abstract. A better understanding of the hydrological functioning of irrigated crops using remote sensing observations is of prime importance in the semi-arid areas where the water resources are limited. Radar observations, available at high resolution and revisit time since the launch of Sentinel-1 in 2014, have shown great potential for the monitoring of the water content of the upper soil and of the canopy. In this paper, a complete set of data for radar signal analysis is shared to the scientific community for the first time to our knowledge. The data set is composed of Sentinel-1 products and in situ measurements of soil and vegetation variables collected during three agricultural seasons over drip-irrigated winter wheat in the Haouz plain in Morocco. The in situ data gathers soil measurements (time series of half-hourly surface soil moisture, surface roughness and agricultural practices) and vegetation measurements collected every week/two weeks including above-ground fresh and dry biomasses, vegetation water content based on destructive measurements, cover fraction, leaf area index and plant height. Radar data are the backscattering coefficient and the interferometric coherence derived from Sentinel-1 GRDH (Ground Range Detected High resolution) and SLC (Single Look Complex) products, respectively. The normalized difference vegetation index derived from Sentinel-2 data based on Level-2A (surface reflectance and cloud mask) atmospheric effects-corrected products is also provided. This database, which is the first of its kind made available in open access, is described here comprehensively in order to help the scientific community to evaluate and to develop new or existing remote sensing algorithms for monitoring wheat canopy under semi-arid conditions. The data set is particularly relevant for the development of radar applications including surface soil moisture and vegetation parameters retrieval using either physically based or empirical approaches such as machine and deep learning algorithms. The database is archived in the DataSuds repository and is freely-accessible via the DOI: https://doi.org/10.23708/8D6WQC (Ouaadi et al., 2020a).

Optimal Spatial Resolution of Sentinel-1 Surface Soil Moisture Evaluated Using Intensive in Situ Observations

2021 ◽  
Author(s):  
Theresa C. Van Hateren ◽  
Marco Chini ◽  
Patrick Matgen ◽  
Luca Pulvirenti ◽  
Nazzareno Pierdicca ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Spatial Resolution ◽  
Surface Soil ◽  
Surface Soil Moisture ◽  
In Situ Observations

Synergistic use of SMOS and Sentinel-3 for retrieving spatiotemporally estimates of surface soil moisture and evaporative fraction

2021 ◽  
Author(s):  
Maria Piles ◽  
Miriam Pablos Hernandez ◽  
Mercè Vall-llossera ◽  
Gerard Portal ◽  
Ionut Sandric ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Land Surface ◽  
Vegetation Index ◽  
Surface Soil ◽  
Added Value ◽  
The European Union ◽  
Surface Soil Moisture ◽  
Evaporative Fraction ◽  
In Situ Data

<p>Earth Observation (EO) makes it possible to obtain information on key parameters characterizing interactions among Earth’s system components, such as evaporative fraction (EF) and surface soil moisture (SSM). Notably, techniques utilizing EO data of land surface temperature (Ts) and vegetation index (VI) have shown promise in this regard. The present study presents an implementation of a downscaling method that combined the soil moisture product from SMOS and the Fractional Vegetation Cover provided by Sentinel 3 ESA platform.</p><p>The applicability of the investigated technique is demonstrated for a period of two years (2017-2018) using in-situ data acquired from five CarboEurope sites and from all the sites available in the REMEDHUS soil moisture monitoring network, representing a variety of climatic, topographic and environmental conditions. Predicted parameters were compared against co-orbital ground measurements acquired from several European sites belonging to the CarboEurope ground observational network.</p><p>Results indicated a close agreement between all the inverted parameters and the corresponding in-situ data. SSM maps predicted from the “triangle”  SSM showed a small bias,<sup></sup> but a large scatter. The results of this study provide strong supportive evidence of the potential value of the investigated herein methodology in accurately deriving estimates of key parameters characterising land surface interactions that can meet the needs of fine-scale hydrological applications. Moreover, the applicability of the presented approach demonstrates the added value of the synergy between ESA’s operational products acquired from different satellite sensors, namely in this case SMOS & Sentienl-3. As it is not tight to any particular sensor can also be implemented with technologically advanced EO sensors launched recently or planned to be launched.</p><p>In the present work Dr Petropoulos participation has received funding from the European Union’s Horizon 2020 research and innovation programme ENViSIoN under the Marie Skłodowska-Curie grant agreement No 752094.</p>

scholarly journals In Situ Observation-Constrained Global Surface Soil Moisture Using Random Forest Model

2021 ◽  
Vol 13 (23) ◽  
pp. 4893
Author(s):  
Lijie Zhang ◽  
Yijian Zeng ◽  
Ruodan Zhuang ◽  
Brigitta Szabó ◽  
Salvatore Manfreda ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Random Forest ◽  
Land Surface Temperature ◽  
Soil Texture ◽  
Land Surface ◽  
Surface Soil ◽  
Vegetation Indices ◽  
Surface Soil Moisture ◽  
Spatio Temporal

