scholarly journals 3D Hydrodynamic Modelling Enhances the Design of Tendaho Dam Spillway, Ethiopia

Water ◽  
2019 ◽  
Vol 11 (1) ◽  
pp. 82
Author(s):  
Getnet Kebede Demeke ◽  
Dereje Hailu Asfaw ◽  
Yilma Seleshi Shiferaw
Keyword(s):  
Stokes Equations ◽  
Flow Behavior ◽  
Fluid Flows ◽  
Three Dimensions ◽  
Navier Stokes ◽  
Hydraulic Structures ◽  
Hydrodynamic Modelling ◽  
Navier Stokes Equations ◽  
Pressure Distributions ◽  
Computational Fluid Dynamics Cfd

Hydraulic structures are often complex and in many cases their designs require attention so that the flow behavior around hydraulic structures and their influence on the environment can be predicted accurately. Currently, more efficient computational fluid dynamics (CFD) codes can solve the Navier–Stokes equations in three-dimensions and free surface computation in a significantly improved manner. CFD has evolved into a powerful tool in simulating fluid flows. In addition, CFD with its advantages of lower cost and greater flexibility can reasonably predict the mean characteristics of flows such as velocity distributions, pressure distributions, and water surface profiles of complex problems in hydraulic engineering. In Ethiopia, Tendaho Dam Spillway was constructed recently, and one flood passed over the spillway. Although the flood was below the designed capacity, there was an overflow due to superelevation at the bend. Therefore, design of complex hydraulic structures using the state-of- art of 3D hydrodynamic modelling enhances the safety of the structures. 3D hydrodynamic modelling was used to verify the safety of the spillway using designed data and the result showed that the constructed hydraulic section is not safe unless it is modified.

Numerical Study on Impeller Performance of Mini Hydro Turbine

2015 ◽  
Vol 772 ◽  
pp. 552-555 ◽  
Author(s):  
Kyu Han Kim ◽  
Joni Cahyono
Keyword(s):  
Stokes Equations ◽  
Numerical Study ◽  
Flow Behavior ◽  
Three Dimensional ◽  
Horizontal Axis ◽  
Navier Stokes ◽  
Navier Stokes Equations ◽  
Hydro Turbine ◽  
Pressure Distributions ◽  
Power Outputs

The aim of this paper is to numerically explore the feasibility of designing a Mini-Hydro turbine. The interest for this kind of horizontal axis turbine relies on its versatility. In the present study, the numerical solution of the discredited three-dimensional, incompressible Navier-Stokes equations over an unstructured grid is accomplished with an ANSYS program. In this study, a mini hydro turbine (3kW) has been considered for utilization of horizontal axis impeller. The turbine performance and flow behavior have been evaluated by means of numerical simulations. Moreover, the performance of the impeller varied in the pressure distribution, torque, rotational speed and power generated by the different number of blades and angles. The results trends are similar between the highest pressure distributions at the impeller also produced highest power outputs on 6 numbers of blades at impeller. The model has been validated, comparing numerical results with available experimental data.

Computational Investigation of Tower Shadow Effects on Wind Turbines

2011 ◽  
Author(s):  
Adrian Sescu ◽  
Brett Andersen ◽  
Abdollah A. Afjeh
Keyword(s):  
Wind Turbines ◽  
Stokes Equations ◽  
Three Dimensions ◽  
Navier Stokes ◽  
Turbulent Regime ◽  
Navier Stokes Equations ◽  
Shadow Effect ◽  
Horizontal Axis Wind Turbines ◽  
Computational Fluid Dynamics Cfd ◽  
Tower Shadow

In this paper, a Computational Fluid Dynamics (CFD) analysis of tower shadow effect associated with downwind configuration horizontal axis wind turbines (HAWT) is presented. This work is part of a large project focused on the design and installation of a multi-megawatt, downwind configuration, offshore HAWT in Lake Erie. The numerical tool is a dedicated commercial CFD solver, capable of performing accurate simulations in three dimensions, by solving the Navier-Stokes equations in turbulent regime. The tower shadow effect is analyzed by comparing results from the downwind configuration to results from the corresponding upwind configuration and free rotor.

