Nanoaggregates and Selforganization Phenomena in Polyurethane Coumarine Film

2017 ◽  
Vol 54 (3) ◽  
pp. 589-592
Author(s):  
Silviu Gurlui ◽  
Ion Sandu ◽  
Nicanor Cimpoesu ◽  
Valentin Pohoata ◽  
Ioan Gabriel Sandu ◽  
...  
Keyword(s):  
Solid State ◽  
Polymer Films ◽  
Room Temperature ◽  
Ftir Analysis ◽  
Dimer Formation ◽  
Photon Excitation ◽  
Afm Analysis ◽  
Photochemical Properties

The spectroscopic and photochemical properties of polyurethane coumarine (PUC) in solid state were investigated at room temperature under once-photon excitation. One photon induced photocycloaddition of PUC was investigated and the AFM and spectroscopic FTIR analysis confirmed dimer formation. The AFM analysis shows that the fotodimerization process occurs at the surface of polymer films. The polyurethane coumarine film on CaF2 unirradiated and irradiated underline both the fotodimerization of the polymer films as well as the photoclevage of the polyurethane coumarin.

The Study of Photoreversibility, Photopolimerization and Photocleavage Properties of Polyurethane Coumarin by Means of Electronic Spectrometry and AFM Methods

2017 ◽  
Vol 68 (7) ◽  
pp. 1632-1635
Author(s):  
Silviu Gurlui ◽  
Emil Buruiana ◽  
Ioan Gabriel Sandu ◽  
Mitachi Strat
Keyword(s):  
Uv Irradiation ◽  
Room Temperature ◽  
Dimethyl Formamide ◽  
Photon Excitation ◽  
Photochemical Properties ◽  
Film State

The spectroscopic and photochemical properties of polyurethane coumarin (PUC) in dimethyl sulf-oxide (DMSO), thetra hydro furan (THF), dimethyl formamide (DMF) and film state were investigated at room temperature under one photon excitation. The results show that under irradiation of l ] 310 nm photodimerization process are increased and under UV irradiation with l[ 260 nm, photocleavage of polymer have been evidenced, too.

Improved Sol-Gel Materials for Efficient Solid State Dye Lasers

1993 ◽  
Vol 329 ◽  
Author(s):  
Michael Canva ◽  
Patrick Georges ◽  
Jean-Fran^ois Perelgritz ◽  
Alain Brun ◽  
Fréddric Chaput ◽  
...  
Keyword(s):  
Solid State ◽  
Physical Properties ◽  
Room Temperature ◽  
Sol Gel ◽  
Tunable Lasers ◽  
Optical Quality ◽  
Dye Lasers ◽  
Laser Dyes ◽  
Host Matrix ◽  
Host Matrices

AbstractPhotoresistant laser dyes were trapped in silica based xerogel host matrices to obtain solid state tunable lasers. For this purpose very dense xerogel samples with improved chemical and physical properties were prepared at room temperature by the sol-gel technology. The as-prepared materials were polished to obtain optical quality surfaces and were used as new lasing media.Lasing action of such different dyes as rhodamine, perylene and pyrromethene doping dense sol-gel matrices was demonstrated. Efficiencies of 30 % or lifetimes of more than 100,000 shots were achieved with different new ≤dye dopant/host matrix≥ couples. Their different performances are reviewed and discussed.

Imidazole Promoted Efficient Anomerization of β-D-Glucose Pentaacetate in Organic Solutions and Solid State

2019 ◽  
Author(s):  
Meifeng Wang ◽  
Liyin Zhang ◽  
Yiqun Li ◽  
Liuqun Gu
Keyword(s):  
Solid State ◽  
Organic Solvents ◽  
Room Temperature ◽  
Materials Design ◽  
The Future ◽  
Organic Solutions ◽  
Glucose Pentaacetate

<p></p>Anomerization of glycosides were rarely performed under basic condition due to lack of efficiency. Here an imidazole promoted anomerization of β-D-glucose pentaacetate was developed; and reaction could proceed in both organic solvents and solid state at room temperature. Although mechanism is not yet clear, this unprecedent mild anomerization in solid state may open a new promising way for stereoseletive anomerization of broad glucosides and materials design in the future..

Room-Temperature Chemical Synthesis of C2

2019 ◽  
Author(s):  
Kazunori Miyamoto ◽  
Shodai Narita ◽  
Yui Masumoto ◽  
Takahiro Hashishin ◽  
Mutsumi Kimura ◽  
...  
Keyword(s):  
Chemical Synthesis ◽  
Ground State ◽  
Room Temperature ◽  
Chemical Species ◽  
Quadruple Bond ◽  
Photon Excitation ◽  
Physical Energy ◽  
Theoretical Predictions ◽  
Carbon Arc ◽  
Inherent Nature

Diatomic carbon (C<sub>2</sub>) is historically an elusive chemical species. It has long been believed that the generation of C<sub>2 </sub>requires extremely high “physical” energy, such as an electric carbon arc or multiple photon excitation, and so it has been the general consensus that the inherent nature of C<sub>2 </sub><i>in the ground state </i>is experimentally inaccessible. Here, we present the first “chemical” synthesis of C<sub>2 </sub>in a flask at <i>room temperature or below</i>, providing the first experimental evidence to support theoretical predictions that (1) C<sub>2 </sub>has a singlet biradical character with a quadruple bond, thus settling a long-standing controversy between experimental and theoretical chemists, and that (2) C<sub>2 </sub>serves as a molecular element in the formation of sp<sup>2</sup>-carbon allotropes such as graphite, carbon nanotubes and C<sub>60</sub>.