The inherent biases of different long-term gridded surface soil moisture (SSM) products, unconstrained by the in situ observations, implies different spatio-temporal patterns. In this study, the Random Forest (RF) model was trained to predict SSM from relevant land surface feature variables (i.e., land surface temperature, vegetation indices, soil texture, and geographical information) and precipitation, based on the in situ soil moisture data of the International Soil Moisture Network (ISMN.). The results of the RF model show an RMSE of 0.05 m3 m−3 and a correlation coefficient of 0.9. The calculated impurity-based feature importance indicates that the Antecedent Precipitation Index affects most of the predicted soil moisture. The geographical coordinates also significantly influence the prediction (i.e., RMSE was reduced to 0.03 m3 m−3 after considering geographical coordinates), followed by land surface temperature, vegetation indices, and soil texture. The spatio-temporal pattern of RF predicted SSM was compared with the European Space Agency Climate Change Initiative (ESA-CCI) soil moisture product, using both time-longitude and latitude diagrams. The results indicate that the RF SSM captures the spatial distribution and the daily, seasonal, and annual variabilities globally.

scholarly journals C-band radar data and in situ measurements for the monitoring of wheat crops in a semi-arid area (center of Morocco)

2021 ◽  
Vol 13 (7) ◽  
pp. 3707-3731
Author(s):  
Nadia Ouaadi ◽  
Jamal Ezzahar ◽  
Saïd Khabba ◽  
Salah Er-Raki ◽  
Adnane Chakir ◽  
...  
Keyword(s):  
Remote Sensing ◽  
Soil Moisture ◽  
High Resolution ◽  
Scientific Community ◽  
Surface Soil ◽  
Radar Data ◽  
Surface Soil Moisture ◽  
Data Set ◽  
Semi Arid

Abstract. A better understanding of the hydrological functioning of irrigated crops using remote sensing observations is of prime importance in semi-arid areas where water resources are limited. Radar observations, available at high resolution and with a high revisit time since the launch of Sentinel-1 in 2014, have shown great potential for the monitoring of the water content of the upper soil and of the canopy. In this paper, a complete set of data for radar signal analysis is shared with the scientific community for the first time to our knowledge. The data set is composed of Sentinel-1 products and in situ measurements of soil and vegetation variables collected during three agricultural seasons over drip-irrigated winter wheat in the Haouz plain in Morocco. The in situ data gather soil measurements (time series of half-hourly surface soil moisture, surface roughness and agricultural practices) and vegetation measurements collected every week/2 weeks including aboveground fresh and dry biomasses, vegetation water content based on destructive measurements, the cover fraction, the leaf area index, and plant height. Radar data are the backscattering coefficient and the interferometric coherence derived from Sentinel-1 GRDH (Ground Range Detected High Resolution) and SLC (Single Look Complex) products, respectively. The normalized difference vegetation index derived from Sentinel-2 data based on Level-2A (surface reflectance and cloud mask) atmospheric-effects-corrected products is also provided. This database, which is the first of its kind made available open access, is described here comprehensively in order to help the scientific community to evaluate and to develop new or existing remote sensing algorithms for monitoring wheat canopy under semi-arid conditions. The data set is particularly relevant for the development of radar applications including surface soil moisture and vegetation variable retrieval using either physically based or empirical approaches such as machine and deep learning algorithms. The database is archived in the DataSuds repository and is freely accessible via the following DOI: https://doi.org/10.23708/8D6WQC (Ouaadi et al., 2020a).

scholarly journals Potential for the Detection of Irrigation Events on Maize Plots Using Sentinel-1 Soil Moisture Products

2020 ◽  
Vol 12 (10) ◽  
pp. 1621 ◽  
Author(s):  
Michel Le Page ◽  
Lionel Jarlan ◽  
Marcel M. El Hajj ◽  
Mehrez Zribi ◽  
Nicolas Baghdadi ◽  
...  
Keyword(s):  
Soil Moisture ◽  
Water Balance ◽  
Vegetation Index ◽  
Surface Soil ◽  
Radar Data ◽  
Balance Model ◽  
Surface Soil Moisture ◽  
Upper Management ◽  
In Situ Data

Although the real timing and flow rates used for crop irrigation are controlled at the scale of individual plots by the irrigator, they are not generally known by the farm upper management. This information is nevertheless essential, not only to compute the water balance of irrigated plots and to schedule irrigation, but also for the management of water resources at regional scales. The aim of the present study was to detect irrigation timing using time series of surface soil moisture (SSM) derived from Sentinel-1 radar observations. The method consisted of assessing the direction of change of surface soil moisture (SSM) between observations and a water balance model, and to use thresholds to be calibrated. The performance of the approach was assessed on the F-score quantifying the accuracy of the irrigation event detections and ranging from 0 (none of the irrigation timing is correct) to 100 (perfect irrigation detection). The study focused on five irrigated and one rainfed plot of maize in South-West France, where the approach was tested using in situ measurements and surface soil moisture (SSM) maps derived from Sentinel-1 radar data. The use of in situ data showed that (1) irrigation timing was detected with a good accuracy (F-score in the range (80–83) for all plots) and (2) the optimal revisit time between two SSM observations was 2–4 days. The higher uncertainties of microwave SSM products, especially when the crop is well developed (normalized difference of vegetation index (NDVI) > 0.7), degraded the score (F-score = 69), but various possibilities of improvement were discussed. This paper opens perspectives for the irrigation detection at the plot scale over large areas and thus for the improvement of irrigation water management.

Sign in / Sign up

Export Citation Format

Share Document