Using Cosmic-Ray Neutron Probes in Validating Satellite Soil Moisture Products and Land Surface Models

Soil moisture content is one of the most important parameters of hydrological studies. Cosmic-ray neutron sensing is a promising proximal soil moisture sensing technique at intermediate scale and high temporal resolution. In this study, we validate satellite soil moisture products for the period of March 2015 and December 2018 by using several existing Cosmic Ray Neutron Probe (CRNP) stations of the COSMOS database and a CRNP station that was installed in the south part of Turkey in October 2016. Soil moisture values, which were inferred from the CRNP station in Turkey, are also validated using a time domain reflectometer (TDR) installed at the same location and soil water content values obtained from a land surface model (Noah LSM) at various depths (0.1 m, 0.3 m, 0.6 m and 1.0 m). The CRNP has a very good correlation with TDR where both measurements show consistent changes in soil moisture due to storm events. Satellite soil moisture products obtained from the Soil Moisture and Ocean Salinity (SMOS), the METOP-A/B Advanced Scatterometer (ASCAT), Soil Moisture Active Passive (SMAP), Advanced Microwave Scanning Radiometer 2 (AMSR2), Climate Change Initiative (CCI) and a global land surface model Global Land Data Assimilation System (GLDAS) are compared with the soil moisture values obtained from CRNP stations. Coefficient of determination ( r 2 ) and unbiased root mean square error (ubRMSE) are used as the statistical measures. Triple Collocation (TC) was also performed by considering soil moisture values obtained from different soil moisture products and the CRNPs. The validation results are mainly influenced by the location of the sensor and the soil moisture retrieval algorithm of satellite products. The SMAP surface product produces the highest correlations and lowest errors especially in semi-arid areas whereas the ASCAT product provides better results in vegetated areas. Both global and local land surface models’ outputs are highly compatible with the CRNP soil moisture values.

Download Full-text

Improving soil moisture predictions from a land surface model by optimisation of pedotransfer functions.

10.5194/ismc2021-81 ◽

2021 ◽

Author(s):

Elizabeth Cooper ◽

Eleanor Blyth ◽

Hollie Cooper ◽

Richard Ellis ◽

Ewan Pinnington ◽

...

Keyword(s):

Soil Moisture ◽

Land Surface ◽

Land Surface Model ◽

Cosmic Ray ◽

Pedotransfer Functions ◽

Small Scale ◽

Surface Model ◽

Land Surface Models ◽

Field Scale ◽

Surface Models

Accurate soil moisture predictions from land surface models are important in hydrological, ecological and agricultural applications. Despite increasing availability of wide area soil moisture measurements, few studies have combined soil moisture predictions from models with in-situ observations beyond the point scale. This work uses the LAVENDAR data assimilation framework to markedly improve soil moisture estimates from the JULES land surface model using field scale Cosmic Ray Neutron sensor observations from the UKCEH COSMOS-UK network. Rather than directly updating modelled soil moisture estimates towards measured values, we optimize constants in the underlying pedotransfer functions (PTF) which relate soil texture to soil hydraulics parameters. In this way we generate a single set of newly calibrated PTFs based on field scale observations from a number of UK sites with different soil types. We demonstrate that calibrating PTFs in this way can improve the performance of JULES. Further, we suggest that calibrating PTFs for the soils on which they are to be used and at the scales at which land surface models are applied (rather than on small-scale soil samples) will ultimately improve the performance of land surface models, potentially leading to improvements in flood, drought and climate projections.

Download Full-text

Evaluating a land surface model at a water-limited site: implications for land surface contributions to droughts and heatwaves

10.5194/egusphere-egu21-4083 ◽

2021 ◽

Author(s):

Mengyuan Mu ◽

Martin De Kauwe ◽

Anna Ukkola ◽

Andy Pitman ◽

Teresa Gimeno ◽

...

