scholarly journals A Digital Heterodyne 2-150 kHz Measurement Method

2021 ◽  
Author(s):  
Paul Wright ◽  
Deborah Ritzmann
Keyword(s):  
Measurement Method ◽  
Power Grid ◽  
New Method ◽  
Digital Method ◽  
Frequency Range ◽  
Multi Resolution Analysis ◽  
Resolution Analysis ◽  
Conducted Emissions

This paper describes a new method for measurements of signals in the 2–150 kHz frequency range, as required to support the regulation of conducted emissions on the power grid. The digital method is based on heterodyning, decimation and multi resolution analysis.<div><br></div>

scholarly journals A Digital Heterodyne 2-150 kHz Measurement Method

2021 ◽  
Author(s):  
Paul Wright ◽  
Deborah Ritzmann
Keyword(s):  
Measurement Method ◽  
Power Grid ◽  
New Method ◽  
Digital Method ◽  
Frequency Range ◽  
Multi Resolution Analysis ◽  
Resolution Analysis ◽  
Conducted Emissions

This paper describes a new method for measurements of signals in the 2–150 kHz frequency range, as required to support the regulation of conducted emissions on the power grid. The digital method is based on heterodyning, decimation and multi resolution analysis.<div><br></div>

scholarly journals Measurement of 2-150 kHz Conducted Emissions in Power Networks

2021 ◽  
Author(s):  
Deborah Ritzmann ◽  
Paul Wright ◽  
Jan Meyer ◽  
Victor Khokhlov ◽  
David De la Vega ◽  
...  
Keyword(s):  
Power Grid ◽  
Measurement Methods ◽  
Frequency Range ◽  
Power Networks ◽  
Comparison Results ◽  
Alternative Approaches ◽  
Conducted Emissions

A framework for the comparison of measurement methods of conducted emissions in the frequency range 2-150 kHz is presented. In addition to present non-normative methods published by the IEC, alternative approaches in the literature are considered. Furthermore, test signals and key metrics are described. The comparison results will provide a baseline for specification of a new normative method for power grid measurements.

scholarly journals Measurement of 2-150 kHz Conducted Emissions in Power Networks

2021 ◽  
Author(s):  
Deborah Ritzmann ◽  
Paul Wright ◽  
Jan Meyer ◽  
Victor Khokhlov ◽  
David De la Vega ◽  
...  
Keyword(s):  
Power Grid ◽  
Measurement Methods ◽  
Frequency Range ◽  
Power Networks ◽  
Comparison Results ◽  
Alternative Approaches ◽  
Conducted Emissions

A framework for the comparison of measurement methods of conducted emissions in the frequency range 2-150 kHz is presented. In addition to present non-normative methods published by the IEC, alternative approaches in the literature are considered. Furthermore, test signals and key metrics are described. The comparison results will provide a baseline for specification of a new normative method for power grid measurements.

New aspects of power grid facilities personnel workplaces electromagnetic environment

2020 ◽  
Vol 60 (9) ◽  
pp. 569-574
Author(s):  
Nina B. Rubtsova ◽  
Sergey Yu. Perov ◽  
Olga V. Belaya ◽  
Tatiana A. Konshina
Keyword(s):  
Transmission Lines ◽  
Power Transmission ◽  
Power Grid ◽  
Spectral Characteristics ◽  
Ground Level ◽  
Frequency Characteristics ◽  
Frequency Range ◽  
Electromagnetic Environment ◽  
Limit Values ◽  
Special Assessment

