Femtosecond-Laser-Assisted Fabrication of Radiation-Resistant Fiber Bragg Grating Sensors

This paper demonstrates the fabrication of radiation-resistant fiber Bragg grating (FBG) sensors using infrared femtosecond laser irradiation. FBG sensors were written inside acrylate-coated fluorine-doped single-mode specialty optical fibers. We detected the Bragg resonance at 1542 nm. By controlling the irradiation conditions, we improved the signal strength coming out from the FBG sensors. A significant reduction in the Bragg wavelength shift was detected in the fabricated FBG sensors for a radiation dose up to 105 gray, indicating excellent radiation resistance capabilities. We also characterized the temperature sensitivity of the radiation-resistant FBG sensors and detected outstanding performance.

Influence of Optic Cable Construction Parts on Recovery Process after Gamma Irradiation

Fibre optic cables are widely used as communication cables in Instrumentation and Control (I&C) systems. In the case of nuclear power plants (NPPs), using optic cables in mild environments outside of containment areas are very common. However, at present, there is a need for fibre optic cables to be used in containment areas, i.e., with radiation. An optical fibre consists of a highly transparent core that possesses a higher refractive index than the surrounding transparent cladding, which possesses a lower refractive index. Most optical fibres are manufactured from glass (silica with required dopants) which is created at high temperatures from the reaction between gasses. The glass used in optical fibres is sensitive; it becomes dark during exposure to radiation, which compromises the optic functions. That is why there has been a slow infiltration of optic cable in NPP containment areas. Radiation resistant optic fibres have been developed. Although these fibres are called “radiation resistant,” they go through a darkening process (absorbance increase) as well, but not as quickly. Immediately after the irradiation has stopped, a recovery process starts in the glass structure. During this period, optical losses of the glass improve, but not to the original level as before the irradiation. During the testing of optic cables for the installation in nuclear power plant containment areas, we observed an unusual recovery process. In the beginning, a healing effect was observed. However, after a few days of recovery, the healing process stopped, and the trend changed again as a worsening of the optical properties was observed. This paper describes experiments which explain the reasons for such an unexpected behaviour.

Voltage Followers for the Design of Sallen-Key Active Rc-Filters

In this paper consider the circuitry of voltage followers (VF) with unity-gain, intended for practical use in active Sallen-Key RC-filters (LPF, HPF, BPF, RF). The results of research and computer modeling of radiation-resistant and low-temperature VF in the LTSpice environment on models of CJFET transistors operating under the influence of neutron flux up to 10e14 n/cm2 and cryogenic temperatures up to -197°C are presented.

Research on temperature sensitivity of Single-event Transient pulse width in 28-nm bulk technology

The influence of temperature on single-event transient (SET) pulse width has always been a hot issue in the field of anti-irradiation. Based on 3D-TCAD simulation, the temperature sensitivity of the SET pulse width of 28-nm bulk devices has been studied. The simulation results show that the electrical characteristics of the device shows an anti-temperature effect, but the worst case of SET pulse width still occurs at high temperature rather than low temperature. The influence of the triple-well structure on the temperature sensitivity of the SET pulse width has also been studied. The N+ deep well can significantly increase the SET pulse width when hitting NMOS device and enhance the temperature sensitivity of the SET pulse width. The research content of this article will provide reference for the design of radiation resistant chip.

The relationship between the single event upset and the order of sensitive transistors in flip-flop layout

Traditionally, it is believed that only reverse biased PN junctions can collect ionized electron-hole pairs. Therefore, only the drain of the transistor in the off-state can be considered as a sensitive node, which is easy to absorb charge and cause upset. This paper finds that on-state transistors can also become sensitive nodes. This paper studies the relationship between SEU and the order of transistors in the flip-flop layout. It is found that the adjacent placement of on-state sensitive transistors can promote the occurrence of SEU, and a targeted hardened plan is proposed. The results of this paper are helpful for the design of the radiation-resistant layout of the flip-flop.