Keyword(s):

Soil Moisture ◽

Land Surface ◽

Land Surface Model ◽

Heat Fluxes ◽

Surface Model ◽

Strong Impact ◽

Water Fluxes ◽

Land Surface Models ◽

Groundwater Aquifer ◽

Surface Models

Land surface models underpin coupled climate model projections of droughts and heatwaves. However, the lack of simultaneous observations of individual components of evapotranspiration, concurrent with root-zone soil moisture, has limited previous model evaluations. Here, we use a comprehensive set of observations from a water-limited site in southeastern Australia including both evapotranspiration and soil moisture to a depth of 4.5 m to evaluate the Community Atmosphere-Biosphere Land Exchange (CABLE) land surface model. We demonstrate that alternative process representations within CABLE had the capacity to improve simulated evapotranspiration, but not necessarily soil moisture dynamics - highlighting problems of model evaluations against water fluxes alone. Our best simulation was achieved by resolving a soil evaporation bias; a more realistic initialisation of the groundwater aquifer state; higher vertical soil resolution informed by observed soil properties; and further calibrating soil hydraulic conductivity. Despite these improvements, the role of the empirical soil moisture stress function in influencing the simulated water fluxes remained important: using a site calibrated function reduced the soil water stress on plants by 36 % during drought and 23 % at other times. These changes in CABLE not only improve the seasonal cycle of evapotranspiration, but also affect the latent and sensible heat fluxes during droughts and heatwaves. The range of parameterisations tested led to differences of ~150 W m-2 in the simulated latent heat flux during a heatwave, implying a strong impact of parameterisations on the capacity for evaporative cooling and feedbacks to the boundary layer (when coupled). Overall, our results highlight the opportunity to advance the capability of land surface models to capture water cycle processes, particularly during meteorological extremes, when sufficient observations of both evapotranspiration fluxes and soil moisture profiles are available.

Download Full-text

Evaluating a land surface model at a water-limited site: implications for land surface contributions to droughts and heatwaves

Hydrology and Earth System Sciences ◽

10.5194/hess-25-447-2021 ◽

2021 ◽

Vol 25 (1) ◽

pp. 447-471

Author(s):

Mengyuan Mu ◽

Martin G. De Kauwe ◽

Anna M. Ukkola ◽

Andy J. Pitman ◽

Teresa E. Gimeno ◽

...

Keyword(s):

Soil Moisture ◽

Land Surface ◽

Land Surface Model ◽

Heat Fluxes ◽

Surface Model ◽

Strong Impact ◽

Water Fluxes ◽

Land Surface Models ◽

Groundwater Aquifer ◽

Surface Models

Abstract. Land surface models underpin coupled climate model projections of droughts and heatwaves. However, the lack of simultaneous observations of individual components of evapotranspiration, concurrent with root-zone soil moisture, has limited previous model evaluations. Here, we use a comprehensive set of observations from a water-limited site in southeastern Australia including both evapotranspiration and soil moisture to a depth of 4.5 m to evaluate the Community Atmosphere-Biosphere Land Exchange (CABLE) land surface model. We demonstrate that alternative process representations within CABLE had the capacity to improve simulated evapotranspiration, but not necessarily soil moisture dynamics–highlighting problems of model evaluations against water fluxes alone. Our best simulation was achieved by resolving a soil evaporation bias, using a more realistic initialisation of the groundwater aquifer state and higher vertical soil resolution informed by observed soil properties, and further calibrating soil hydraulic conductivity. Despite these improvements, the role of the empirical soil moisture stress function in influencing the simulated water fluxes remained important: using a site-calibrated function reduced the soil water stress on plants by 36 % during drought and 23 % at other times. These changes in CABLE not only improve the seasonal cycle of evapotranspiration but also affect the latent and sensible heat fluxes during droughts and heatwaves. The range of parameterisations tested led to differences of ∼150 W m−2 in the simulated latent heat flux during a heatwave, implying a strong impact of parameterisations on the capacity for evaporative cooling and feedbacks to the boundary layer (when coupled). Overall, our results highlight the opportunity to advance the capability of land surface models to capture water cycle processes, particularly during meteorological extremes, when sufficient observations of both evapotranspiration fluxes and soil moisture profiles are available.

Download Full-text

Response of the surface climate to different land surface models: WRF sensitivity to surface model options

10.5194/egusphere-egu21-15663 ◽

2021 ◽

Author(s):

Daniela C.A. Lima ◽

Rita M. Cardoso ◽

Pedro M.M. Soares

Keyword(s):

