scholarly journals Optimal Placement and Capacity of UPFC using JMFALO Technique to Upgrade Power System Dynamic Stability

This paper proposes an optimal placement and capacitance of UPFC for enhancing the dynamic stability of a power system using a new hybrid optimization technique. The hybrid optimization technique is the joined execution of both the moth flame optimization (MFO) and ant lion optimization (ALO) and hence it is named as Joined moth flame ant lion optimization (JMFALO) technique. Here, the MFO technique optimizes the maximum power loss line as the suitable location of the UPFC by considering the variation available in the bus system power flow parameters like voltage, angle, real power and reactive power. Dependent on the ALO technique the influenced location parameters and dynamic stability constraints are restored into secure limits utilizing the optimum capacity of the UPFC with least voltage deviation, loss of power, and reduced installation cost. Subsequently, to restore the dynamic stability constraints at a secure limit the optimized UPFC capacity is utilized. The dynamic stability constraint of the system is power balance constraint, active and reactive power loss, and UPFC installation cost and bus voltage constraints. The proposed technique is implemented in MATLAB/Simulink working platform. The performance of the proposed technique is assessed by utilizing the comparison analysis with the existing techniques.

Author(s):  
Million Alemayehu Bedasso* ◽  
R. Srinu Naik

In order to eliminate active and reactive power losses in the power system, this paper proposes TOPSIS and DE algorithm for determining the best location and parameter settings for the Unified Power Flow Controller (UPFC). To mitigate power losses, the best UPFC allocation can be achieved by re-dispatching load flows in power systems. The cost of incorporating UPFC into the power system. As a consequence, the proposed objective feature in this paper was created to address this problem. The IEEE 14-bus and IEEE 30-bus systems were used as case studies in the MATLAB simulations. When compared to particle swarm optimization, the results show that DE is a simple to use, reliable, and efficient optimization technique than (PSO). The network's active and reactive power losses can be significantly reduced by putting UPFC in the optimum position determined by TOPSIS ranking method.


2021 ◽  
Vol 13 (6) ◽  
pp. 3198
Author(s):  
Hossein Moayedi ◽  
Amir Mosavi

The significance of accurate heating load (HL) approximation is the primary motivation of this research to distinguish the most efficient predictive model among several neural-metaheuristic models. The proposed models are formulated through synthesizing a multi-layer perceptron network (MLP) with ant lion optimization (ALO), biogeography-based optimization (BBO), the dragonfly algorithm (DA), evolutionary strategy (ES), invasive weed optimization (IWO), and league champion optimization (LCA) hybrid algorithms. Each ensemble is optimized in terms of the operating population. Accordingly, the ALO-MLP, BBO-MLP, DA-MLP, ES-MLP, IWO-MLP, and LCA-MLP presented their best performance for population sizes of 350, 400, 200, 500, 50, and 300, respectively. The comparison was carried out by implementing a ranking system. Based on the obtained overall scores (OSs), the BBO (OS = 36) featured as the most capable optimization technique, followed by ALO (OS = 27) and ES (OS = 20). Due to the efficient performance of these algorithms, the corresponding MLPs can be promising substitutes for traditional methods used for HL analysis.


2012 ◽  
Vol 61 (2) ◽  
pp. 239-250 ◽  
Author(s):  
M. Kumar ◽  
P. Renuga

Application of UPFC for enhancement of voltage profile and minimization of losses using Fast Voltage Stability Index (FVSI)Transmission line loss minimization in a power system is an important research issue and it can be achieved by means of reactive power compensation. The unscheduled increment of load in a power system has driven the system to experience stressed conditions. This phenomenon has also led to voltage profile depreciation below the acceptable secure limit. The significance and use of Flexible AC Transmission System (FACTS) devices and capacitor placement is in order to alleviate the voltage profile decay problem. The optimal value of compensating devices requires proper optimization technique, able to search the optimal solution with less computational burden. This paper presents a technique to provide simultaneous or individual controls of basic system parameter like transmission voltage, impedance and phase angle, thereby controlling the transmitted power using Unified Power Flow Controller (UPFC) based on Bacterial Foraging (BF) algorithm. Voltage stability level of the system is defined on the Fast Voltage Stability Index (FVSI) of the lines. The IEEE 14-bus system is used as the test system to demonstrate the applicability and efficiency of the proposed system. The test result showed that the location of UPFC improves the voltage profile and also minimize the real power loss.


