The Trends and Challenges of 3D Printing

Author(s):  
Edna Ho Chu Fang ◽  
Sameer Kumar

3D printing is a type of additive manufacturing technology where a 3D object is created by laying down subsequent layers of material at the mm scale. It is also known as rapid prototyping. 3D printing is now applied in various industries such as footwear, jewelry, architecture, engineering and construction, aerospace, dental and medical industries, education, consumer products, automotive, and industrial design. Some claim that 3D printing will put an end to traditional manufacturing, primarily since 3D printing imposes a tool-less process. Though 3D printing technology is used in weapon manufacturing, it is also being used to improve the lives of mankind. In the future, 3D printing will most probably be used to print human organs. The chapter discusses the trends and challenges faced by this exciting technology.

Author(s):  
Edna Ho Chu Fang ◽  
Sameer Kumar

3D printing is a type of additive manufacturing technology where a 3D object is created by laying down subsequent layers of material at the mm scale. It is also known as rapid prototyping. 3D printing is now applied in various industries such as footwear, jewelry, architecture, engineering and construction, aerospace, dental and medical industries, education, consumer products, automotive and industrial design. Some claim that 3D printing will put an end to traditional manufacturing primarily since 3D printing imposes a tool-less process. Though 3D printing technology is used in weapon manufacturing, it is also being used to improve the lives of mankind. In the future, 3D printing will most probably be used to print human organs. The article discusses the trends and challenges faced by this exciting technology.


Author(s):  
Laura Daniela Vallejo Melgarejo ◽  
Jose García ◽  
Ronald G. Reifenberger ◽  
Brittany Newell

This document condenses the results obtained when 3D printing lenses and their potential use as diffraction gratings using Digital Light Processing (DLP), as an additive manufacturing technique. This project investigated the feasibility of using DLP additive manufacturing for producing custom designed lenses and gratings. DLP was identified as the preferred manufacturing technology for gratings fabrication. Diffraction gratings take advantage of the anisotropy, inherent in additive manufacturing processes, to produce a collated pattern of multiple fringes on a substrate with completely smooth surfaces. The gratings are transmissive and were manufactured with slit separations of 10, 25 and 50 μm. More than 50 samples were printed at various build angles and mechanically treated for maximum optical transparency. The variables of the irradiance equation were obtained from photographs taken with an optical microscope. These values were used to estimate theoretical irradiance patterns of a diffraction grating and compared against the experimental 3-D printed grating. The resulting patterns were found to be remarkably similar in amplitude and distance between peaks when compared to theoretical values.


2019 ◽  
Vol 253 ◽  
pp. 03003
Author(s):  
Lei Yang ◽  
Xin Chen ◽  
Lei Zhang ◽  
Lei Li ◽  
Shuangzhu Kang ◽  
...  

High-efficiency formation of personalized stent by additive manufacturing (3D printing) has gained deal of attention and research in interventional and personalized medicine. In this article, the structural characteristics of vascular scaffolds and the application and innovation of additive manufacturing technology in the process of angioplasty are reviewed. In the future, with the continuous maturity of additive manufacturing technology, it is expected to be an important part of interventional precision medicine to manufacture personalized vascular stent.


2013 ◽  
Vol 464 ◽  
pp. 399-405 ◽  
Author(s):  
Ludmila Novakova-Marcincinova ◽  
Jozef Novak-Marcincin

Rapid Prototyping (RP) presents the automatic production of physical parts using by additive manufacturing technology. The start techniques for Rapid Prototyping became available in the late 1980s and were used to produce models and prototype parts. Today they are used for a much wider range of applications and are even used to manufacture production-quality parts in relatively small numbers. Rapid Prototyping is widely used in the automotive, aerospace, medical, and consumer products industries. In paper is presented process of design product development, product production and testing of products produced by Fused Deposition Modelling rapid prototyping technology.