Soil Moisture ◽

Land Surface ◽

Wrf Model ◽

Land Surface Model ◽

Heat Fluxes ◽

Surface Processes ◽

Surface Model ◽

Land Surface Models ◽

Land Surface Processes ◽

Surface Models

The Weather Research and Forecasting (WRF) model version 4.2 includes different land surface schemes, allowing a better representation of the land surface processes. Four simulations with the WRF model differing in land surface models and options were investigated as a sensitivity study over the European domain. These experiments span from 2004-2006 with a one-month spin-up and were performed at 0.11o horizontal resolution with 50 vertical levels, following the CORDEX guidelines. The lateral boundary conditions were driven by ERA5 reanalysis from European Centre for Medium-Range Weather Forecasts. For the first experiment, the Noah land surface model was used. For the remaining simulations, the Noah-MP (multi-physics) land surface model was used with different runoff and groundwater options: (1) original surface and subsurface runoff (free drainage), (2) TOPMODEL with groundwater and (3) Miguez-Macho & Fan groundwater scheme. The physical parameterizations options are the same for all simulations. These experiments allow the analysis of the sensitivity of different land surface options and to understand how the representation of land surface processes impacts on the atmosphere properties. This study focusses on the investigation of land-atmosphere feedbacks trough the analysis of the soil moisture &#8211; temperature and soil moisture &#8211; precipitation interactions, latent and sensible heat fluxes, and moisture fluxes. The influence of different surface model options on atmospheric boundary layer is also explored.Acknowledgements. The authors wish to acknowledge the LEADING (PTDC/CTA-MET/28914/2017) project funded by FCT. The authors would like to acknowledge the financial support FCT through project UIDB/50019/2020 &#8211; Instituto Dom Luiz.

Download Full-text

On the Nature of Soil Moisture in Land Surface Models

Journal of Climate ◽

10.1175/2009jcli2832.1 ◽

2009 ◽

Vol 22 (16) ◽

pp. 4322-4335 ◽

Cited By ~ 308

Author(s):

Randal D. Koster ◽

Zhichang Guo ◽

Rongqian Yang ◽

Paul A. Dirmeyer ◽

Kenneth Mitchell ◽

...

Keyword(s):

Soil Moisture ◽

Land Surface ◽

Land Surface Model ◽

Global Scale ◽

Surface Model ◽

Land Surface Models ◽

Common Information ◽

Surface Models ◽

Moisture State ◽

Environmental Prediction

Abstract The soil moisture state simulated by a land surface model is a highly model-dependent quantity, meaning that the direct transfer of one model’s soil moisture into another can lead to a fundamental, and potentially detrimental, inconsistency. This is first illustrated with two recent examples, one from the National Centers for Environmental Prediction (NCEP) involving seasonal precipitation forecasting and another from the realm of ecological modeling. The issue is then further addressed through a quantitative analysis of soil moisture contents produced as part of a global offline simulation experiment in which a number of land surface models were driven with the same atmospheric forcing fields. These latter comparisons clearly demonstrate, on a global scale, the degree to which model-simulated soil moisture variables differ from each other and that these differences extend beyond those associated with model-specific layer thicknesses or soil texture. The offline comparisons also show, however, that once the climatological statistics of each model’s soil moisture variable are accounted for (here, through a simple scaling using the first two moments), the different land models tend to produce very similar information on temporal soil moisture variability in most parts of the world. This common information can perhaps be used as the basis for successful mappings between the soil moisture variables in different land models.

Download Full-text

Improving soil moisture prediction of a high-resolution land surface model by parameterising pedotransfer functions through assimilation of SMAP satellite data

Hydrology and Earth System Sciences ◽

10.5194/hess-25-1617-2021 ◽

2021 ◽

Vol 25 (3) ◽

pp. 1617-1641

Author(s):

Ewan Pinnington ◽

Javier Amezcua ◽

Elizabeth Cooper ◽

Simon Dadson ◽

Rich Ellis ◽

...

Keyword(s):

