scholarly journals Identification of the Sources of Overall Waste Generation that Affects the Well Being of the Environment

2019 ◽  
Vol 8 (3) ◽  
pp. 6684-6687

In the old urban regions, major reconstruction operations are taking place on a fast scale throughout the world, which gives rise to large quantities of Construction and Demolition Waste (CDW). There is a gradual decline in available landfill space, while demand for quarry products is increasing. Because of its non-degradable features, CDW is a significant problem in many nations. Proper CDW management and recycling helps alleviate these issues. The contribution rates from various waste sources improve knowledge-based decision-making in the development of appropriate construction waste reduction strategy. This paper is focused on investigating the rate of recurrence and the seriousness of the contribution of waste sources that affect the well-being of the environment.

2014 ◽  
Vol 955-959 ◽  
pp. 2727-2730
Author(s):  
Juan Liu ◽  
Yong Hai Xue ◽  
Ya Nan Yang

This research makes a tentative study on generation of construction and demolition waste (CDW) in the city of Tianjin. Based on statistic data on construction area, amounts of construction waste, renewal transformation waste and decoration waste are estimated respectively, and summed up to the result of total CDW generation from 1996 to 2012. It shows that total CDW generation in urban area of Tianjin is up to 19.11 million tons in 2012.


2019 ◽  
Vol 37 (8) ◽  
pp. 815-825 ◽  
Author(s):  
Aneetha Vilventhan ◽  
VG Ram ◽  
S Sugumaran

Construction sites are plagued with numerous problems, such as improper planning and management, high amounts of waste generation and low awareness of waste reduction. Construction and demolition waste literature provides several best practises and prescriptive strategies that help minimise waste during construction. However, it lacks in the systematic identification and minimisation approach of all possibilities of waste. Therefore, studies focusing on principles and tools that help systematically analyse the inefficiencies of on-site processes leading to waste generation and philosophies addressing waste minimisation are necessary. As eliminating waste is one of the key lean principles, this article discusses the need and importance of integrating the lean construction with the construction and demolition waste management. This article aims to estimate and assess the causes of waste generation in a high-rise building construction through a case study in Chennai city (India) using value stream mapping, a key lean construction tool. Onsite monitoring and measurement were performed to quantify the amount of waste generated. A waste generation rate of 66.26 kg m−2 was identified, of which concrete, cement mortar and brick waste represented almost 90% of the total construction waste. Direct observation and interviews of site personnel were conducted to understand the causes of waste generation. A strategic framework has been proposed to improve construction and demolition waste minimisation depicting the synergy of combining lean construction principles with construction and demolition waste management strategies. The proposed framework helps in the systematic identification, assessment and minimisation of on-site construction waste generation.


2018 ◽  
Vol 36 (12) ◽  
pp. 1157-1165 ◽  
Author(s):  
Usman A Umar ◽  
Nasir Shafiq ◽  
Mohamed Hasnain Isa

The construction sector is among the fastest growing sectors in Malaysia; it consumes a vast amount of natural resources and produces a massive volume of construction and demolition waste. The waste is collected in a decentralised manner by sub-contracted companies. It is challenging to obtain reliable information on the amount of construction waste generated, because it is hard to determine its exact quantity and composition. Therefore, this study proposes a quantitative construction waste estimation model for residential buildings according to available data collected from the Construction Industry Development Board, Malaysia. In the development of this model, a theoretical investigation of the construction procedure and the construction waste generation process was conducted. The waste generated rate was determined as 25.79 kg m−2 for new residential constructions, which translates into about 553,406 t of anticipated waste annually.


Construction Industry is in the great danger and in a major crisis creating greater impact to the environment. The analysis is carried out in order to find the sources that generates the construction waste at the initial stage and the contribution rates of those waste. This thesis also deals with the waste reduction procedures. Showing the results to the future consideration enabling to the quote “Construction waste management to the future generation


2020 ◽  
Vol 9 (19) ◽  
Author(s):  
Daniela Carnasciali de Andrade Mann ◽  
André Nagalli ◽  
Karina Querne De Carvalho