GC investigation of post-irradiation oxidation phenomena on polypropylene

The paper summarizes the results of research on gas products of polypropylene (PP) radiolysis. Particular attention was paid to the phenomena of post-radiation degradation of PP. The protective effect of selected aromatic compounds was investigated. The research was carried out both from the point of view of obtaining radiation-resistant PP varieties and the possibility of accelerating biodegradation phenomena, e.g., PP/cellulose composition. The phenomena of post-radiation chain oxidation of PP were investigated by gas chromatography (GC). The GC in the system used (packed column, thermal conductivity detector, argon – carrier gas) enables the determination of H2, O2, CO, and CH4 in one measurement. The samples were irradiated with electron beams (EBs) accelerated in accelerators: Elektronika 10/10 with a power of 10 kW and energy of 10 MeV and LAE 13/9 with a power of 9 kW and energy up to 13 MeV. In the tests, PP without stabilizing additives (obtained directly from the production line) and non-stabilized styrene were used. Radiolytic efficiency of hydrogen evolution allowed us to estimate the number of originally formed free radicals. The maintenance of the secondary oxidation processes was the loss of oxygen and the formation of oxidation products (CO, CH4). Attention is paid to the protective effect of aromatic compounds (polystyrene (PS), polyethylene terephthalate (PET), anthracene, fluoranthene, acenaphthene, pyrene, naphthalene) both at the stage of hydrogen atom separation and the secondary oxidation process. The examples of post-radiation oxidation of PP irradiated in cryogenic conditions (–196°C) are presented. All used aromatic compounds showed a protective effect in PP radiolysis. We suppose that this phenomenon is responsible for the charge transfer along the polymer chain from the ionization spurs to the aromatic compound. The protective ranges of PS in PP radiolysis were estimated for the variously prepared PP/PS type compositions from 6 mers to 28 mers.

Combined Therapy with microRNA-Expressing Salmonella and Irradiation in Melanoma

Anticancer treatment strategies using bacteria as a vector are currently expanding with the development of anticancer drugs. Here, we present a research strategy to develop anticancer drugs using bacteria that contain miRNAs. We also present a strategy for the development of novel bacterial anticancer drugs in combination with radiation. Salmonella strains expressing miRNA were produced by modifying the miRNA expression vector encoding INHA, a radiation-resistant gene developed previously. The anticancer effect of INHA was confirmed using skin cancer cell lines. We also tested a combination strategy comprising bacteria and radiation for its anticancer efficacy against radiation-resistant mouse melanoma to increase the efficacy of radiation therapy as a novel strategy. The recombinant strain was confirmed to promote effective cell death even when combined with radiation therapy, which exerts its cytotoxicity by enhancing reactive oxygen species production. Moreover, a combination of bacterial and radiation therapy enhanced radiotherapy efficacy. When combined with radiation therapy, bacterial therapy exhibited effective anti-cancer properties even when administered to animals harboring radiation-resistant tumors. This strategy may promote the secretion of cytokines in cells and more effectively reduce the number of bacteria remaining in the animal. Thus, this study may lead to the development of a strategy to improve the effectiveness of radiation therapy using Salmonella expressing cancer-specific miRNA for intractable cancers such as those resistant to radiation.

Understanding the Radiation Resistance Mechanisms of Nanocrystalline Metals from Atomistic Simulation

Metallic materials produce various structural defects in the radiation environment, resulting in serious degradation of material properties. An important way to improve the radiation-resistant ability of materials is to give the microstructure of materials a self-healing ability, to eliminate the structural defects. The research and development of new radiation-resistant materials with excellent self-healing ability, based on defects control, is one of the hot topics in materials science. Compared with conventional coarse-grained materials, nanocrystalline metals with a high density of grain boundary (GB) show a higher ability to resist radiation damage. However, the mechanism of GB’s absorption of structural defects under radiation is still unclear, and how to take advantage of the GB properties to improve the radiation resistance of metallic materials remains to be further investigated. In recent decades, atomistic simulation has been widely used to study the radiation responses of different metals and their underlying mechanisms. This paper briefly reviews the progress in studying radiation resistance mechanisms of nanocrystalline metals by employing computational simulation at the atomic scale.