Soil Moisture ◽

Data Assimilation ◽

Land Surface ◽

Mean Squared Error ◽

Land Surface Model ◽

Cosmic Ray ◽

Pedotransfer Functions ◽

Surface Model ◽

Squared Error ◽

Surface Models

Abstract. Pedotransfer functions are used to relate gridded databases of soil texture information to the soil hydraulic and thermal parameters of land surface models. The parameters within these pedotransfer functions are uncertain and calibrated through analyses of point soil samples. How these calibrations relate to the soil parameters at the spatial scale of modern land surface models is unclear because gridded databases of soil texture represent an area average. We present a novel approach for calibrating such pedotransfer functions to improve land surface model soil moisture prediction by using observations from the Soil Moisture Active Passive (SMAP) satellite mission within a data assimilation framework. Unlike traditional calibration procedures, data assimilation always takes into account the relative uncertainties given to both model and observed estimates to find a maximum likelihood estimate. After performing the calibration procedure, we find improved estimates of soil moisture and heat flux for the Joint UK Land Environment Simulator (JULES) land surface model (run at a 1 km resolution) when compared to estimates from a cosmic-ray soil moisture monitoring network (COSMOS-UK) and three flux tower sites. The spatial resolution of the COSMOS probes is much more representative of the 1 km model grid than traditional point-based soil moisture sensors. For 11 cosmic-ray neutron soil moisture probes located across the modelled domain, we find an average 22 % reduction in root mean squared error, a 16 % reduction in unbiased root mean squared error and a 16 % increase in correlation after using data assimilation techniques to retrieve new pedotransfer function parameters.

Download Full-text

Evaluating a land surface model at a water-limited site: implications for land surface contributions to droughts and heatwaves

10.5194/hess-2020-339 ◽

2020 ◽

Author(s):

Mengyuan Mu ◽

Martin G. De Kauwe ◽

Anna M. Ukkola ◽

Andy J. Pitman ◽

Teresa E. Gimeno ◽

...

Keyword(s):

Soil Moisture ◽

Land Surface ◽

Land Surface Model ◽

Heat Fluxes ◽

Surface Model ◽

Strong Impact ◽

Water Fluxes ◽

Land Surface Models ◽

Groundwater Aquifer ◽

Surface Models

Abstract. Land surface models underpin coupled climate model projections of droughts and heatwaves. However, the lack of simultaneous observations of individual components of evapotranspiration, concurrent with root-zone soil moisture, has limited previous model evaluations. Here, we use a comprehensive set of observations from a water-limited site in southeastern Australia including both evapotranspiration and soil moisture to 4.5 m depth to evaluate the Community Atmosphere-Biosphere Land Exchange (CABLE) land surface model. We demonstrated that alternative process representations within CABLE had the capacity to improve simulated evapotranspiration, but not necessarily soil moisture dynamics – highlighting problems of model evaluations against water fluxes alone. Our best simulation was achieved by resolving a soil evaporation bias; a more realistic initialisation of the groundwater aquifer state; higher vertical soil resolution informed by observed soil properties; and further calibrating soil hydraulic conductivity. Despite these improvements, the role of the empirical soil moisture stress function in simulated water fluxes remained important: using a site calibrated function reduced the median level of water stress by 36 % during drought and 23 % at other times. These changes in CABLE not only improve the seasonal cycle of evapotranspiration, but also affect the latent and sensible heat fluxes during droughts and heatwaves. Alternative parameterisations led to differences of ~ 150 W m−2 in the simulated latent heat flux during a heatwave, implying a strong impact of parameterisations on the capacity for evaporative cooling and feedbacks to the boundary layer (when coupled). Overall, our results highlight the opportunity to advance the capability of land surface models to capture water cycle processes, particularly during meteorological extremes, when sufficient observations of both evapotranspiration fluxes and soil moisture profiles are available.

Download Full-text

Improving Soil Moisture Prediction of a High–Resolution Land Surface Model by Parameterising Pedotransfer Functions through Assimilation of SMAP Satellite Data

10.5194/hess-2020-303 ◽

2020 ◽

Author(s):

Ewan Pinnington ◽

Javier Amezcua ◽

Elizabeth Cooper ◽

Simon Dadson ◽

Rich Ellis ◽

...

Keyword(s):

Soil Moisture ◽

Data Assimilation ◽

Land Surface ◽

Mean Squared Error ◽

Land Surface Model ◽

Cosmic Ray ◽

Pedotransfer Functions ◽

Surface Model ◽

Squared Error ◽

Surface Models

Abstract. Pedotransfer functions are used to relate gridded databases of soil texture information to the soil hydraulic and thermal parameters of land surface models. The parameters within these pedotransfer functions are uncertain and calibrated through analyses of point soil samples. How these calibrations relate to the soil parameters at the spatial scale of modern land surface models is unclear, because gridded databases of soil texture represent an area average. We present a novel approach for calibrating such pedotransfer functions to improve land surface model soil moisture prediction by using observations from the Soil Moisture Active Passive (SMAP) satellite mission within a data assimilation framework. Unlike traditional calibration procedures data assimilation always takes into account the relative uncertainties given to both model and observed estimates to find a maximum likelihood estimate. After performing the calibration procedure we find improved estimates of soil moisture for the JULES land surface model (run at a 1 km resolution) when compared to estimates from a cosmic-ray soil moisture monitoring network (COSMOS-UK). The spatial resolution of these COSMOS probes is much more representative of the 1 km model grid than traditional point based soil moisture sensors. For 11 cosmic-ray neutron soil moisture probes located across the modelled domain we find an average 22 % reduction in root-mean squared error, a 16 % reduction in unbiased root-mean squared error and a 16 % increase in correlation after using data assimilation techniques to retrieve new pedotransfer function parameters.

