scholarly journals Identification of Silvicultural Practices in Mediterranean Forests Integrating Landsat Time Series and a Single Coverage of ALS Data

2021 ◽  
Vol 13 (18) ◽  
pp. 3611
Author(s):  
Jessica Esteban ◽  
Alfredo Fernández-Landa ◽  
José Luis Tomé ◽  
Cristina Gómez ◽  
Miguel Marchamalo

Understanding forest dynamics at the stand level is crucial for sustainable management. Landsat time series have been shown to be effective for identification of drastic changes, such as natural disturbances or clear-cuts, but detecting subtle changes requires further research. Time series of six Landsat-derived vegetation indexes (VIs) were analyzed with the BFAST (Breaks for Additive Season and Trend) algorithm aiming to characterize the changes resulting from harvesting practices of different intensities (clear-cutting, cutting with seed-trees, and thinning) in a Mediterranean forest area of Spain. To assess the contribution of airborne laser scanner (ALS) data and the potential implications of it being after or before the detected changes, two scenarios were defined (based on the year in which ALS data were acquired (2010), and thereby detecting changes from 2005 to 2010 (before ALS data) and from 2011 to 2016 (after ALS data). Pixels identified as change by BFAST were attributed with change in VI intensity and ALS-derived statistics (99th height percentile and forest canopy cover) for classification with random forests, and derivation of change maps. Fusion techniques were applied to leverage the potential of each individual VI change map and to reduce mapping errors. The Tasseled Cap Brightness (TCB) and Normalized Burn Ratio (NBR) indexes provided the most accurate results, the latter being more precise for thinning detection. Our results demonstrate the suitability of Landsat time series and ALS data to characterize forest stand changes caused by harvesting practices of different intensity, with improved accuracy when ALS data is acquired after the change occurs. Clear-cuttings were more readily detectable compared to cutting with seed-trees and thinning, detection of which required fusion approaches. This methodology could be implemented to produce annual cartography of harvesting practices, enabling more accurate statistics and spatially explicit identification of forest operations.

Author(s):  
S. Sofia ◽  
S. Sferlazza ◽  
A. Mariottini ◽  
M. Niccolini ◽  
T. Coppi ◽  
...  

Abstract. Precision forestry is becoming a key sector for forest planning because it allows complex analyses of forest data to be carried out simply and economically. It contributes to the integration between technicians and operators in the sector by guaranteeing the transparency of the forest management operations (Corona et al., 2017). In the context of the progressive development of technology, we investigated the feasibility of using the hand-held mobile laser scanner (HMLS) system in different types of forest sites and comparison of the characteristics of individual trees (tree height, diameters at breast height) with traditional surveys, applied with the aim to validate the performance of the system for a future alternative methodology for forest planning thanks to the collaboration with the forestry company “Dimensione Ricerca Ecologia Ambiente Italia” (D.R.E.Am. Italia). GEOSLAM ZEB HORIZON ™ laser scanner is a hand-held mobile laser scanner containing SLAM technology that can be solved the problem of no GNSS signal or poor signal under the forest canopy making it more practical for forest investigations (Gollob et al., 2020). 15 forest sample plots are selected to reflect different stand conditions in Mediterranean forests taking into count the development stage and density of the sub-canopy vegetation, as well as the species composition in the forest stands. The aim of this study is to show the possible extrinsic circumstances that make the method fail by varying the ecological status of forest plots.


Water ◽  
2021 ◽  
Vol 13 (13) ◽  
pp. 1864
Author(s):  
Peter Mewis

The effect of vegetation in hydraulic computations can be significant. This effect is important for flood computations. Today, the necessary terrain information for flood computations is obtained by airborne laser scanning techniques. The quality and density of the airborne laser scanning information allows for more extensive use of these data in flow computations. In this paper, known methods are improved and combined into a new simple and objective procedure to estimate the hydraulic resistance of vegetation on the flow in the field. State-of-the-art airborne laser scanner information is explored to estimate the vegetation density. The laser scanning information provides the base for the calculation of the vegetation density parameter ωp using the Beer–Lambert law. In a second step, the vegetation density is employed in a flow model to appropriately account for vegetation resistance. The use of this vegetation parameter is superior to the common method of accounting for the vegetation resistance in the bed resistance parameter for bed roughness. The proposed procedure utilizes newly available information and is demonstrated in an example. The obtained values fit very well with the values obtained in the literature. Moreover, the obtained information is very detailed. In the results, the effect of vegetation is estimated objectively without the assignment of typical values. Moreover, a more structured flow field is computed with the flood around denser vegetation, such as groups of bushes. A further thorough study based on observed flow resistance is needed.


Land ◽  
2021 ◽  
Vol 10 (4) ◽  
pp. 433
Author(s):  
Xiaolan Huang ◽  
Weicheng Wu ◽  
Tingting Shen ◽  
Lifeng Xie ◽  
Yaozu Qin ◽  
...  

This research was focused on estimation of tree canopy cover (CC) by multiscale remote sensing in south China. The key aim is to establish the relationship between CC and woody NDVI (NDVIW) or to build a CC-NDVIW model taking northeast Jiangxi as an example. Based on field CC measurements, this research used Google Earth as a complementary source to measure CC. In total, 63 sample plots of CC were created, among which 45 were applied for modeling and the remaining 18 were employed for verification. In order to ascertain the ratio R of NDVIW to the satellite observed NDVI, a 20-year time-series MODIS NDVI dataset was utilized for decomposition to obtain the NDVIW component, and then the ratio R was calculated with the equation R = (NDVIW/NDVI) *100%, respectively, for forest (CC >60%), medium woodland (CC = 25–60%) and sparse woodland (CC 1–25%). Landsat TM and OLI images that had been orthorectified by the provider USGS were atmospherically corrected using the COST model and used to derive NDVIL. R was multiplied for the NDVIL image to extract the woody NDVI (NDVIWL) from Landsat data for each of these plots. The 45 plots of CC data were linearly fitted to the NDVIWL, and a model with CC = 103.843 NDVIW + 6.157 (R2 = 0.881) was obtained. This equation was applied to predict CC at the 18 verification plots and a good agreement was found (R2 = 0.897). This validated CC-NDVIW model was further applied to the woody NDVI of forest, medium woodland and sparse woodland derived from Landsat data for regional CC estimation. An independent group of 24 measured plots was utilized for validation of the results, and an accuracy of 83.0% was obtained. Thence, the developed model has high predictivity and is suitable for large-scale estimation of CC using high-resolution data.


Author(s):  
Qingwang Liu ◽  
Shiming Li ◽  
Kailong Hu ◽  
Yong Pang ◽  
Zengyuan Li
Keyword(s):  

2011 ◽  
Vol 3 (5) ◽  
pp. 393-401 ◽  
Author(s):  
Karin Nordkvist ◽  
Ann-Helen Granholm ◽  
Johan Holmgren ◽  
Håkan Olsson ◽  
Mats Nilsson

Sign in / Sign up

Export Citation Format

Share Document