Clash of Cultures

2020 ◽  
pp. 86-114
Author(s):  
Jennifer Loy ◽  
Samuel Canning
Keyword(s):  
Additive Manufacturing ◽  
Software Development ◽  
Industrial Design ◽  
Scientific Research ◽  
Fashion Design ◽  
Research Facility ◽  
Research Teams ◽  
Additive Manufacturing Technology ◽  
Clash Of Cultures ◽  
Fashion Designers

In 2012, a Belgian company called Materialise hosted a fashion show featuring designs from a worldwide millinery competition. The featured pieces were paraded down a catwalk by professional models, and an overall winner chosen. What made this fashion show unusual was that the attendees were predominantly clinical and industrial engineers, and the host was a specialist engineering and software development company that emerged in 1990 from a research facility based at Leuven University. Engineers and product designers rather than fashion designers created the millinery and the works were all realized through additive manufacturing technology. This chapter provides an example of how fashion design has become a creative stimulus for the development of the technology. It illustrates how disruptive creativity has the potential to advance scientific research, with the two worlds of engineering and fashion coming together through a collaboration with industrial design. The chapter highlights the challenges and possible implications for preparing trans-disciplinary research teams.

Clash of Cultures

2016 ◽  
pp. 25-53
Author(s):  
Jennifer Loy ◽  
Samuel Canning
Keyword(s):  
Additive Manufacturing ◽  
Software Development ◽  
Industrial Design ◽  
Scientific Research ◽  
Fashion Design ◽  
Research Facility ◽  
Research Teams ◽  
Additive Manufacturing Technology ◽  
Clash Of Cultures ◽  
Fashion Designers

In 2012, a Belgian company called Materialise hosted a fashion show featuring designs from a worldwide millinery competition. The featured pieces were paraded down a catwalk by professional models, and an overall winner chosen. What made this fashion show unusual was that the attendees were predominantly clinical and industrial engineers, and the host was a specialist engineering and software development company that emerged in 1990 from a research facility based at Leuven University. Engineers and product designers rather than fashion designers created the millinery and the works were all realized through additive manufacturing technology. This chapter provides an example of how fashion design has become a creative stimulus for the development of the technology. It illustrates how disruptive creativity has the potential to advance scientific research, with the two worlds of engineering and fashion coming together through a collaboration with industrial design. The chapter highlights the challenges and possible implications for preparing trans-disciplinary research teams.

Clash of Cultures

2020 ◽  
pp. 926-954
Author(s):  
Jennifer Loy ◽  
Samuel Canning
Keyword(s):  
Additive Manufacturing ◽  
Software Development ◽  
Industrial Design ◽  
Scientific Research ◽  
Fashion Design ◽  
Research Facility ◽  
Research Teams ◽  
Additive Manufacturing Technology ◽  
Clash Of Cultures ◽  
Fashion Designers

In 2012, a Belgian company called Materialise hosted a fashion show featuring designs from a worldwide millinery competition. The featured pieces were paraded down a catwalk by professional models, and an overall winner chosen. What made this fashion show unusual was that the attendees were predominantly clinical and industrial engineers, and the host was a specialist engineering and software development company that emerged in 1990 from a research facility based at Leuven University. Engineers and product designers rather than fashion designers created the millinery and the works were all realized through additive manufacturing technology. This chapter provides an example of how fashion design has become a creative stimulus for the development of the technology. It illustrates how disruptive creativity has the potential to advance scientific research, with the two worlds of engineering and fashion coming together through a collaboration with industrial design. The chapter highlights the challenges and possible implications for preparing trans-disciplinary research teams.