Introduction. Electromagnetic safety of power grid facilities staff requires the exclusion of electromagnetic fields (EMF) harmful effects. EMF is evaluated by 50 Hz electric and magnetic fields (EF and MF) values in the framework of working conditions special assessment, and very rarely the analysis of the electromagnetic environment (EME) is carried out in depth. The aim of the study - EME hygienic assessment of power grid EHV facilities personnel workplace with adequate 50 Hz EF and MF levels evaluation as well as the analysis of EF and MF in the frequency range from 5 Hz to 500 Hz amplitude-frequency characteristics. Materials and methods. 50 Hz EF and MF values assessment was carried out on open switchgears (S) of substations and within sanitary breaks of 500 and 750 kV overhead power transmission lines (OTL). Measurements along to OTL trasses was performed using matrix-based method. Measurements and analysis of EF and MF values in 5-500 Hz frequency range amplitude-frequency characteristics were performed in the territory of 500 and 750 kV S. Results. Power frequency 50 Hz measurements results at 500 and 750 kV S ground-level personnel workplaces showed the presence of an excess of permissible limit values by EF intensity and the absence of an excess by MF. The measured EF values within 500 and 750 kV OTL sanitary gaps require limiting the working time of linemen due to the excess of the hygienic norms for full work shift, while the MP levels were almost completely within the standard values for persons not occupationally connected with electrical installations maintenance. MF and EE frequency range from 50 Hz to 500 Hz spectral characteristics analysis showed that 3rd harmonic percentage does not exceed 2.5% for EF and 6% for MF of the main level, the level of the 5th harmonic does not exceed 1% for EF and 3.5% for MF, the level of the 7th harmonic does not exceed 0.2% for EF and 0.8% for MF. These data show despite its low levels the contribution of MF different harmonics in a possible adverse impact on humane than EF corresponding harmonics. Conclusions. There was the confirmation of the previously justified use of the "matrix" scheme for of EF and MF values measurement along OTL routes. The relevance of to EF and MF all frequency components expos ure assessing possible health risk in extremely high voltage S territories and under OTL, based on international recommendations due to the lack of sanitary regulations in the Russian Federation for >50 Hz-30 kHz EF and MF, is shown.

scholarly journals On Recovery Guarantees for One-Bit Compressed Sensing on Manifolds

2021 ◽  
Vol 65 (4) ◽  
pp. 953-998
Author(s):  
Mark A. Iwen ◽  
Felix Krahmer ◽  
Sara Krause-Solberg ◽  
Johannes Maly
Keyword(s):  
Compressed Sensing ◽  
Numerical Experiments ◽  
Optimal Scaling ◽  
Intrinsic Dimension ◽  
Recovery Method ◽  
Multi Resolution Analysis ◽  
Resolution Analysis

AbstractThis paper studies the problem of recovering a signal from one-bit compressed sensing measurements under a manifold model; that is, assuming that the signal lies on or near a manifold of low intrinsic dimension. We provide a convex recovery method based on the Geometric Multi-Resolution Analysis and prove recovery guarantees with a near-optimal scaling in the intrinsic manifold dimension. Our method is the first tractable algorithm with such guarantees for this setting. The results are complemented by numerical experiments confirming the validity of our approach.

scholarly journals Simulation of response spectrum-compatible ground motions using wavelet-based multi-resolution analysis

2021 ◽  
pp. 002029402110130
Author(s):  
Guan Chen ◽  
Zhiren Zhu ◽  
Jun Hu
Keyword(s):  
Ground Motion ◽  
Response Spectrum ◽  
Ground Motions ◽  
Power Spectra ◽  
Simulation Method ◽  
Eurocode 8 ◽  
Effective Response ◽  
Multi Resolution Analysis ◽  
Resolution Analysis ◽  
Simulated Ground Motions

This study proposed a simple and effective response spectrum-compatible ground motions simulation method to mitigate the scarcity of ground motions on seismic hazard analysis base on wavelet-based multi-resolution analysis. The feasibility of the proposed method is illustrated with two recorded ground motions in El Mayor-Cucapah earthquake. The results show that the proposed method enriches the ground motions exponentially. The simulated ground motions agree well with the attenuation characteristics of seismic ground motion without modulating process. Moreover, the pseudo-acceleration response spectrum error between the recorded ground motion and the average of the simulated ground motions is 5.2%, which fulfills the requirement prescribed in Eurocode 8 for artificially simulated ground motions. Besides, the cumulative power spectra between the simulated and recorded ground motions agree well on both high- and low-frequency regions. Therefore, the proposed method offers a feasible alternative in enriching response spectrum-compatible ground motions, especially on the regions with insufficient ground motions.

Sign in / Sign up

Export Citation Format

Share Document