scholarly journals Rapid fabrication of MOF-based mixed matrix membranes through digital light processing

2021 ◽  
Author(s):  
Alexey Pustovarenko ◽  
Beatriz Seoane ◽  
Edy Abou-Hamad ◽  
Helen E King ◽  
Bert Weckhuysen ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Processing Speed ◽  
Mixed Matrix Membranes ◽  
Scientific Interest ◽  
Mixed Matrix ◽  
Digital Light Processing ◽  
Additive Manufacturing Technology ◽  
Rapid Fabrication ◽  
Manufacturing Methods

3D printing, also known as additive manufacturing technology, has greatly expanded across multiple sectors of technology replacing classical manufacturing methods by combining processing speed and high precision. The scientific interest...

Manufacture of Lenses and Diffraction Gratings Using DLP As an Additive Manufacturing Technology

2018 ◽  
Author(s):  
Laura Daniela Vallejo Melgarejo ◽  
Jose García ◽  
Ronald G. Reifenberger ◽  
Brittany Newell
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Diffraction Grating ◽  
Diffraction Gratings ◽  
Optical Microscope ◽  
Manufacturing Technology ◽  
Manufacturing Processes ◽  
Digital Light Processing ◽  
Additive Manufacturing Technology ◽  
Potential Use

This document condenses the results obtained when 3D printing lenses and their potential use as diffraction gratings using Digital Light Processing (DLP), as an additive manufacturing technique. This project investigated the feasibility of using DLP additive manufacturing for producing custom designed lenses and gratings. DLP was identified as the preferred manufacturing technology for gratings fabrication. Diffraction gratings take advantage of the anisotropy, inherent in additive manufacturing processes, to produce a collated pattern of multiple fringes on a substrate with completely smooth surfaces. The gratings are transmissive and were manufactured with slit separations of 10, 25 and 50 μm. More than 50 samples were printed at various build angles and mechanically treated for maximum optical transparency. The variables of the irradiance equation were obtained from photographs taken with an optical microscope. These values were used to estimate theoretical irradiance patterns of a diffraction grating and compared against the experimental 3-D printed grating. The resulting patterns were found to be remarkably similar in amplitude and distance between peaks when compared to theoretical values.

scholarly journals Additive Manufacturing in Vascular Stent Fabrication

2019 ◽  
Vol 253 ◽  
pp. 03003
Author(s):  
Lei Yang ◽  
Xin Chen ◽  
Lei Zhang ◽  
Lei Li ◽  
Shuangzhu Kang ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Personalized Medicine ◽  
High Efficiency ◽  
Structural Characteristics ◽  
Manufacturing Technology ◽  
Vascular Stent ◽  
Additive Manufacturing Technology ◽  
Vascular Scaffolds ◽  
And Personalized Medicine

High-efficiency formation of personalized stent by additive manufacturing (3D printing) has gained deal of attention and research in interventional and personalized medicine. In this article, the structural characteristics of vascular scaffolds and the application and innovation of additive manufacturing technology in the process of angioplasty are reviewed. In the future, with the continuous maturity of additive manufacturing technology, it is expected to be an important part of interventional precision medicine to manufacture personalized vascular stent.

scholarly journals DLP 3D Printing Meets Lignocellulosic Biopolymers: Carboxymethyl Cellulose Inks for 3D Biocompatible Hydrogels

Polymers ◽  
2020 ◽  
Vol 12 (8) ◽  
pp. 1655 ◽  
Author(s):  
Giuseppe Melilli ◽  
Irene Carmagnola ◽  
Chiara Tonda-Turo ◽  
Fabrizio Pirri ◽  
Gianluca Ciardelli ◽  
...  
Keyword(s):  
Mechanical Properties ◽  
Additive Manufacturing ◽  
3D Printing ◽  
Carboxymethyl Cellulose ◽  
Biomedical Applications ◽  
Digital Light Processing ◽  
Chemically Modified ◽  
Significant Step ◽  
3D Printed ◽  
Biomedical Field

The development of new bio-based inks is a stringent request for the expansion of additive manufacturing towards the development of 3D-printed biocompatible hydrogels. Herein, methacrylated carboxymethyl cellulose (M-CMC) is investigated as a bio-based photocurable ink for digital light processing (DLP) 3D printing. CMC is chemically modified using methacrylic anhydride. Successful methacrylation is confirmed by 1H NMR and FTIR spectroscopy. Aqueous formulations based on M-CMC/lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) photoinitiator and M-CMC/Dulbecco’s Modified Eagle Medium (DMEM)/LAP show high photoreactivity upon UV irradiation as confirmed by photorheology and FTIR. The same formulations can be easily 3D-printed through a DLP apparatus to produce 3D shaped hydrogels with excellent swelling ability and mechanical properties. Envisaging the application of the hydrogels in the biomedical field, cytotoxicity is also evaluated. The light-induced printing of cellulose-based hydrogels represents a significant step forward in the production of new DLP inks suitable for biomedical applications.

