scholarly journals Recent Advances of MEMS Resonators for Lorentz Force Based Magnetic Field Sensors: Design, Applications and Challenges

Sensors ◽  
2016 ◽  
Vol 16 (9) ◽  
pp. 1359 ◽  
Author(s):  
Agustín Herrera-May ◽  
Juan Soler-Balcazar ◽  
Héctor Vázquez-Leal ◽  
Jaime Martínez-Castillo ◽  
Marco Vigueras-Zuñiga ◽  
...  
2021 ◽  
Vol 8 ◽  
Author(s):  
Yafeng Lu ◽  
Chen Wang ◽  
Shiqiang Zhao ◽  
Yongzheng Wen

Graphene is a promising platform for configurable terahertz (THz) devices due to its reconfigurability, but most researches focus on its electrical tunability. Here, we propose a graphene-based THz metasurface comprised of graphene cut-wire arrays for magnetic manipulation of the THz wave. With the external magnetostatic field applied, the resonant currents of the graphene cut-wire can be effectively affected by the Lorentz force, leading to an evident tuning of the response of the metasurface. The simulated results fully demonstrate that the resonance frequencies of the graphene THz metasurface can be efficiently modulated under a vertical magnetostatic field bias, resulting in the manipulation of the transmittance and phase of the THz wave. As a new method of the tunable THz metasurface, our structure shows promising applications in the THz regime, including the ultracompact THz modulators and magnetic field sensors.


2015 ◽  
Vol 112 ◽  
pp. 68-77 ◽  
Author(s):  
P. Gkotsis ◽  
M. Lara-Castro ◽  
F. López-Huerta ◽  
A.L. Herrera-May ◽  
J.-P. Raskin

2020 ◽  
Vol 56 (9) ◽  
pp. 1-9
Author(s):  
Allamys Allan Dias da Silva ◽  
Henrique Patriota Alves ◽  
Felipe Camargo Marcolino ◽  
Jehan Fonseca do Nascimento ◽  
Joaquim Ferreira Martins-Filho

Author(s):  
E. Kaniukov ◽  
V. Bundyukova ◽  
D. Yakimchuk ◽  
A. Shumskaya ◽  
Yu. Bogatyrev ◽  
...  

Author(s):  
Alexander Vakhrushev ◽  
Abdellah Kharicha ◽  
Ebrahim Karimi-Sibaki ◽  
Menghuai Wu ◽  
Andreas Ludwig ◽  
...  

AbstractA numerical study is presented that deals with the flow in the mold of a continuous slab caster under the influence of a DC magnetic field (electromagnetic brakes (EMBrs)). The arrangement and geometry investigated here is based on a series of previous experimental studies carried out at the mini-LIMMCAST facility at the Helmholtz-Zentrum Dresden-Rossendorf (HZDR). The magnetic field models a ruler-type EMBr and is installed in the region of the ports of the submerged entry nozzle (SEN). The current article considers magnet field strengths up to 441 mT, corresponding to a Hartmann number of about 600, and takes the electrical conductivity of the solidified shell into account. The numerical model of the turbulent flow under the applied magnetic field is implemented using the open-source CFD package OpenFOAM®. Our numerical results reveal that a growing magnitude of the applied magnetic field may cause a reversal of the flow direction at the meniscus surface, which is related the formation of a “multiroll” flow pattern in the mold. This phenomenon can be explained as a classical magnetohydrodynamics (MHD) effect: (1) the closure of the induced electric current results not primarily in a braking Lorentz force inside the jet but in an acceleration in regions of previously weak velocities, which initiates the formation of an opposite vortex (OV) close to the mean jet; (2) this vortex develops in size at the expense of the main vortex until it reaches the meniscus surface, where it becomes clearly visible. We also show that an acceleration of the meniscus flow must be expected when the applied magnetic field is smaller than a critical value. This acceleration is due to the transfer of kinetic energy from smaller turbulent structures into the mean flow. A further increase in the EMBr intensity leads to the expected damping of the mean flow and, consequently, to a reduction in the size of the upper roll. These investigations show that the Lorentz force cannot be reduced to a simple damping effect; depending on the field strength, its action is found to be topologically complex.


2006 ◽  
Vol 101 (S1) ◽  
pp. S24-S26
Author(s):  
D. A. Balaev ◽  
K. A. Shaikhutdinov ◽  
S. I. Popkov ◽  
D. M. Gokhfeld ◽  
M. I. Petrov

2016 ◽  
Vol 791 ◽  
pp. 568-588 ◽  
Author(s):  
Andrew D. Gilbert ◽  
Joanne Mason ◽  
Steven M. Tobias

In the process of flux expulsion, a magnetic field is expelled from a region of closed streamlines on a $TR_{m}^{1/3}$ time scale, for magnetic Reynolds number $R_{m}\gg 1$ ($T$ being the turnover time of the flow). This classic result applies in the kinematic regime where the flow field is specified independently of the magnetic field. A weak magnetic ‘core’ is left at the centre of a closed region of streamlines, and this decays exponentially on the $TR_{m}^{1/2}$ time scale. The present paper extends these results to the dynamical regime, where there is competition between the process of flux expulsion and the Lorentz force, which suppresses the differential rotation. This competition is studied using a quasi-linear model in which the flow is constrained to be axisymmetric. The magnetic Prandtl number $R_{m}/R_{e}$ is taken to be small, with $R_{m}$ large, and a range of initial field strengths $b_{0}$ is considered. Two scaling laws are proposed and confirmed numerically. For initial magnetic fields below the threshold $b_{core}=O(UR_{m}^{-1/3})$, flux expulsion operates despite the Lorentz force, cutting through field lines to result in the formation of a central core of magnetic field. Here $U$ is a velocity scale of the flow and magnetic fields are measured in Alfvén units. For larger initial fields the Lorentz force is dominant and the flow creates Alfvén waves that propagate away. The second threshold is $b_{dynam}=O(UR_{m}^{-3/4})$, below which the field follows the kinematic evolution and decays rapidly. Between these two thresholds the magnetic field is strong enough to suppress differential rotation, leaving a magnetically controlled core spinning in solid body motion, which then decays slowly on a time scale of order $TR_{m}$.


Sign in / Sign up

Export Citation Format

Share Document