A Tentative Study on Quantity of Construction and Demolition Waste Generation in Tianjin

2014 ◽  
Vol 955-959 ◽  
pp. 2727-2730
Author(s):  
Juan Liu ◽  
Yong Hai Xue ◽  
Ya Nan Yang

This research makes a tentative study on generation of construction and demolition waste (CDW) in the city of Tianjin. Based on statistic data on construction area, amounts of construction waste, renewal transformation waste and decoration waste are estimated respectively, and summed up to the result of total CDW generation from 1996 to 2012. It shows that total CDW generation in urban area of Tianjin is up to 19.11 million tons in 2012.

2020 ◽  
Vol 9 (19) ◽  
Author(s):  
Daniela Carnasciali de Andrade Mann ◽  
André Nagalli ◽  
Karina Querne De Carvalho

Resumo Normas relacionadas à gestão de Resíduos de Construção Civil (RCC) estão vigentes no Brasil há mais de uma década. O intuito dessa gestão é amenizar os impactos ambientais decorrentes do gerenciamento indevido desses resíduos. O objetivo do presente trabalho é investigar a conformidade técnica e legal de sistemas de gerenciamento de resíduos de construção civil no município de Curitiba. Para tal, elaborou-se uma lista de verificação baseada nas normas em vigor e em alguns modelos de certificações ambientais, como: LEED, AQUA, CASBEE, BREAM e HQE. 24 obras de edifícios residenciais e comerciais foram  visitadas — com ou sem certificação ambiental. Essa lista de verificação foi aplicada nas construções, para realizar um diagnóstico do setor. Apesar da gestão de resíduos ser obrigatória e restritiva à obtenção dos certificados de conclusão de obra, os resultados da pesquisa demonstraram que há problemas na segregação, acondicionamento e transporte dos resíduos. Entretanto, a falta de conscientização e a aparente conformidade documental não se traduz em efetivo gerenciamento dos RCC. Palavras-chave: Resíduos de construção e demolição. Gestão de resíduos. Resíduos sólidos. Auditorias ambientais. Abstract Standards related to the management of Construction Waste (CW) have been in force in Brazil for more than a decade. The goal of this management is to alleviate the environmental impacts resulting from the poor management of these wastes. The objective of this work is to investigate the technical and legal compliance of construction waste management systems in the city of Curitiba. To this end, a checklist was drawn up based on current standards and on some models of environmental certifications, such as: LEED, AQUA, CASBEE, BREAM and HQE. 24 works of residential and commercial buildings were visited — with or without environmental certification.  A checklist was applied, in these buildings, to promote a diagnosis of the sector. Although waste management is mandatory and restrictive to obtain building completion certificates, the research results showed that there are problems in the segregation, packaging and transport of waste. However, the lack of awareness and the apparent documentary compliance does not translate into effective management of the CW. Keywords:  Construction and demolition waste. Waste management. Solid waste. Environmental audits. Resumen Normas relativas a la gestión de Residuos Sólidos de Construcción Civil (RCC) están vigentes en Brasil hace más de una década. La intención de esa gestión es amenizar los impactos ambientales producidos por la gestión inadecuada de esos residuos. El objetivo de este trabajo es investigar la conformidad técnica y legal de sistemas de gestión de residuos de la construcción civil en el municipio de Curitiba. Para ello, se elaboró una lista de cotejo basada en las normas vigentes y en algunos modelos de certificaciones ambientales como: LEED, AQUA, CASBEE, BREAM y HQE. Se visitaron 24 obras de edificios residenciales y comerciales — con o sin permiso ambiental. Se aplicó esa lista de cotejo en las construcciones, para realizar un diagnóstico des sector. Aunque la gestión de residuos sea obligatoria y restrictiva para la obtención de las certificaciones de conclusión de obra, los resultados de la investigación demostraron que hay problemas en la segregación, acondicionamiento y trasporte de los residuos. Sin embargo, la falta de conciencia y la aparente conformidad en materia de documentos no se traduce en una gestión eficiente de los RCC. Palabras-clave: Residuos de construcción y demolición. Gestión de residuos. Residuos sólidos. Auditorías ambientales.


