scholarly journals Water Quality Modeling of Bhima River by using HEC-RAS Software

2020 ◽  
Vol 9 (3) ◽  
pp. 2886-2889
Keyword(s):  
Water Quality ◽  
River Water ◽  
Hydrodynamic Model ◽  
Algal Blooms ◽  
Agricultural Runoff ◽  
Water Quality Modeling ◽  
Water Quality Model ◽  
River Water Quality ◽  
Water Levels ◽  
Quality Model

The River has got religious importance in India. The Bhima River is beginning from Bhimashankar hill and it flows through some parts of Maharashtra and Karnataka state. The assessment of water quality for the development of the places near the bank of River is important. These is controlled by various manmade activities. The quality of river water resources is facing problems because of the continuous agricultural runoff, development and urbanization. Due to mixing of nutrients causes algal blooms, which results eutrophication. The modeling of water quality can be deliberated as useful tool for assessing river water. Bhima River is demarcated as a major and important water body located in Pandharpur, dist. Solapur, Maharashtra. As Pandharpur is having historical background and known as one of the famous Holly places in Maharashtra, this place is facing huge population fluctuation due to migrated pilgrims and rapid growth of urbanization. These two things detrimentally affect River water quality. The main objective of current study was to develop a hydrodynamic model combined with river water quality model for the Bhima River to measure and recognize the processes harmful for the River. For Bhima River a hydrodynamic model was constructed using the HEC-RAS 4.1 software combined with a river water quality model to estimate the amount, distribution and sources of algae, nitrate and temperature. The river model has standardized with the help of previous water levels near the Pandharpur region. It has standardized and calibrated for the assessed parameters by competing them with the present data. The result showed a relationship between DO and temperature range. DO level in Pandharpur and Gopalpur were observed to be fluctuating with respective temperature and during Vari season. However, wastewater discharge from Nalha in sample station 3 i.e. Goplapur shows slit changes in DO and due to this there is necessity to learn other parameters also.

Identifiability analysis of the CSTR river water quality model

2006 ◽  
Vol 53 (1) ◽  
pp. 93-99 ◽  
Author(s):  
J. Chen ◽  
Y. Deng
Keyword(s):  
Water Quality ◽  
River Water ◽  
Sampling Frequency ◽  
Water Quality Model ◽  
River Water Quality ◽  
Quality Model ◽  
Identifiability Analysis ◽  
Quality Models ◽  
Observational Errors ◽  
Water Quality Models

Conceptual river water quality models are widely known to lack identifiability. The causes for that can be due to model structure errors, observational errors and less frequent samplings. Although significant efforts have been directed towards better identification of river water quality models, it is not clear whether a given model is structurally identifiable. Information is also limited regarding the contribution of different unidentifiability sources. Taking the widely applied CSTR river water quality model as an example, this paper presents a theoretical proof that the CSTR model is indeed structurally identifiable. Its uncertainty is thus dominantly from observational errors and less frequent samplings. Given the current monitoring accuracy and sampling frequency, the unidentifiability from sampling frequency is found to be more significant than that from observational errors. It is also noted that there is a crucial sampling frequency between 0.1 and 1 day, over which the simulated river system could be represented by different illusions and the model application could be far less reliable.

scholarly journals Extension of the River Water Quality Model No. 1 with the fate of pesticides

2011 ◽  
Vol 14 (1) ◽  
pp. 48-64 ◽  
Author(s):  
Veerle C. J. De Schepper ◽  
Katrijn M. A. Holvoet ◽  
Lorenzo Benedetti ◽  
Piet Seuntjens ◽  
Peter A. Vanrolleghem
Keyword(s):  
Water Quality ◽  
Water Column ◽  
River Water ◽  
Bulk Water ◽  
Transport Processes ◽  
Water Quality Model ◽  
River Water Quality ◽  
Model Parameters ◽  
Quality Model ◽  
Run Off

