scholarly journals Miller cycle and exhaust gas recirculation for a naturally aspirated lean-burn gas engine

2017 ◽  
Author(s):  
Denis Neher
2019 ◽  
pp. 146808741986473 ◽  
Author(s):  
Chris A Van Roekel ◽  
David T Montgomery ◽  
Jaswinder Singh ◽  
Daniel B Olsen

Due to the market presence that natural gas has and is expected to have in the future energy sector, research and development of novel natural gas combustion strategies to increase power density, lower total emissions, and increase overall efficiency is warranted. Dilution whether by excess air or by exhaust gas recirculation has historically been implemented on diesel, natural gas, and gasoline engines to mitigate various regulated emissions. In the large industrial natural gas engine industry, excess air dilution or ultra-lean-burn operation has afforded lean-burn engines increased power density and reduced NO x emissions. This advance in technology has allowed lean-burn engines to compete in markets such as electrical power generation which previously they had not been able. However, natural gas engines utilizing a non-selective catalytic reduction system or three-way catalyst must operate under stoichiometric conditions and thus are limited in power density by exhaust gas temperatures. In previous gasoline small engine research, a novel exhaust gas recirculation technique called dedicated exhaust gas recirculation was shown to have a positive impact on engine-out emissions of NO x and unburned hydrocarbons while also lowering exhaust component temperatures. This work seeks to understand the consequences of implementing a dedicated exhaust gas recirculation system on a multi-cylinder stoichiometric industrial natural gas engine. The results of this initial evaluation demonstrate reductions in engine-out NO x and CO emissions and improvements in engine-out exhaust gas temperatures with the dedicated exhaust gas recirculation technique. However, in a low-turbulence combustion chamber, dedicated exhaust gas recirculation significantly lowers the overall rate of combustion and results in significant differences in cylinder-to-cylinder combustion.


Author(s):  
Yoshifuru Nitta ◽  
Dong-Hoon Yoo ◽  
Sumito Nishio ◽  
Yasuhisa Ichikawa ◽  
Koichi Hirata ◽  
...  

The need for reductions of nitrogen oxides (NOx), sulfur oxides (SOx), and carbon dioxide (CO2) emissions has been acknowledged on the global level. However, it is difficult to meet the strengthened emissions regulations by using the conventional marine diesel engines. Therefore, lean burn gas engines have been recently attracting attention in the maritime industry. Because they use natural gas as fuel and can simultaneously reduce both NOx and CO2 emissions. On the other hand, since methane is the main component of natural gas, the slipped methane, which is the unburned methane emitted from the lean burn gas engines, might have a potential impact on global warming. The authors have proposed a combined exhaust gas recirculation (C-EGR) system to reduce the slipped methane from the gas engines and NOx from marine diesel engines by providing the exhaust gas from lean burn gas engine to the intake manifold of the marine diesel engine using a blower. Since the exhaust gas from the gas engine includes slipped methane, this system could reduce both the NOx from the marine diesel engine and the slipped methane from the lean burn gas engine simultaneously. This paper introduces the details of the proposed C-EGR system and presents the experimental results of emissions characteristics on the C-EGR system. As a result, it was confirmed that the C-EGR system attained more than 75% reduction of the slipped methane in the intake gas. Additionally, the NOx emission from the diesel engine decreased with the effect of the exhaust gas recirculation (EGR) system.


2021 ◽  
Vol 268 ◽  
pp. 01017
Author(s):  
Jin Zhao ◽  
Zhijun Li ◽  
Shilong Li ◽  
Shijin Shuai ◽  
Shiyu Liu ◽  
...  

A LNT (lean NOx trap) model coupled with EGR (exhaust gas recirculation) was developed based on the Langmuir–Hinshelwood mechanism to investigate the EGR effects on NOx adsorption pathway of LNT catalysts with temperature changed in range 150℃~550℃. Both the nitrate and nitrite adsorption paths were considered for the NOx storage process in the model as well as the spillover of stored NOx between Ba and Pt sites. The data and validation for modelling were from literatures of predecessors and our previous lean-burn gasoline engine experiment*. The model quantified the contributions of both nitrate route and nitrite route to the NOx storage with change of EGR rate (0%~30%) under raw emission atmosphere from tested gasoline engine. The model captured key feature of different trends of nitrate route and nitrite route with increasing temperature (150℃~550℃) under EGR rate varying from 0% to 25%. The LNT model provided insight of reaction mechanism for interpreting the behaviour of NOx storage with change of GER rate and temperature, which contributed to improve the NOx storage capacity when mapping EGR rate for lean-burn engine and catalyst operation strategy optimization.


2020 ◽  
Author(s):  
Adrian Cooper ◽  
Anthony Harrington ◽  
Michael Bassett ◽  
Simon Reader ◽  
Michael Bunce

Sign in / Sign up

Export Citation Format

Share Document