Author(s):  
Marcos Raiker Printes Ferreira ◽  
David Barbosa de Alencar ◽  
Felipe Wilson Leão da Silva ◽  
Fábio Martins da Silva ◽  
Consuelo Alves da Frota

The lack of stone material in the State of Amazonas and the possibility of using solid waste in the sublayers of pavements motivates the work in question, notably with the purpose of contributing as an alternative technical solution to the paving of the city of Iranduba / AM / BR. Compositions of soil mixed with waste from milled material (MM) and construction and demolition (CDW) were studied. The materials participating in the formulations were physically characterized, as well as the mechanical behavior of the natural soil (NS) and mixtures of soil-20% milled material (NS + 20MM) and soil-20% construction and demolition waste were determined. (NS + 20CDW). The results showed that the compositions with the participation of the milled material were the most efficient relative to the mixtures with the presence of the construction and demolition residue. It is noteworthy that both formulations, referring to natural soil, improved the expansion and presented an increase in the California Bearing Ratio, selection parameters for application in the base and subfloor layers.


2019 ◽  
Vol 37 (8) ◽  
pp. 815-825 ◽  
Author(s):  
Aneetha Vilventhan ◽  
VG Ram ◽  
S Sugumaran

Construction sites are plagued with numerous problems, such as improper planning and management, high amounts of waste generation and low awareness of waste reduction. Construction and demolition waste literature provides several best practises and prescriptive strategies that help minimise waste during construction. However, it lacks in the systematic identification and minimisation approach of all possibilities of waste. Therefore, studies focusing on principles and tools that help systematically analyse the inefficiencies of on-site processes leading to waste generation and philosophies addressing waste minimisation are necessary. As eliminating waste is one of the key lean principles, this article discusses the need and importance of integrating the lean construction with the construction and demolition waste management. This article aims to estimate and assess the causes of waste generation in a high-rise building construction through a case study in Chennai city (India) using value stream mapping, a key lean construction tool. Onsite monitoring and measurement were performed to quantify the amount of waste generated. A waste generation rate of 66.26 kg m−2 was identified, of which concrete, cement mortar and brick waste represented almost 90% of the total construction waste. Direct observation and interviews of site personnel were conducted to understand the causes of waste generation. A strategic framework has been proposed to improve construction and demolition waste minimisation depicting the synergy of combining lean construction principles with construction and demolition waste management strategies. The proposed framework helps in the systematic identification, assessment and minimisation of on-site construction waste generation.


2019 ◽  
Vol 8 (3) ◽  
pp. 6684-6687

In the old urban regions, major reconstruction operations are taking place on a fast scale throughout the world, which gives rise to large quantities of Construction and Demolition Waste (CDW). There is a gradual decline in available landfill space, while demand for quarry products is increasing. Because of its non-degradable features, CDW is a significant problem in many nations. Proper CDW management and recycling helps alleviate these issues. The contribution rates from various waste sources improve knowledge-based decision-making in the development of appropriate construction waste reduction strategy. This paper is focused on investigating the rate of recurrence and the seriousness of the contribution of waste sources that affect the well-being of the environment.


2018 ◽  
Vol 36 (12) ◽  
pp. 1157-1165 ◽  
Author(s):  
Usman A Umar ◽  
Nasir Shafiq ◽  
Mohamed Hasnain Isa

The construction sector is among the fastest growing sectors in Malaysia; it consumes a vast amount of natural resources and produces a massive volume of construction and demolition waste. The waste is collected in a decentralised manner by sub-contracted companies. It is challenging to obtain reliable information on the amount of construction waste generated, because it is hard to determine its exact quantity and composition. Therefore, this study proposes a quantitative construction waste estimation model for residential buildings according to available data collected from the Construction Industry Development Board, Malaysia. In the development of this model, a theoretical investigation of the construction procedure and the construction waste generation process was conducted. The waste generated rate was determined as 25.79 kg m−2 for new residential constructions, which translates into about 553,406 t of anticipated waste annually.


Author(s):  
Anna Luiza Garção Oliveira ◽  
Onaldo José Nunes Filho ◽  
Olívio Fiorese Neto ◽  
Fabrício Borges Amaral ◽  
Regiane Lima Rodrigues ◽  
...  