scholarly journals 3D printed MOF-based mixed matrix thin-film composite membranes

RSC Advances ◽  
2021 ◽  
Vol 11 (41) ◽  
pp. 25658-25663
Author(s):  
Sameh K. Elsaidi ◽  
Mayur Ostwal ◽  
Lingxiang Zhu ◽  
Ali Sekizkardes ◽  
Mona H. Mohamed ◽  
...  
Keyword(s):  
Thin Film ◽  
3D Printing ◽  
Composite Membranes ◽  
Mixed Matrix Membranes ◽  
Mixed Matrix ◽  
Film Composite ◽  
Thin Film Composite ◽  
3D Printed ◽  
Matrix Membranes

An electrospray 3D printing approach for fabricating thin-film composite mixed-matrix membranes (TFC MMM) with a thickness of 2–3 μm.

scholarly journals Polymer-Derived Biosilicate®-like Glass-Ceramics: Engineering of Formulations and Additive Manufacturing of Three-Dimensional Scaffolds

Materials ◽  
2021 ◽  
Vol 14 (18) ◽  
pp. 5170
Author(s):  
Fulden Dogrul ◽  
Paulina Ożóg ◽  
Martin Michálek ◽  
Hamada Elsayed ◽  
Dušan Galusek ◽  
...  
Keyword(s):  
Tissue Engineering ◽  
Additive Manufacturing ◽  
Room Temperature ◽  
Three Dimensional ◽  
Glass Ceramics ◽  
Gas Release ◽  
Carbon Phase ◽  
Digital Light Processing ◽  
Direct Ink Writing ◽  
Additive Manufacturing Technology

Silicone resins, filled with phosphates and other oxide fillers, yield upon firing in air at 1100 °C, a product resembling Biosilicate® glass-ceramics, one of the most promising systems for tissue engineering applications. The process requires no preliminary synthesis of parent glass, and the polymer route enables the application of direct ink writing (DIW) of silicone-based mixtures, for the manufacturing of reticulated scaffolds at room temperature. The thermal treatment is later applied for the conversion into ceramic scaffolds. The present paper further elucidates the flexibility of the approach. Changes in the reference silicone and firing atmosphere (from air to nitrogen) were studied to obtain functional composite biomaterials featuring a carbon phase embedded in a Biosilicate®-like matrix. The microstructure was further modified either through a controlled gas release at a low temperature, or by the revision of the adopted additive manufacturing technology (from DIW to digital light processing).

scholarly journals 3D printers in dentistry: a review of additive manufacturing techniques and materials

2021 ◽  
Author(s):  
Leonardo Portilha Gomes da Costa ◽  
Stephanie Isabel Díaz Zamalloa ◽  
Fernando Amorim Mendonça Alves ◽  
Renan Spigolon ◽  
Leandro Yukio Mano ◽  
...  
Keyword(s):  
Additive Manufacturing ◽  
3D Printing ◽  
Fused Deposition Modeling ◽  
Dental Materials ◽  
Clinical Results ◽  
Digital Light Processing ◽  
Fused Deposition ◽  
3D Printers ◽  
Manufacturing Techniques ◽  
Printed Materials

3D printers manufacture objects used in various dental specialties. Objective: This literature review aims to explore different techniques of current 3D printers and their applications in printed materials for dental purposes. Methods: The online PubMed databases were searched aiming to find applications of different 3D printers in the dental area. The keywords searched were 3D printer, 3D printing, additive manufacturing, rapid prototyping, 3D prototyping, dental materials and dentistry. Results: From the search results, we describe Stereolithography (SLA), Digital Light Processing (DLP), Material Jetting (MJ), Fused Deposition Modeling (FDM), Binder Jetting (BJ) and Dust-based printing techniques. Conclusion: 3D printing enables different additive manufacturing techniques to be used in dentistry, providing better workflows and more satisfying clinical results.

scholarly journals Rapid Fabrication by Digital Light Processing 3D Printing of a SlipChip with Movable Ports for Local Delivery to Ex Vivo Organ Cultures

