Major oxide geochemistry and origin of the Troodos ophiolitic complex

1980 ◽  
Vol 103 (1) ◽  
pp. 59-65
Author(s):  
Theodoulos M. Pantazis
2014 ◽  
Vol 2014 ◽  
pp. 1-11 ◽  
Author(s):  
Nursel Öksüz ◽  
Neslihan Okuyucu

The Artova ophiolite complex (AOC) is exposed along the northwestern and eastern margins of Yozgat area in Turkey. The Mn-deposit in the Buyukmahal area is part of this ophiolite complex. The deposit is in banded and lenticular forms and hosted by a radiolarite unit overlying the volcanics. Pyrolusite and magnetite are the main minerals of the manganese ore in the Buyukmahal (Yozgat) area. The gang minerals in the deposit are composed only of quartz and calcite. In this study, mineralogy, major oxide, trace element and REE contents of Buyukmahal manganese mineralization are evaluated. The geochemical data indicate that Buyukmahal mineralization does not originate from a pure hydrothermal or pure hydrogenous source but from a system consisting of both sources. It is also asserted that the mineralization was first developed on a sea floor spreading center within the Alpine Ophiolite System and then obducted as part of the AOC.


1998 ◽  
Vol 27 ◽  
pp. 285-289 ◽  
Author(s):  
S. G. Moreton ◽  
J. L. Smellie

Quaternary deposits in six sediment cores from the Scotia Sea, Antarctica, were examined for the presence of volcanic ash layers. The cores were recovered from water depths of 3369-4025 m. Altogether, 23 ash layers were found, 18 of which have been investigated by electron-probe microanalysis. Deception Island is identified as the source of all the ash layers analyzed. The upper ash layer in each core can be correlated across all six cores, over a distance of -100 km, on the basis of its unusual bimodal composition, major oxide geochemistry and stratigraphie position. Two other ash layers can also be correlated between several of the cores.


2015 ◽  
Vol 62 (1) ◽  
pp. 1-6 ◽  
Author(s):  
Reza Tamasgavabari ◽  
Kurosh Jafarzadeh ◽  
Masumeh Madanipoor ◽  
Hassan Badri

Purpose – The purpose of this paper was the investigation of corrosion behaviour of Ni-6Al-10Cu-11Fe-15Cr alloy, as a candidate material for inert anodes in aluminium electrolysis industries. Design/methodology/approach – The samples were prepared by casting, and then were oxidized at 1,000°C for 30, 70 and 100 hours, respectively. To determine corrosion resistant of the samples, they were exposed to molten cryolite at 930°C for 70 hours. Then the surface layers were studied. Findings – Results showed that by extension of corrosion time, thickness of oxide layers increases. In addition, it was found that Al2O3 and Cr2O3 are the major oxide compounds that appear on the surface of the sample. Originality/value – In this paper, the Ni-6Al-10Cu-11Fe-15Cr nickel base alloy has been selected to study its corrosion behaviour in molten cryolite as a candidate for inert anodes. It was found out that by addition Al and Cr into the alloy composition, due to formation of Al2O3 and Cr2O3 following oxidation, the substrate was protected from corrosion attacks.


2016 ◽  
Author(s):  
Alicja Wypych ◽  
K. R. Sicard ◽  
R. J. Gillis ◽  
L. L. Lande ◽  
T. J. Naibert ◽  
...  

2015 ◽  
Vol 7 (2) ◽  
pp. 1827-1876 ◽  
Author(s):  
J. Escuder-Viruete ◽  
A. Suárez-Rodríguez ◽  
J. Gabites ◽  
A. Pérez-Estaún

Abstract. In northern Hispaniola, the Imbert Formation (Fm) has been interpreted as an orogenic "mélange" originally deposited as trench-fill sediments, an accretionary (subduction) complex formed above a SW-dipping subduction zone, or the sedimentary result of the early oblique collision of the Caribbean plate with the Bahama Platform in the middle Eocene. However, new stratigraphical, structural, geochemical and geochronological data from northern Hispaniola indicate that the Imbert Fm constitutes a coarsening-upward stratigraphic sequence that records the transition of the sedimentation from a pre-collisional forearc to a syn-collisional piggy-back basin. This piggy-back basin was transported on top of the Puerto Plata ophiolitic complex slab and structurally underlying accreted units of the Rio San Juan complex, as it was emplaced onto the North America continental margin units. The Imbert Fm unconformably overlies different structural levels of the Caribbean subduction-accretionary prism, including a supra-subduction zone ophiolite, and consists of three laterally discontinuous units that record the exhumation of the underlying basement. The distal turbiditic lower unit includes the latest volcanic activity of the Caribbean island arc; the more proximal turbiditic intermediate unit is moderately affected by syn-sedimentary faulting; and the upper unit is a (caotic) olistostromic unit, composed of serpentinite-rich polymictic breccias, conglomerates and sandstones, strongly deformed by syn-sedimentary faulting, slumping and sliding processes. The Imbert Fm is followed by subsidence and turbiditic deposition of the overlying El Mamey Group. The 40Ar / 39Ar plagioclase plateau ages obtained in gabbroic rocks from the Puerto Plata ophiolitic complex indicate its exhumation at ∼ 45–40 Ma (lower-to-middle Eocene), contemporaneously to the sedimentation of the overlying Imbert Fm. These cooling ages imply the uplift to the surface and submarine erosion of the complex to be the source of the ophiolitic fragments in the Imbert Fm, during of shortly after the emplacement of the intra-oceanic Caribbean island-arc onto the continental margin.


2009 ◽  
Vol 9 (15) ◽  
pp. 2671-2687 ◽  
Author(s):  
M. Delavari ◽  
S. Amini ◽  
E. Saccani ◽  
L. Beccaluva

Sign in / Sign up

Export Citation Format

Share Document