Singularities

2018 ◽  
Author(s):  
S. G. Rajeev
Keyword(s):  
Stokes Equations ◽  
Negative Answer ◽  
Three Dimensions ◽  
Picard Iteration ◽  
Navier Stokes ◽  
Scale Invariant ◽  
Navier Stokes Equations ◽  
L2 Norm ◽  
Two Dimensional Flow ◽  
Physical Consequences

The initial value problem of the incompressible Navier–Stokes equations is explained. Leray’s classic study of it (using Picard iteration) is simplified and described in the language of physics. The ideas of Lebesgue and Sobolev norms are explained. The L2 norm being the energy, cannot increase. This gives sufficient control to establish existence, regularity and uniqueness in two-dimensional flow. The L3 norm is not guaranteed to decrease, so this strategy fails in three dimensions. Leray’s proof of regularity for a finite time is outlined. His attempts to construct a scale-invariant singular solution, and modern work showing this is impossible, are then explained. The physical consequences of a negative answer to the regularity of Navier–Stokes solutions are explained. This chapter is meant as an introduction, for physicists, to a difficult field of analysis.

Development of SIMPLE-Like Algorithms for Incompressible Navier-Stokes Equations in Liquid Processing of Materials

2012 ◽  
Vol 184-185 ◽  
pp. 944-948 ◽  
Author(s):  
Hai Jun Gong ◽  
Yang Liu ◽  
Xue Yi Fan ◽  
Da Ming Xu
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Stokes Equations ◽  
Simple Algorithm ◽  
Navier Stokes ◽  
Incompressible Fluid Flow ◽  
Numerical Accuracy ◽  
Simple Scheme ◽  
Navier Stokes Equations ◽  
Computational Fluid Dynamics Cfd

For a clear and comprehensive opinion on segregated SIMPLE algorithm in the area of computational fluid dynamics (CFD) during liquid processing of materials, the most significant developments on the SIMPLE algorithm and its variants are briefly reviewed. Subsequently, some important advances during last 30 years serving as increasing numerical accuracy, enhancing robustness and improving efficiency for Navier–Stokes (N-S) equations of incompressible fluid flow are summarized. And then a so-called Direct-SIMPLE scheme proposed by the authors of present paper introduced, which is different from SIMPLE-like schemes, no iterative computations are needed to achieve the final pressure and velocity corrections. Based on the facts cited in present paper, it conclude that the SIMPLE algorithm and its variants will continue to evolve aimed at convergence and accuracy of solution by improving and combining various methods with different grid techniques, and all the algorithms mentioned above will enjoy widespread use in the future.

Navier Stokes Derivative Estimates in Three Dimensions with Boundary Values and Body Forces

1991 ◽  
Vol 43 (6) ◽  
pp. 1161-1212 ◽  
Author(s):  
G. F. D. Duff
Keyword(s):  
Stokes Equations ◽  
Finite Energy ◽  
Three Dimensions ◽  
Navier Stokes ◽  
Boundary Values ◽  
Vector Solution ◽  
Navier Stokes Equations ◽  
Body Forces ◽  
Derivatives Of

AbstractFor a vector solution u(x, t) with finite energy of the Navier Stokes equations with body forces and boundary values on a region Ω ⊆ R3 for t > 0, conditions are established on the L6/5(Ω) and L2(Ω) norms of derivatives of the data that ensure the estimates and max , up to any given integer value of the weighted order 2r+s, where r or s = s1 + s2 + s3 > 0 and 0 < T < ∞.

scholarly journals CLSVOF Method to Study the Formation Process of Taylor Cone in Crater-Like Electrospinning of Nanofibers

2014 ◽  
Vol 2014 ◽  
pp. 1-12 ◽  
Author(s):  
Yong Liu ◽  
Jia Li ◽  
Yu Tian ◽  
Xia Yu ◽  
Jian Liu ◽  
...  
Keyword(s):  
Viscous Liquid ◽  
Formation Process ◽  
Stokes Equations ◽  
Taylor Cone ◽  
Computational Method ◽  
Navier Stokes ◽  
Two Phase ◽  
Navier Stokes Equations ◽  
Cone Formation ◽  
Computational Fluid Dynamics Cfd

The application of two-phase computational fluid dynamics (CFD) for simulating crater-like Taylor cone formation dynamics in a viscous liquid is a challenging task. An interface coupled level set/volume-of-fluid (CLSVOF) method and the governing equations based on Navier-Stokes equations were employed to simulate the crater-like Taylor cone formation process. The computational results of the dynamics of crater-like Taylor cone slowly formed on a free liquid surface produced by a submerged nozzle in a viscous liquid were presented in this paper. Some experiments with different air pressures were carried out to evaluate the simulation results. The results from both CFD and experimental observations were compared and analyzed. The numerical results were consistent with the experimental results. Our study showed that the CLSVOF method gave convincing results, and the computational method is robust to extreme variations in interfacial topology.

Sign in / Sign up

Export Citation Format

Share Document