The Trends and Challenges of 3D Printing

2019 ◽  
pp. 415-423
Author(s):  
Edna Ho Chu Fang ◽  
Sameer Kumar
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Rapid Prototyping ◽  
Industrial Design ◽  
Consumer Products ◽  
Manufacturing Technology ◽  
3D Object ◽  
Additive Manufacturing Technology ◽  
Human Organs ◽  
Traditional Manufacturing

3D printing is a type of additive manufacturing technology where a 3D object is created by laying down subsequent layers of material at the mm scale. It is also known as rapid prototyping. 3D printing is now applied in various industries such as footwear, jewelry, architecture, engineering and construction, aerospace, dental and medical industries, education, consumer products, automotive, and industrial design. Some claim that 3D printing will put an end to traditional manufacturing, primarily since 3D printing imposes a tool-less process. Though 3D printing technology is used in weapon manufacturing, it is also being used to improve the lives of mankind. In the future, 3D printing will most probably be used to print human organs. The chapter discusses the trends and challenges faced by this exciting technology.

The Trends and Challenges of 3D Printing

2018 ◽  
pp. 4382-4389
Author(s):  
Edna Ho Chu Fang ◽  
Sameer Kumar
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Rapid Prototyping ◽  
Industrial Design ◽  
Consumer Products ◽  
Manufacturing Technology ◽  
3D Object ◽  
Additive Manufacturing Technology ◽  
Human Organs ◽  
Traditional Manufacturing

3D printing is a type of additive manufacturing technology where a 3D object is created by laying down subsequent layers of material at the mm scale. It is also known as rapid prototyping. 3D printing is now applied in various industries such as footwear, jewelry, architecture, engineering and construction, aerospace, dental and medical industries, education, consumer products, automotive and industrial design. Some claim that 3D printing will put an end to traditional manufacturing primarily since 3D printing imposes a tool-less process. Though 3D printing technology is used in weapon manufacturing, it is also being used to improve the lives of mankind. In the future, 3D printing will most probably be used to print human organs. The article discusses the trends and challenges faced by this exciting technology.

Dressmaking rediscovered: When design meets fashion in Helsinki

2021 ◽  
Author(s):  
Namkyu Chun
Keyword(s):  
Industrial Design ◽  
Fashion Design ◽  
Fashion Designers ◽  
Unique Condition

Fashion design as a combined term conveys a different connotation than separate words of fashion and design. This is due to the complexity of the fashion system that also involves certain social prejudices, such as gendered practice and being shallow. This has set a gap for considering fashion design as a serious topic to study in comparison to other design subfields such as architecture and industrial design. However, this article argues that by emphasizing the dressmaking aspect in designing fashion, prejudices can be overcome. Finland, especially its capital Helsinki, is an established place for design and an emerging place for fashion. The recent development of the place where the encounter of design and fashion took place provides a unique condition for exploring the contemporary dressmaking practice of Helsinki-based fashion designers. A number of aspects identified from the context are shared to demonstrate how fashion design can be revisited besides the image-making aspect.

scholarly journals Rapid fabrication of MOF-based mixed matrix membranes through digital light processing

2021 ◽  
Author(s):  
Alexey Pustovarenko ◽  
Beatriz Seoane ◽  
Edy Abou-Hamad ◽  
Helen E King ◽  
Bert Weckhuysen ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Processing Speed ◽  
Mixed Matrix Membranes ◽  
Scientific Interest ◽  
Mixed Matrix ◽  
Digital Light Processing ◽  
Additive Manufacturing Technology ◽  
Rapid Fabrication ◽  
Manufacturing Methods

3D printing, also known as additive manufacturing technology, has greatly expanded across multiple sectors of technology replacing classical manufacturing methods by combining processing speed and high precision. The scientific interest...

scholarly journals Evaluation of explosive parameters of fuel oil additive manufacturing technology

2021 ◽  
Vol 723 (5) ◽  
pp. 052017
Author(s):  
V Monashkov ◽  
I Russkova ◽  
Y Logvinova ◽  
N Rumyantseva ◽  
A Uljanov
Keyword(s):  
Additive Manufacturing ◽  
Manufacturing Technology ◽  
Fuel Oil ◽  
Additive Manufacturing Technology
Sign in / Sign up

Export Citation Format

Share Document