Download Full-text

Developing a triple tree-ring constraint for tree growth and physiology in a global land surface model

10.5194/egusphere-egu21-13546 ◽

2021 ◽

Author(s):

Jonathan Barichivich ◽

Philippe Peylin ◽

Valérie Daux ◽

Camille Risi ◽

Jina Jeong ◽

...

Keyword(s):

Tree Ring ◽

Land Surface ◽

Forest Ecosystems ◽

Ring Width ◽

Land Surface Model ◽

Surface Model ◽

Growth Variability ◽

Tree Ring Data ◽

Surface Models ◽

Global Land

Gradual anthropogenic warming and parallel changes in the major global biogeochemical cycles are slowly pushing forest ecosystems into novel growing conditions, with uncertain consequences for ecosystem dynamics and climate. Short-term forest responses (i.e., years to a decade) to global change factors are relatively well understood and skilfully simulated by land surface models (LSMs). However, confidence on model projections weaken towards longer time scales and to the future, mainly because the long-term responses (i.e., decade to century) of these models remain unconstrained. This issue limits confidence on climate model projections. Annually-resolved tree-ring records, extending back to pre-industrial conditions, have the potential to constrain model responses at interannual to centennial time scales. Here, we constrain the representation of tree growth and physiology in the ORCHIDEE global land surface model using the simulated interannual variability of tree-ring width and carbon (&#916;13C) and oxygen (&#948;18O) stable isotopes in six sites in boreal and temperate Europe.&#160; The model simulates &#916;13C (r = 0.31-0.80) and &#948;18O (r = 0.36-0.74) variability better than tree-ring width variability (r < 0.55), with an overall skill similar to that of other state-of-the-art models such as MAIDENiso and LPX-Bern. These results show that growth variability is not well represented, and that the parameterization of leaf-level physiological responses to drought stress in the temperate region can be improved with tree-ring data. The representation of carbon storage and remobilization dynamics is critical to improve the realism of simulated growth variability, temporal carrying over and recovery of forest ecosystems after climate extremes. The simulated physiological response to rising CO2 over the 20th century is consistent with tree-ring data in the temperate region, despite an overestimation of seasonal drought stress and stomatal control on photosynthesis. Photosynthesis correlates directly with isotopic variability, but correlations with &#948;18O combine physiological effects and climate variability impacts on source water signatures. The integration of tree-ring data (i.e. the triple constraint: width, &#916;13C and &#948;18O) and land surface models as demonstrated here should contribute towards reducing current uncertainties in forest carbon and water cycling.

Download Full-text

Using data assimilation to optimize pedotransfer functions using large-scale in-situ soil moisture observations

10.5194/hess-2020-359 ◽

2020 ◽

Author(s):

Elizabeth Cooper ◽

Eleanor Blyth ◽

Hollie Cooper ◽

Rich Ellis ◽

Ewan Pinnington ◽

...

Keyword(s):

Soil Moisture ◽

Data Assimilation ◽

Land Surface ◽

Large Scale ◽

Pedotransfer Functions ◽

Surface Model ◽

Climate Projections ◽

Land Surface Models ◽

Surface Models

Abstract. Soil moisture predictions from land surface models are important in hydrological, ecological and meteorological applications. In recent years the availability of wide-area soil-moisture measurements has increased, but few studies have combined model-based soil moisture predictions with in-situ observations beyond the point scale. Here we show that we can markedly improve soil moisture estimates from the JULES land surface model using field scale observations and data assimilation techniques. Rather than directly updating soil moisture estimates towards observed values, we optimize constants in the underlying pedotransfer functions, which relate soil texture to JULES soil physics parameters. In this way we generate a single set of newly calibrated pedotransfer functions based on observations from a number of UK sites with different soil textures. We demonstrate that calibrating a pedotransfer function in this way can improve the performance of land surface models, leading to the potential for better flood, drought and climate projections.

Download Full-text