The existing River Water Quality Model No. 1 (RWQM1) was extended with processes determining the fate of non-volatile pesticides in the water phase and sediments. The exchange of pesticides between the water column and the sediment is described by three transport processes: diffusion, sedimentation and resuspension. Burial of sediments is also included. The modified model was used to simulate the concentrations of diuron and chloridazon in the river Nil. A good agreement was found between the simulated pesticide concentrations and measured values resulting from a four-month intensive monitoring campaign. The simulation results indicate that pesticide concentrations in the bulk water are not sensitive to the selected biochemical model parameters. It seems that these concentrations are mainly determined by the imposed upstream concentrations, run-off and direct losses. The high concentrations in the bulk water were not observed in the sediment pore water due to a limited exchange between the water column and the sediment. According to a sensitivity analysis, the observed pesticide concentrations are highly sensitive to the diffusion and sorption coefficients. Therefore, model users should determine these parameters with accuracy in order to reduce the degree of uncertainty in their results.

RIVER WATER QUALITY MODEL VERIFICATION THROUGH A GIS BASED SOFTWARE

2009 ◽  
Vol 42 (11) ◽  
pp. 798-803 ◽  
Author(s):  
M.K. Yetik ◽  
M. Yüceer ◽  
R. Berber ◽  
E. Karadurmuş
Keyword(s):  
Water Quality ◽  
River Water ◽  
Water Quality Model ◽  
River Water Quality ◽  
Model Verification ◽  
Quality Model

River Water Quality Model no. 1 (RWQM1): III. Biochemical submodel selection

2001 ◽  
Vol 43 (5) ◽  
pp. 31-40 ◽  
Author(s):  
P. Vanrolleghem ◽  
D. Borchardt ◽  
M. Henze ◽  
W. Rauch ◽  
P. Reichert ◽  
...  
Keyword(s):  
Water Quality ◽  
River Water ◽  
Water Quality Model ◽  
River Water Quality ◽  
Quality Model ◽  
Conversion Model ◽  
General Rules ◽  
Model Component ◽  
Model Features ◽  
Selection Of

The new River Water Quality Model no.1 introduced in the two accompanying papers by Shanahan et al. and Reichert et al. is comprehensive. Shanahan et al. introduced a six-step decision procedure to select the necessary model features for a certain application. This paper specifically addresses one of these steps, i.e. the selection of submodels of the comprehensive biochemical conversion model introduced in Reichert et al. Specific conditions for inclusion of one or the other conversion process or model component are introduced, as are some general rules that can support the selection. Examples of simplified models are presented.

River Water Quality Model no. 1 (RWQM1): Case study II. Oxygen and nitrogen conversion processes in the River Glatt (Switzerland)

2001 ◽  
Vol 43 (5) ◽  
pp. 51-60 ◽  
Author(s):  
P. Reichert
Keyword(s):  
Water Quality ◽  
River Water ◽  
Growth Parameters ◽  
Water Quality Model ◽  
River Water Quality ◽  
Data Sets ◽  
Quality Model ◽  
Chemical Equilibria ◽  
Nitrogen Conversion ◽  
Algae And Bacteria

Various simplifications of the river water quality model no. 1 are applied to data sets from the river Glatt in Switzerland. In a first application, the biomass responsible for nitrogen and oxygen conversion processes is quantified based on known reaeration rates, measured concentrations of ammonia, nitrite and oxygen and assumed growth parameters of algae and bacteria. In a second application, the model is extended to calculate chemical equilibria of inorganic carbon compounds dissolved in the water and daily variations in pH. The influence of partially unknown inflow concentrations and of calcite precipitation on fluctuations in electrical conductivity and pH are discussed. In the last model, the processes of growth of sessile algae and bacteria, detachment of algae, and grazing by benthic organisms are introduced. Due to lack of data for quantifying these processes, this last model application is speculative. Nevertheless, it is interesting because it shows a direction to which river water quality modelling would have to proceed in order to increase its predictive capabilities.

Sign in / Sign up

Export Citation Format

Share Document