Reservoir Characterization of TAGI Sands from Seismic Data, Bazma and Jorf Permits, Central Tunisia

2003 ◽  
Author(s):  
D. Nelson
Keyword(s):  
Seismic Data ◽  
Reservoir Characterization ◽  
Central Tunisia

Reservoir characterization of the Grane field with multi‐component seismic data

2003 ◽  
Author(s):  
Alexis Carrillat ◽  
Michael Nickel ◽  
Trygve Randen ◽  
Toril Saeter Valen ◽  
Lars Sonneland ◽  
...  
Keyword(s):  
Seismic Data ◽  
Reservoir Characterization

Seismic reservoir characterization of the Bone Spring and Wolfcamp Formations in the Delaware Basin: Challenges and uncertainty in characterization using rock physics — A case study: Part 2

2020 ◽  
Vol 8 (4) ◽  
pp. T1057-T1069
Author(s):  
Ritesh Kumar Sharma ◽  
Satinder Chopra ◽  
Larry Lines
Keyword(s):  
Seismic Data ◽  
Reservoir Characterization ◽  
Rock Physics ◽  
Well Log ◽  
Data Set ◽  
Frequency Model ◽  
Log Data ◽  
Delaware Basin ◽  
Seismic Reservoir

The discrimination of fluid content and lithology in a reservoir is important because it has a bearing on reservoir development and its management. Among other things, rock-physics analysis is usually carried out to distinguish between the lithology and fluid components of a reservoir by way of estimating the volume of clay, water saturation, and porosity using seismic data. Although these rock-physics parameters are easy to compute for conventional plays, there are many uncertainties in their estimation for unconventional plays, especially where multiple zones need to be characterized simultaneously. We have evaluated such uncertainties with reference to a data set from the Delaware Basin where the Bone Spring, Wolfcamp, Barnett, and Mississippian Formations are the prospective zones. Attempts at seismic reservoir characterization of these formations have been developed in Part 1 of this paper, where the geologic background of the area of study, the preconditioning of prestack seismic data, well-log correlation, accounting for the temporal and lateral variation in the seismic wavelets, and building of robust low-frequency model for prestack simultaneous impedance inversion were determined. We determine the challenges and the uncertainty in the characterization of the Bone Spring, Wolfcamp, Barnett, and Mississippian sections and explain how we overcame those. In the light of these uncertainties, we decide that any deterministic approach for characterization of the target formations of interest may not be appropriate and we build a case for adopting a robust statistical approach. Making use of neutron porosity and density porosity well-log data in the formations of interest, we determine how the type of shale, volume of shale, effective porosity, and lithoclassification can be carried out. Using the available log data, multimineral analysis was also carried out using a nonlinear optimization approach, which lent support to our facies classification. We then extend this exercise to derived seismic attributes for determination of the lithofacies volumes and their probabilities, together with their correlations with the facies information derived from mud log data.

Geophysical Aspects of Reservoir Characterization of Tight Gas Play in the Dnieper-Donets Basin

2021 ◽  
Author(s):  
Rustem Valiakhmetov ◽  
Andrea Murineddu ◽  
Murat Zhiyenkulov ◽  
Viktor Maliar ◽  
Viktor Bugriy ◽  
...  
Keyword(s):  
Data Processing ◽  
Seismic Data ◽  
Reservoir Characterization ◽  
Seismic Attributes ◽  
Static Model ◽  
Donets Basin ◽  
Tight Gas ◽  
Seismic Data Processing ◽  
Exploration Well

Abstract The objective of this work is to describe a comprehensive approach integrating seismic data processing and sets of wireline logs for reservoir characterization of one of the tight gas plays of the Dnieper-Donets basin. This paper intends to discuss a case study from seismic data processing, integrating seismic attributes with formation properties from logs in a geocellular model for sweet spot selection and risk analysis. The workflow during the project included the following steps.Seismic data 3D processing, including 5D interpolation and PSTM migration.Interpretation of limited log data from 4 exploration and appraisal wells.Seismic interpretation and inversion.Building a static model of the field.Recommendations for drilling locations.Evaluation of the drilled well to verify input parameters of the initial model. The static model integrated all available subsurface data and used inverted seismic attributes calibrated to the available logs to constrain the property modelling. Then various deterministic and stochastic approaches were used for facies modeling and estimation of gas-in-place volume. Integrating all the available data provides insights for better understating the reservoir distribution and provided recommendations for drilling locations. Based on the combination of the geocellular model, seismic attributes and seismic inversion results, the operator drilled an exploration well. The modern set of petrophysical logs acquired in the recently drilled well enforced prior knowledge and delivered a robust picture of the tight gas reservoir. The results from the drilled well matched predicted formation properties very closely, which added confidence in the technical approach applied in this study and similar studies that followed later. It is the fork in the road moment for the Dnieper-Donetsk basin with huge tight gas potential in the region that inspires for exploration of other prospects and plays. A synergy of analytical methods with a combination of seismic processing, geomodeling, and reservoir characterization approaches allowed accurate selection of the drilling targets with minimum risk of "dry hole" that has been vindicated by successful drilling outcome in a new exploration well.

scholarly journals An integrated petrophysical-based wedge modeling and thin bed AVO analysis for improved reservoir characterization of Zhujiang Formation, Huizhou sub-basin, China: A case study

