DEVELOPMENT OF THE "SMART HOUSE" CONTROL SYSTEM

The proposed system allows you to control the parameters of the house using a remote control system. Changes in temperature and humidity in the house are monitored by telephone. The entire lighting system of the house is controlled. If a gas leak or fire occurs in the house, an alarm is triggered and a notification is sent to the phone. If there is unauthorized access to the house, this is detected by a motion sensor and a notification is sent to the phone. Changes in the apartment, which is "under the control" of the system, can be monitored and managed in the "Serial Monitor" section. Selected optical sensors are sensors that capture an optical image and work by analyzing the darkest and brightest parts of the image using algorithms. The level of security increases depending on the sensor's sensing element, so the higher the sensor's resolution, the better the image details. The ultrasonic signal is transmitted to the finger located on the scanner. Due to the presence of pores and other details that are characteristic of each fingerprint, part of this signal is absorbed, and part is returned to the sensor. As a result, the sensor can recognize fingerprints. Password authorization. A password based door lock system is an access control system that allows only authorized persons to enter a restricted area. When an authorized person enters the user ID and password from the keyboard, the door opens and after a few minutes the door closes again. If the code is entered incorrectly three times in a row, the code lock will go into blocking mode. Keywords: "smart house", control system, temperature sensor, motion sensor, telediagnostics, telecontrol.