2017 ◽  
Vol 2017 ◽  
pp. 1-11 ◽  
Author(s):  
Hamza Yapıcı ◽  
Nurettin Çetinkaya

The power loss in electrical power systems is an important issue. Many techniques are used to reduce active power losses in a power system where the controlling of reactive power is one of the methods for decreasing the losses in any power system. In this paper, an improved particle swarm optimization algorithm using eagle strategy (ESPSO) is proposed for solving reactive power optimization problem to minimize the power losses. All simulations and numerical analysis have been performed on IEEE 30-bus power system, IEEE 118-bus power system, and a real power distribution subsystem. Moreover, the proposed method is tested on some benchmark functions. Results obtained in this study are compared with commonly used algorithms: particle swarm optimization (PSO) algorithm, genetic algorithm (GA), artificial bee colony (ABC) algorithm, firefly algorithm (FA), differential evolution (DE), and hybrid genetic algorithm with particle swarm optimization (hGAPSO). Results obtained in all simulations and analysis show that the proposed method is superior and more effective compared to the other methods.


2021 ◽  
Author(s):  
Hossein Moayedi ◽  
Amir Mosavi

The significance of heating load (HL) accurate approximation is the primary motivation of this research to distinguish the most efficient predictive model among several neural-metaheuristic models. The proposed models are through synthesizing multi-layer perceptron network (MLP) with ant lion optimization (ALO), biogeography-based optimization (BBO), dragonfly algorithm (DA), evolutionary strategy (ES), invasive weed optimization (IWO), and league champion optimization (LCA) hybrid algorithms. Each ensemble is optimized in terms of the operating population. Accordingly, the ALO-MLP, BBO-MLP, DA-MLP, ES-MLP, IWO-MLP, and LCA-MLP presented their best performance for population sizes of 350, 400, 200, 500, 50, and 300, respectively. The comparison was carried out by implementing a ranking system. Based on the obtained overall scores (OSs), the BBO (OS = 36) featured as the most capable optimization technique, followed by ALO (OS = 27) and ES (OS = 20). Due to the efficient performance of these algorithms, the corresponding MLPs can be promising substitutes for traditional methods used for HL analysis.


2020 ◽  
Vol 53 (5) ◽  
pp. 725-731
Author(s):  
Mercy Rosalina Kotapuri ◽  
Rajesh Kumar Samala

The demand on the power system rising more rapidly is causing to increase the power system size and capacity. There is a need of interconnection of various generating stations to meet the increased load demand. Economical unit commitment is necessary for plant operation with the advancement in power system integration. The Economical Power Dispatch (EPD) is to find the most favourable combination of generating systems output powers which reduce the fuel cost by satisfying all system constraints. This research involves the fuzzy logic controller (FLC) has been hybridized with Ant-Lion Optimization (ALO) algorithm for EPD. By using this new hybrid technique, minimization of total operating cost by economically dispatch the power to meet the required load and also minimization of system total losses by optimum allocation of DG units were done. Fuel cost function and demand on system are modeled by fuzzy membership functions. The ALO is used to obtain the schedule the committed generating unit’s outputs so as to meet the required load demand. This proposed FLC based ALO technique executed with MATLAB software and applied on IEEE-30 system. Effectiveness of this projected algorithm is determined and evaluated with standalone techniques like conventional ALO, ALO-PSO algorithms.


Author(s):  
Marouane Rayyam ◽  
Malika Zazi ◽  
Youssef Barradi

PurposeTo improve sensorless control of induction motor using Kalman filtering family, this paper aims to introduce a new metaheuristic optimizer algorithm for online rotor speed and flux estimation.Design/methodology/approachThe main problem with unscented Kalman filter (UKF) observer is its sensibility to the initial values of Q and R. To solve the optimal solution of these matrices, a novel alternative called ant lion optimization (ALO)-UKF is introduced. It is based on the combination of the classical UKF observer and a nature-inspired metaheuristic algorithm, ALO.FindingsSynthesized ALO-UKF has given good results over the famous extended Kalman filter and the classical UKF observer in terms of accuracy and dynamic performance. A comparison between ALO and particle swarm optimization (PSO) was established. Simulations illustrate that ALO recovers rapidly and accurately while PSO has a slower convergence.Originality/valueUsing the proposed approach, tuning the design matrices Q and R in Kalman filtering becomes an easy task with a high degree of accuracy and the constraints of time cost are surmounted. Also, ALO-UKF is an efficient tool to improve estimation performance of states and parameters’ uncertainties of the induction motor. Related optimization technique can be extended to faults monitoring by online identification of their corresponding signatures.


Sign in / Sign up

Export Citation Format

Share Document