2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Elodie Paquet ◽  
Alain Bernard ◽  
Benoit Furet ◽  
Sébastien Garnier ◽  
Sébastien Le Loch

Purpose The purpose of this paper is to present a novel methodology to produce a large boat hull with a foam additive manufacturing (FAM) process. To respond to shipping market needs, this new process is being developed. FAM technology is a conventional three-dimensional (3D) printing process whereby layers are deposited onto a high-pressure head mounted on a six-axis robotic arm. Traditionally, molds and masters are made with computer numerical control (CNC) machining or finished by hand. Handcrafting the molds is obviously time-consuming and labor-intensive, but even CNC machining can be challenging for parts with complex geometries and tight deadlines. Design/methodology/approach The proposed FAM technology focuses on the masters and molds, that are directly produced by 3D printing. This paper describes an additive manufacturing technology through which the operator can create a large part and its tools using the capacities of this new FAM technology. Findings The study shows a comparison carried out between the traditional manufacturing process and the additive manufacturing process, which is illustrated through an industrial case of application in the manufacturing industry. This work details the application of FAM technology to fabricate a 2.5 m boat hull mold and the results show the time and cost savings of FAM in the fabrication of large molds. Originality/value Finally, the advantages and drawbacks of the FAM technology are then discussed and novel features such as monitoring system and control to improve the accuracy of partly printed are highlighted.


Author(s):  
Nastase-Dan Ciobota ◽  
Gheorghe Ion Gheorghe ◽  
Veronica Despa

Abstract Additive Manufacturing (AM) concerns all classes of materials – polymers, metals, ceramics and glasses as well. For this reason, AM is in the focus of material scientists from all branches. Leaders of the industry realize that the possibilities of 3D printing are endless, and that these possibilities need ways and means to be taken full advantage of. Today, aerospace engineers are using the fused deposition modeling (FDM) method for rapid prototyping, part manufacturing, and tooling. They are followed by leaders and engineers from industry (industrial machines, motor vehicles, consumer products, medical/dental) but also from academic institutions and government/military.


2014 ◽  
Vol 529 ◽  
pp. 697-700
Author(s):  
Wan Li Ma ◽  
Feng He Tao ◽  
Chang Zhi Jia ◽  
Jian Chun Yang

3D printing technology is one additive manufacturing technology based on the principle of material accumulation. The domestic and foreign research status is specially introduced. The main principles and features of 3D printing technology are summarized. The applications in the civilian aspect is analyzed


2021 ◽  
Vol 13 (16) ◽  
pp. 8923
Author(s):  
Stelladriana Volpe ◽  
Valentino Sangiorgio ◽  
Andrea Petrella ◽  
Armando Coppola ◽  
Michele Notarnicola ◽  
...  

The Fourth Industrial Revolution represents the beginning of a profound change for the building sector. In the last decade, the perspective of shapes, materials, and construction techniques is evolving fast due to the additive manufacturing technology. On the other hand, even if the technology is growing fast and several 3D printed buildings are being developed worldwide, the potential of concrete 3D printing in building prefabrication remains unexplored. Consequently, the application of new digital fabrication technologies in the construction industry requires a redesign of the construction process and its components. This paper proposes a novel conception, design, and prototyping of a precast building envelope to be prefabricated with extrusion-based 3D concrete printing (3DCP). The new design and conception aim to fully exploit the potential of 3D printing for prefabricated components, especially in terms of dry assembly, speed of implementation, reusability, recyclability, modularity, versatility, adaptability, and sustainability. Beyond the novel conceptual design of precast elements, the research investigated the 3D printable cementitious material based on a magnesium potassium phosphate cement (MKPC), which was devised and tested to ensure good performances of the proposed component. Finally, a prototype has been realised in scale with additive manufacturing technology in order to verify the printability and to optimize the extruder path. This study leads us to believe that the combined use of prefabricated systems, construction automation, and innovative materials can decisively improve the construction industry’s sustainability in the future.


2018 ◽  
Vol 48 (1) ◽  
pp. 447-463 ◽  
Author(s):  
Bolesław Giemza ◽  
Marek Domański ◽  
Maciej Deliś ◽  
Dawid Kapica

Abstract Additive manufacturing technology is developing in many industries, including aviation, automotive and others. 3D printing offers new possibilities in the field of designing and manufacturing of machines and devices’ components. The paper presents the results of tribological investigations of components produced in FDM printing technology. The authors presented the evaluation of sliding properties of the model friction couple – block on ring type – of available thermoplastic polymers and polymers’ composites under dry friction conditions. The authors assessed the influence of material type and printed structure on resistance to motion of prepared samples.


Sign in / Sign up

Export Citation Format

Share Document