Micromachines ◽  
2021 ◽  
Vol 12 (8) ◽  
pp. 993
Author(s):  
Megan A Catterton ◽  
Alexander G Ball ◽  
Rebecca R Pompano
Keyword(s):  
3D Printing ◽  
Ex Vivo ◽  
Local Delivery ◽  
Tissue Slices ◽  
Digital Light Processing ◽  
Rapid Fabrication ◽  
Wide Range ◽  
Scale Levels ◽  
Range Of Functions

SlipChips are two-part microfluidic devices that can be reconfigured to change fluidic pathways for a wide range of functions, including tissue stimulation. Currently, fabrication of these devices at the prototype stage requires a skilled microfluidic technician, e.g., for wet etching or alignment steps. In most cases, SlipChip functionality requires an optically clear, smooth, and flat surface that is fluorophilic and hydrophobic. Here, we tested digital light processing (DLP) 3D printing, which is rapid, reproducible, and easily shared, as a solution for fabrication of SlipChips at the prototype stage. As a case study, we sought to fabricate a SlipChip intended for local delivery to live tissue slices through a movable microfluidic port. The device was comprised of two multi-layer components: an enclosed channel with a delivery port and a culture chamber for tissue slices with a permeable support. Once the design was optimized, we demonstrated its function by locally delivering a chemical probe to slices of hydrogel and to living tissue with up to 120 µm spatial resolution. By establishing the design principles for 3D printing of SlipChip devices, this work will enhance the ability to rapidly prototype such devices at mid-scale levels of production.

scholarly journals The Influence of Different Slicer Software on 3d Printing Products Accuracy and Surface Roughness

2021 ◽  
Vol 12 (2) ◽  
pp. 371-380
Author(s):  
Sally Cahyati ◽  
◽  
Haris Risqy Aziz
Keyword(s):  
Surface Roughness ◽  
Additive Manufacturing ◽  
3D Printing ◽  
3D Model ◽  
High Surface ◽  
3D Printer ◽  
Layer By Layer ◽  
Additive Manufacturing Technology ◽  
Printing Machine

Rapid Prototyping (RP) is a manufacturing process that produces a 3D model CAD to be a real product rapidly by using additive manufacturing technology. In this case, the product will print layer by layer uses a 3D printer machine. The 3D printer requires slicer software to convert CAD data into data that a 3D printer machine can read. Research is done to analyze the effect of three kinds of slicer software on 3D printing objects on the accuracy and surface roughness of the product. The 3D model CAD is sliced using three different slicer software, namely Ideamaker, Repetier Host, and Cura. The slice model result from each slicer will be printed on a 3D printer machine with the same process parameters to be compared. Then the product's dimensional and surface roughness will be measured to determine the effect of each slicer on product quality. The best quality of the product reflected the most suitable slicer software for the 3D printing machine that used. The best results achieved by Cura slicer because it has resulted in small dimensional deviations (max 0,0308±0,0079) and stabile high surface roughness of the product (max 1,585+059).

scholarly journals Additive Manufacturing Technology in Orthodontic Devices Development

2020 ◽  
Vol 9 (3) ◽  
pp. 425-432
Keyword(s):  
Additive Manufacturing ◽  
Manufacturing Technology ◽  
Process Time ◽  
Digital Light Processing ◽  
Additive Manufacturing Technology ◽  
Long Time ◽  
Dental Models ◽  
Clear Plastic ◽  
Orthodontic Devices ◽  
Metal Wires

Traditional wires and brackets has been widely used as orthodontic devices for long time. The metal wires and brackets help to correct the position of teeth as well as fix the cavity. However, metal brace wires have quite a lot limitations. Patients wearing metal brace have many food restrictions and feel not comfortable. Brushing and flossing are required to remove the food debris frequently. Hence, clear plastic aligners have popped up recently. Since the metal brace fabrication process has associated with prolonged process time as a result of a long workflow process starting from brace mold presentation to the prosthesis execution. The growing of additive manufacturing technology make it possible to develop complex structures and shapes of dental brace. By combining 3D oral scanning, it is possible to shorten the lead time of orthodontic treatment process. This review, therefore, investigates the use of Digital Light Processing (DLP) Additive Manufacturing Technology for plastic dental brace development as a remedy to the problems associated with the traditional methods. The study reveals that it is feasible to fabricate these plastic braces utilising the DLP technology. DLP technology is affordable and arguably able to produce dental models with high levels of assurance and accuracy.

Sign in / Sign up

Export Citation Format

Share Document