Faculty Opinions recommendation of Cryo-EM structure of haemoglobin at 3.2 Å determined with the Volta phase plate.

Author(s):  
John Rubinstein
Keyword(s):  
Author(s):  
William Krakow ◽  
Benjamin Siegel

Unwin has used a metallized non-conducting thread in the back focal plane of the objective lens that stops out a portion of the unscattered beam, takes on a localized positive charge and thus produces an additional phase shift to give a different transfer function of the lens. Under the particular conditions Unwin used, the phase contrast image was shifted to bright phase contrast for optimum focus.We have investigated the characteristics of this type of electrostatic phase plate, both analytically and experimentally, as functions of the magnitude of charge and defocus. Phase plates have been constructed by using Wollaston wire to mount 0.25μ diameter platinum wires across apertures ranging from 50 to 200μ diameter and vapor depositing SiO and gold on the mounted wires to give them the desired charging characteristics. The net charge was varied by adjusting only the bias on the Wehnelt shield of the gun, and hence the beam currents and effective size of the source.


Micromachines ◽  
2021 ◽  
Vol 12 (6) ◽  
pp. 683
Author(s):  
Huiliang Jin ◽  
Caixue Tang ◽  
Haibo Li ◽  
Yuanhang Zhang ◽  
Yaguo Li

The continuous phase plate (CPP) is the vital diffractive optical element involved in laser beam shaping and smoothing in high-power laser systems. The high gradients, small spatial periods, and complex features make it difficult to achieve high accuracy when manufacturing such systems. A high-accuracy and high-efficiency surface topography manufacturing method for CPP is presented in this paper. The atmospheric pressure plasma jet (APPJ) system is presented and the removal characteristics are studied to obtain the optimal processing parameters. An optimized iterative algorithm based on the dwell point matrix and a fast Fourier transform (FFT) is proposed to improve the accuracy and efficiency in the dwell time calculation process. A 120 mm × 120 mm CPP surface topography with a 1326.2 nm peak-to-valley (PV) value is fabricated with four iteration steps after approximately 1.6 h of plasma processing. The residual figure error between the prescribed surface topography and plasma-processed surface topography is 28.08 nm root mean square (RMS). The far-field distribution characteristic of the plasma-fabricated surface is analyzed, for which the energy radius deviation is 11 μm at 90% encircled energy. The experimental results demonstrates the potential of the APPJ approach for the manufacturing of complex surface topographies.


2014 ◽  
Author(s):  
Jing Zhu ◽  
Qiang Song ◽  
Jian Wang ◽  
Weirui Yue ◽  
Fang Zhang ◽  
...  

2011 ◽  
Vol 17 (S2) ◽  
pp. 984-985
Author(s):  
G Camacho-Bragado ◽  
H Qian ◽  
F Dixon ◽  
H Bryant ◽  
M Malac
Keyword(s):  

Extended abstract of a paper presented at Microscopy and Microanalysis 2011 in Nashville, Tennessee, USA, August 7–August 11, 2011.


2014 ◽  
Vol 85 (7) ◽  
pp. 073701
Author(s):  
Yoshinori Iketaki ◽  
Katsuichi Kitagawa ◽  
Kohjiro Hidaka ◽  
Naoki Kato ◽  
Akira Hirabayashi ◽  
...  
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document