Resumo Normas relacionadas à gestão de Resíduos de Construção Civil (RCC) estão vigentes no Brasil há mais de uma década. O intuito dessa gestão é amenizar os impactos ambientais decorrentes do gerenciamento indevido desses resíduos. O objetivo do presente trabalho é investigar a conformidade técnica e legal de sistemas de gerenciamento de resíduos de construção civil no município de Curitiba. Para tal, elaborou-se uma lista de verificação baseada nas normas em vigor e em alguns modelos de certificações ambientais, como: LEED, AQUA, CASBEE, BREAM e HQE. 24 obras de edifícios residenciais e comerciais foram  visitadas — com ou sem certificação ambiental. Essa lista de verificação foi aplicada nas construções, para realizar um diagnóstico do setor. Apesar da gestão de resíduos ser obrigatória e restritiva à obtenção dos certificados de conclusão de obra, os resultados da pesquisa demonstraram que há problemas na segregação, acondicionamento e transporte dos resíduos. Entretanto, a falta de conscientização e a aparente conformidade documental não se traduz em efetivo gerenciamento dos RCC. Palavras-chave: Resíduos de construção e demolição. Gestão de resíduos. Resíduos sólidos. Auditorias ambientais. Abstract Standards related to the management of Construction Waste (CW) have been in force in Brazil for more than a decade. The goal of this management is to alleviate the environmental impacts resulting from the poor management of these wastes. The objective of this work is to investigate the technical and legal compliance of construction waste management systems in the city of Curitiba. To this end, a checklist was drawn up based on current standards and on some models of environmental certifications, such as: LEED, AQUA, CASBEE, BREAM and HQE. 24 works of residential and commercial buildings were visited — with or without environmental certification.  A checklist was applied, in these buildings, to promote a diagnosis of the sector. Although waste management is mandatory and restrictive to obtain building completion certificates, the research results showed that there are problems in the segregation, packaging and transport of waste. However, the lack of awareness and the apparent documentary compliance does not translate into effective management of the CW. Keywords:  Construction and demolition waste. Waste management. Solid waste. Environmental audits. Resumen Normas relativas a la gestión de Residuos Sólidos de Construcción Civil (RCC) están vigentes en Brasil hace más de una década. La intención de esa gestión es amenizar los impactos ambientales producidos por la gestión inadecuada de esos residuos. El objetivo de este trabajo es investigar la conformidad técnica y legal de sistemas de gestión de residuos de la construcción civil en el municipio de Curitiba. Para ello, se elaboró una lista de cotejo basada en las normas vigentes y en algunos modelos de certificaciones ambientales como: LEED, AQUA, CASBEE, BREAM y HQE. Se visitaron 24 obras de edificios residenciales y comerciales — con o sin permiso ambiental. Se aplicó esa lista de cotejo en las construcciones, para realizar un diagnóstico des sector. Aunque la gestión de residuos sea obligatoria y restrictiva para la obtención de las certificaciones de conclusión de obra, los resultados de la investigación demostraron que hay problemas en la segregación, acondicionamiento y trasporte de los residuos. Sin embargo, la falta de conciencia y la aparente conformidad en materia de documentos no se traduce en una gestión eficiente de los RCC. Palabras-clave: Residuos de construcción y demolición. Gestión de residuos. Residuos sólidos. Auditorías ambientales.


2019 ◽  
Vol 8 (2S11) ◽  
pp. 2642-2644

The rules and regulations on waste management in the construction and demolition sector are analyzed corresponding to the present scenario of C&DW in India. C&D waste from construction sites has emerged as a significant threat to India because of its severe footprint on the environment. Vast quantities of construction waste will have unfavorable consequences on the surroundings if they are not properly managed. Therefore it is necessary to manage the development of C&DW by the experts within the construction industry. The approach represented is specialized in rules and regulations on waste management so that the environmental impact of construction activities can be minimized.


2010 ◽  
Vol 163-167 ◽  
pp. 4564-4569 ◽  
Author(s):  
Ahmad Firman Masudi ◽  
Che Rosmani Che Hassan ◽  
Noor Zalina Mahmood ◽  
Siti Nazziera Mokhtar ◽  
Nik Meriam Sulaiman

Estimation of construction and demolition (C&D) waste amount is crucial for implementing waste minimization program. Estimation of C&D waste amount generated is a mean in assessing the potential for waste reduction. Thus, a better understanding of C&D waste generation in terms of causes and sources can be achieved. The aim of this paper is to conduct a review on available construction waste quantification methods from previous studies, which have been utilized in certain countries, while attempting to choose the most suitable and applicable method, and to direct future studies for better quantification methods. This review is applicable only for building construction projects and did not include civil/infrastructure, demolition, renovation, and excavation projects. Six quantification methods and/or waste audit tool available from literatures are discussed, which include their limitation and future direction for this study. It is believed that some combination of these quantification methods could make a good impact in accurate numerical estimation of construction waste amount generated in building construction projects. A strong and accurate database as presented by Soliz-Guzman, combined with effective, vital, and resourceful estimation suggested by Jalali’s Global Index (GI), also with the aid of user-friendly software tool like the SMARTAudit could provide an effective and reliable waste quantification.


2019 ◽  
Vol 95 ◽  
pp. 10-21 ◽  
Author(s):  
Rashidul Islam ◽  
Tasnia Hassan Nazifa ◽  
Adhi Yuniarto ◽  
A.S.M. Shanawaz Uddin ◽  
Salmiati Salmiati ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document