Circular dichroism and infrared study of β-turn formation in repeat peptides of elastin

1987 ◽  
Vol 52 (5) ◽  
pp. 1356-1361
Author(s):  
S. Abdel Rahman ◽  
M. Elsafty ◽  
A. Hattaba
Keyword(s):  
Circular Dichroism ◽  
Solid State ◽  
Ir Spectra ◽  
Chain Length ◽  
Room Temperature ◽  
Infrared Study ◽  
Feature Characteristic ◽  
C 50 ◽  
The Stability ◽  
Circular Dichroïsm

The conformation of elastin-like peptides Boc-Ala-Pro-Gly-Val-APEGM, Boc-Ala-Pro-Gly-Val-Gly-Val-APEGM, Boc-Ala-Pro-Gly-Val-Ala-Pro-Gly-Val-Gly-Val-APEGM, Boc-Ala-Pro-Gly-Val-Gly-Val-Ala-Pro-Gly-Val-Gly-Val-APEGM were examined in solution using circular dichroism at 30 °C, 50 °C, and 70 °C and in solid state by IR at room temperature. The studies show that the β-turn is a significant conformational feature for peptides under investigation in solution at 30 °C and 50 °C, but at 70 °C the tetra, hexa, and decapeptides show the CD feature characteristic of the β-structure while the dodecapeptide spectra show the presence of β-turn which indicates the stability of the β-turn at this chain length. The IR spectra show that in the solid state at room temperature all investigated peptides assume essentially a β-turn except the tetrapeptide which present evidence of antiparallel β-structure. The β-turn contribution in the IR spectra increases with the increase of the chain length of the peptide.

scholarly journals Preparation of Li3PS4–Li3PO4 Solid Electrolytes by Liquid-Phase Shaking for All-Solid-State Batteries

2021 ◽  
Vol 2 (1) ◽  
pp. 39-48
Author(s):  
Nguyen H. H. Phuc ◽  
Takaki Maeda ◽  
Tokoharu Yamamoto ◽  
Hiroyuki Muto ◽  
Atsunori Matsuda
Keyword(s):  
Solid Solution ◽  
Solid State ◽  
Liquid Phase ◽  
Room Temperature ◽  
Reaction Medium ◽  
Magic Angle Spinning ◽  
Resonance Spectroscopy ◽  
Synthesis Methods ◽  
Magic Angle ◽  
Angle Spinning

A solid solution of a 100Li3PS4·xLi3PO4 solid electrolyte was easily prepared by liquid-phase synthesis. Instead of the conventional solid-state synthesis methods, ethyl propionate was used as the reaction medium. The initial stage of the reaction among Li2S, P2S5 and Li3PO4 was proved by ultraviolet-visible spectroscopy. The powder X-ray diffraction (XRD) results showed that the solid solution was formed up to x = 6. At x = 20, XRD peaks of Li3PO4 were detected in the prepared sample after heat treatment at 170 °C. However, the samples obtained at room temperature showed no evidence of Li3PO4 remaining for x = 20. Solid phosphorus-31 magic angle spinning nuclear magnetic resonance spectroscopy results proved the formation of a POS33− unit in the sample with x = 6. Improvements of ionic conductivity at room temperature and activation energy were obtained with the formation of the solid solution. The sample with x = 6 exhibited a better stability against Li metal than that with x = 0. The all-solid-state half-cell employing the sample with x = 6 at the positive electrode exhibited a better charge–discharge capacity than that employing the sample with x = 0.

Structure and emission properties of barium calcium aluminates synthesized by room-temperature solid-state reaction approach

2021 ◽  
Vol 263 ◽  
pp. 124418
Author(s):  
Zhenghu Huang ◽  
Fengyi Wu ◽  
Qiang Zheng ◽  
Huiyu Xiong ◽  
Jian Fang ◽  
...  
Keyword(s):  
Solid State ◽  
Solid State Reaction ◽  
Room Temperature ◽  
Emission Properties ◽  
Calcium Aluminates

Free-standing electrochemically coated MoSx based 3D-printed nanocarbon electrode for solid-state supercapacitor application

Nanoscale ◽  
2021 ◽  
Author(s):  
Kalyan Ghosh ◽  
Martin Pumera
Keyword(s):  
Solid State ◽  
Transition Metal ◽  
Electrochemical Deposition ◽  
Room Temperature ◽  
Free Standing ◽  
Metal Chalcogenide ◽  
Supercapacitor Application ◽  
3D Printed

Room temperature electrochemical deposition of transition metal chalcogenide (MoSx) on 3D-printed nanocarbon fibers based electrodes for custom shaped solid-state supercapacitor.

Sign in / Sign up

Export Citation Format

Share Document