2020 ◽  
Vol 12 (1) ◽  
pp. 256-274
Author(s):  
Wasif Saeed ◽  
Hongbing Zhang ◽  
Qiang Guo ◽  
Aamir Ali ◽  
Tahir Azeem ◽  
...  
Keyword(s):  
Seismic Data ◽  
Reservoir Characterization ◽  
Dominant Frequency ◽  
Well Logs ◽  
Amplitude Versus Offset ◽  
Avo Attributes ◽  
Thin Reservoir ◽  
Amplitude Versus

AbstractThe main reservoir in Huizhou sub-basin is Zhujiang Formation of early Miocene age. The petrophysical analysis shows that the Zhujiang Formation contains thin carbonate intervals, which have good hydrocarbon potential. However, the accurate interpretation of thin carbonate intervals is always challenging as conventional seismic interpretation techniques do not provide much success in such cases. In this study, well logs, three-layer forward amplitude versus offset (AVO) model and the wedge model are integrated to analyze the effect of tuning thickness on AVO responses. It is observed that zones having a thickness greater than or equal to 15 m can be delineated with seismic data having a dominant frequency of more than 45 Hz. The results are also successfully verified by analyzing AVO attributes, i.e., intercept and gradient. The study will be helpful to enhance the characterization of thin reservoir intervals and minimize the risk of exploration in the Huizhou sub-basin, China.

Integrated reservoir characterization of a Utica Shale field

2018 ◽  
Vol 37 (9) ◽  
pp. 656-661
Author(s):  
Jinming Zhu
Keyword(s):  
Seismic Data ◽  
Reservoir Characterization ◽  
Water Saturation ◽  
Clay Content ◽  
Seismic Inversion ◽  
Data Set ◽  
Utica Shale ◽  
Multidisciplinary Study ◽  
3D Seismic Data

We performed an integrated multidisciplinary study for reservoir characterization of a Utica Shale field in eastern Ohio covered by a multiclient 3D seismic data set acquired in 2015. Elastic seismic inversion was performed in-house for effective reservoir characterization of the Utica Shale, which covers the interval from the top of Upper Utica (UUTIC) to the top of Trenton Limestone. Accurate, high-fidelity inversion results were obtained, including acoustic impedance, shear impedance, density, and VP/VS. These consistent inversion results allow for the reliable calculation of geomechanical and petrophysical properties of the reservoir. The inverted density clearly divides the Point Pleasant (PPLS) interval as low density from the overlying UUTIC Shale interval. Both Poisson's ratio (PR) and brittleness unmistakably separate the underlying PPLS from the overlying Utica interval. The PPLS Formation is easier to hydraulically fracture due to its much lower PR. Sequence S4 is the best due to its higher Young's modulus to sustain the open fractures. The calculated petrophysical volumes indisputably delineate the traditional Utica Shale into two distinctive sections. The upper section, the UUTIC, can be described as having 1%–2% total organic carbon (TOC), 3.5%–4.8% porosity, 10%–24% water saturation, and 40%–58% clay content. The lower section, PPLS, can be described as having 3%–4.5% TOC, 5%–9% porosity, 2%–10% water saturation, and about 15%–35% clay content. Both sections exhibit spatial variation of the properties. Nevertheless, the underlying PPLS is obviously a significantly better reservoir and operationally easier to produce.

Seismic reservoir characterization of Utica-Point Pleasant shale with efforts at fracability evaluation — Part 2: A case study

2018 ◽  
Vol 6 (2) ◽  
pp. T325-T336 ◽  
Author(s):  
Ritesh Kumar Sharma ◽  
Satinder Chopra ◽  
James Keay ◽  
Hossein Nemati ◽  
Larry Lines
Keyword(s):  
Seismic Data ◽  
Reservoir Characterization ◽  
Low Frequency ◽  
Rock Physics ◽  
Well Log ◽  
X Ray Diffraction ◽  
Impedance Inversion ◽  
Seismic Reservoir ◽  
Petrophysical Modeling

The Utica Formation in eastern Ohio possesses all the prerequisites for being a successful unconventional play. Attempts at seismic reservoir characterization of the Utica Formation have been discussed in part 1, in which, after providing the geologic background of the area of study, the preconditioning of prestack seismic data, well-log correlation, and building of robust low-frequency models for prestack simultaneous impedance inversion were explained. All these efforts were aimed at identification of sweet spots in the Utica Formation in terms of organic richness as well as brittleness. We elaborate on some aspects of that exercise, such as the challenges we faced in the determination of the total organic carbon (TOC) volume and computation of brittleness indices based on mineralogical and geomechanical considerations. The prediction of TOC in the Utica play using a methodology, in which limited seismic as well as well-log data are available, is demonstrated first. Thereafter, knowing the nonexistence of the universally accepted indicator of brittleness, mechanical along with mineralogical attempts to extract the brittleness information for the Utica play are discussed. Although an attempt is made to determine brittleness from mechanical rock-physics parameters (Young’s modulus and Poisson’s ratio) derived from seismic data, the available X-ray diffraction data and regional petrophysical modeling make it possible to determine the brittleness index based on mineralogical data and thereafter be derived from seismic data.

Reservoir Characterization of the Grane Field with Multi-Component Seismic Data

2003 ◽  
Author(s):  
A. Carrillat ◽  
M. Nickel ◽  
T. Randen ◽  
L. Sonneland ◽  
T.S. Valen ◽  
...  
Keyword(s):  
Seismic Data ◽  
Reservoir Characterization
Sign in / Sign up

Export Citation Format

Share Document