AVO Analysis Constrained by Burial History

Author(s):  
P. Avseth ◽  
I. Lehocki ◽  
P. Abrahamson
Keyword(s):  
Author(s):  
A., C. Prasetyo

Overpressure existence represents a geological hazard; therefore, an accurate pore pressure prediction is critical for well planning and drilling procedures, etc. Overpressure is a geological phenomenon usually generated by two mechanisms, loading (disequilibrium compaction) and unloading mechanisms (diagenesis and hydrocarbon generation) and they are all geological processes. This research was conducted based on analytical and descriptive methods integrated with well data including wireline log, laboratory test and well test data. This research was conducted based on quantitative estimate of pore pressures using the Eaton Method. The stages are determining shale intervals with GR logs, calculating vertical stress/overburden stress values, determining normal compaction trends, making cross plots of sonic logs against density logs, calculating geothermal gradients, analyzing hydrocarbon maturity, and calculating sedimentation rates with burial history. The research conducted an analysis method on the distribution of clay mineral composition to determine depositional environment and its relationship to overpressure. The wells include GAP-01, GAP-02, GAP-03, and GAP-04 which has an overpressure zone range at depth 8501-10988 ft. The pressure value within the 4 wells has a range between 4358-7451 Psi. Overpressure mechanism in the GAP field is caused by non-loading mechanism (clay mineral diagenesis and hydrocarbon maturation). Overpressure distribution is controlled by its stratigraphy. Therefore, it is possible overpressure is spread quite broadly, especially in the low morphology of the “GAP” Field. This relates to the delta depositional environment with thick shale. Based on clay minerals distribution, the northern part (GAP 02 & 03) has more clay mineral content compared to the south and this can be interpreted increasingly towards sea (low energy regime) and facies turned into pro-delta. Overpressure might be found shallower in the north than the south due to higher clay mineral content present to the north.


2005 ◽  
Author(s):  
Laura N.R. Roberts ◽  
Debra K. Higley ◽  
Mitchell E. Henry

2019 ◽  
Vol 56 (4) ◽  
pp. 365-396
Author(s):  
Debra Higley ◽  
Catherine Enomoto

Nine 1D burial history models were built across the Appalachian basin to reconstruct the burial, erosional, and thermal maturation histories of contained petroleum source rocks. Models were calibrated to measured downhole temperatures, and to vitrinite reflectance (% Ro) data for Devonian through Pennsylvanian source rocks. The highest levels of thermal maturity in petroleum source rocks are within and proximal to the Rome trough in the deep basin, which are also within the confluence of increased structural complexity and associated faulting, overpressured Devonian shales, and thick intervals of salt in the underlying Silurian Salina Group. Models incorporate minor erosion from 260 to 140 million years ago (Ma) that allows for extended burial and heating of underlying strata. Two modeled times of increased erosion, from 140 to 90 Ma and 23 to 5.3 Ma, are followed by lesser erosion from 5.3 Ma to Present. Absent strata are mainly Permian shales and sandstone; thickness of these removed layers increased from about 6200 ft (1890 m) west of the Rome trough to as much as 9650 ft (2940 m) within the trough. The onset of oil generation based on 0.6% Ro ranges from 387 to 306 Ma for the Utica Shale, and 359 to 282 Ma for Middle Devonian to basal Mississippian shales. The ~1.2% Ro onset of wet gas generation ranges from 360 to 281 Ma in the Utica Shale, and 298 to 150 Ma for Devonian to lowermost Mississippian shales.


Energies ◽  
2020 ◽  
Vol 13 (24) ◽  
pp. 6537
Author(s):  
Barbara Uliasz-Misiak ◽  
Jacek Misiak ◽  
Joanna Lewandowska-Śmierzchalska ◽  
Rafał Matuła

In coal seams, depending on the composition of coal macerals, rank of coal, burial history, and migration of thermogenic and/or biogenic gas. In one ton of coal 1 to 25 m3 of methane can be accumulated. Accumulation of this gas is included in unconventional deposits. Exploitation of methane from coal seams is carried out with wells from mining excavations (during mining operations), wells drilled to abandoned coal mines, and wells from the surface to unexploited coal seams. Due to the low permeability of the coal matrix, hydraulic fracturing is also commonly used. Operations related to exploration (drilling works) and exploitation of methane from coal seams were analyzed. The preliminary analysis of the environmental threats associated with the exploration and exploitation of coalbed methane has made it possible to identify types of risks that affect the environment in various ways. The environmental risks were estimated as the product of the probability weightings of adverse events occurring and weightings of consequences. Drilling operations and coalbed methane (CBM) exploitation leads to environmental risks, for which the risk category falls within the controlled and accepted range.


1999 ◽  
Vol 18 (6) ◽  
pp. 713-715
Author(s):  
Consuelo García Mojonero ◽  
Ángela Echánove Hornos ◽  
Agustín Arrieta Murillo ◽  
Álvaro Lavín Hueros
Keyword(s):  

Sign in / Sign up

Export Citation Format

Share Document