Abstract: the intense production of construction and demolition waste (RCCD) in city spaces is a central problem for public management, especially in view of the difficulty in finding suitable places for the disposal of this waste without this poses a risk to the environment. In this sense, the present study aims to identify geoenvironmental aspects (geological, geomorphological and hydrological dynamics) for the evaluation of the terrain with the aid of GIS tools and field expeditions. In order to do so, the methodological stages were systematically systematized. They were: thematic maps, interviews with residents and technicians of the City Hall, monitoring of the deposit formation process and final environmental diagnosis. Finally, it was possible to list and propose structural and non-structural, corrective and mitigating measures for the area of deposit and permanent balance with the environment and with the predominant forms of use and occupation of the region.Análise Geoambiental para Delimitação de Área de Depósito de Resíduos de Construção CivilResumo: a  intensa produção de resíduos de construção civil e demolição (RCCD) nos espaços das cidades constitui um problema central para a gestão pública, especialmente diante da dificuldade em se encontrar lugares adequados para deposição destes resíduos sem que isso configure um risco à população . Nesse sentido, o presente estudo visa elencar aspectos geoambientais (geológicos, geomorfológicos e dinâmica hidrológica) para avaliação do terreno com o auxílio de ferramentas SIG e expedições de campo. Para tanto, sistematizou-se, sequencialmente, as etapas metodológicas, sendo elas: elaboração de mapas temáticos, entrevistas com moradores e técnicos da Prefeitura Municipal, acompanhamento do processo de formação do depósito e diagnóstico ambiental final. Por fim, foi possível elencar e propor medidas estruturais e não-estruturais, corretivas e mitigadoras para a área do depósito possibilitando equilíbrio ambiental em consonância com as formas de uso e ocupação predominantes da região. 


2021 ◽  
Vol 14 (3) ◽  
pp. 108-118
Author(s):  
Mohammed Abdulnafaa ◽  
Ayman W. Aldabag ◽  
Hanan H. Alghyat

Demolition and construction waste are among the topics that focus by many researchers. The ‎methods of reuse of waste materials must reduce the economic and environmental pressure of their ‎presence in various regions. Before 2014, the city of Mosul contained relatively small quantities of ‎demolition and construction debris, especially concrete rubble, asphalt materials, and bricks (they formed ‎approximately 80% of the construction and demolition debris). These materials increased very greatly ‎after the liberation operations and the widespread destruction of large parts of the city and became a great ‎problem in the reconstruction operations. There is no clear plan yet in the city to deal with this debris, and it ‎is disposed of by moving them to another place or burying them randomly when rebuilding the destroyed ‎parts. This study shows to deal with demolition and construction debris in Mosul after liberation and during ‎reconstruction operations. Also, many sources and data dealing with the re-use of demolition and ‎construction debris in the field of geotechnical engineering for operations to improve the engineering ‎properties of soils are presented. Many papers show the possibility of using construction and demolition waste as an alternative base or sub-base materials, fill for embankments, or increase durability and reduce the swelling ‎and plasticity ‎of clay.  The study concludes that the researches and data can be used to deal with ‎the rubble of demolition and construction in Mosul in a way that enables to benefit from it economically ‎and environmentally.‎


Designs ◽  
2021 ◽  
Vol 5 (2) ◽  
pp. 26
Author(s):  
Michael M. Santos ◽  
João C. G. Lanzinha ◽  
Ana Vaz Ferreira

Having in mind the objectives of the United Nations Development Agenda 2030, which refers to the sustainable principles of a circular economy, it is urgent to improve the performance of the built environment. The existing buildings must be preserved and improved in order to reduce their environmental impact, in line with the need to revert climate change and reduce the occurrence of natural disasters. This work had as its main goal to identify and define a methodology for promoting the rehabilitation of buildings in the Ponte Gêa neighborhood, in the city of Beira, Mozambique, with an emphasis on energy efficiency, water efficiency, and construction and demolition waste management. The proposed methodology aims to create a decision support method for creating strategic measures to be implemented by considering the three specific domains—energy, water, and waste. This model allows for analyzing the expected improvement according to the action to be performed, exploring both individual and community solutions. It encompasses systems of standard supply that can reveal greater efficiency and profitability. Thus, the in-depth knowledge of the characteristics of urban space and buildings allows for establishing guidelines for the renovation process of the neighborhood.


2019 ◽  
Vol 8 (2S11) ◽  
pp. 2642-2644

The rules and regulations on waste management in the construction and demolition sector are analyzed corresponding to the present scenario of C&DW in India. C&D waste from construction sites has emerged as a significant threat to India because of its severe footprint on the environment. Vast quantities of construction waste will have unfavorable consequences on the surroundings if they are not properly managed. Therefore it is necessary to manage the development of C&DW by the experts within the construction industry. The approach represented is specialized in rules and regulations on waste management so that the environmental impact of construction activities can be minimized.


Sign in / Sign up

Export Citation Format

Share Document