Application of Lean Tool (Value Stream Mapping) in Minimisation of the Non-Value Added Waste (A Case Study of Tractor Industry)

2011 ◽  
Vol 110-116 ◽  
pp. 2062-2066 ◽  
Author(s):  
Paramdeep Singh ◽  
Harpuneet Singh
Keyword(s):  
Lean Manufacturing ◽  
Lead Time ◽  
Manufacturing System ◽  
Research Work ◽  
Value Added ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Work In Process ◽  
Before And After ◽  
Traditional Manufacturing

Lean manufacturing has been proved to be an effective management philosophy for improving businesses in a competitive market by eliminating non-value added waste and improving in process operations. Value stream mapping is an important tool used to identify the opportunities for various lean techniques. The present research mainly focuses on the description of a model that is developed to contrast the “before” and “after” scenarios in detail in order to obtain the various benefits such as reduced production lead time, lower work in process inventory [1] and proper utilisation of the workforce. The current manufacturing system has been compared with the proposed pull (Kanban) system which shows the benefits of the proposed lean manufacturing system over the existing traditional manufacturing system. The present research work has been carried out at typical tractor industry which shows 50.5% reduction in total lead time in the future state value mapping of the crank case and the number of operators involved in processing of crank case has also been reduced from 22 to 18.

scholarly journals Penerapan Lean Manufacturing Untuk Mengidentifikasi Dan Menurunkan Waste (Studi Kasus CV Tanara Textile)

2019 ◽  
Vol 5 (1) ◽  
pp. 1-7
Author(s):  
Catur Kusbiantoro ◽  
Ellysa Nursanti
Keyword(s):  
Lean Manufacturing ◽  
Lead Time ◽  
Value Added ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Work In Process ◽  
Cycle Efficiency

CV. Tanara Textile merupakan salah satu perusahaan tekstil yang termasuk dalam kelompok industri penyempurnaan kain berupa kain kaos. Pada proses produksi di perusahaan masih ditemukan beberapa waste. Penelitian ini bertujuan untuk mengidentifikasi dan menurunkan waste yang terjadi pada proses produksi maka digunakan pendekatan lean manufacturing. Metode Value Stream Mapping (VSM) digunakan untuk pemetaan aliran produksi dan aliran informasi terhadap suatu produk pada tingkat produksi total, melakukan wawancara untuk pembobotan penyebab 7 waste yang sering terjadi pada proses produksi, VALSAT untuk menganalisa pemborosan dari hasil pembobotan yang selanjutnya melakukan detailed mapping tools, serta analisis FMEA untuk mengetahui penyebab kegagalan prosesyang terjadi di lini produksi lalu menghitung nilai RPN tertinggi. Selanjutnya melakukan usulan perbaikan untuk menurunkan waste unnecessary inventory serta menganalisis perbaikan secara berkelanjutan dengan PDCA. Waste terbesar ada pada Unncessary Inventory sebesar 28,571% faktor penyebabnya adalah penumpukan bahan baku, work in process (WIP), sparepart yang tidak terpakai dan penimbunan pada finished goods Sebelum perbaikan proses produksi 16 hari 9 jam dimana Value Added 6 hari 4 jam dan Lead Time 10 hari 4 jam, setelah perbaikan proses produksi menjadi 14 hari 5 jam dimana Value Added 6 hari 4 jam dan Lead Time 8 hari 1 jam, dengan demikian dapat meningkatkan process cycle efficiency sebesar 17,19% dan menghemat lead time sebesar 2,546% dengan penurunan waste sebesar 8,31%

scholarly journals Analisis Penerapan Lean Production Process untuk Mengurangi Lead Time Process Perawatan Engine (Studi Kasus PT.GMF AEROASIA)

2016 ◽  
Vol 14 (2) ◽  
pp. 299 ◽  
Author(s):  
Wahyu Adrianto ◽  
Muhammad Kholil
Keyword(s):  
Lean Manufacturing ◽  
Lead Time ◽  
Value Added ◽  
Value Stream Mapping ◽  
Dominant Type ◽  
Value Stream ◽  
Root Cause ◽  
Gate System ◽  
People Development ◽  
Engine Maintenance

Engine maintenance strives to always improve its service excellence with tools such as gate system where the system is expected to realize the lead time for 60days. In the implementation of the gate system is still not able to meet the expected target. During maintenance or overhaul the engine is still encountered waste or waste that causes the target cannot be met. Lean Manufacturing is an approach that aims to minimize waste that occurs in the process flow.Understanding the conditions of the process described in Value Stream Mapping for further elaborate activities that have the value-added and non-value added.Through seven waste concept, then be weighted to determine the most dominant type of waste.From the data processing is obtained that through the Value Stream Mapping is known gate 1 and gate 3 is the point that there are many wastes. Weighting and ranking of seven existing waste in the process of the activity obtained results in the form of a waste critical sequence of seven existing waste. Highest weights on the type of waste waiting with a weight of 0.38. Results of Root Cause Analysis in mind that the root cause of waste waiting for that data is maintained, the lack of attention to people development, There are still bugs in the system and miscommunication.

scholarly journals Case Study: Maintenance Proposal of Press Parts Production for Minimize Waste by Lean Manufacturing – Value Stream Mapping (VSM)

INSIST ◽  
2017 ◽  
Vol 2 (1) ◽  
pp. 6
Author(s):  
Dessy Agustina Sari ◽  
Sukanta Sukanta
Keyword(s):  
Lean Manufacturing ◽  
Lead Time ◽  
Value Added ◽  
Value Stream Mapping ◽  
Problem Solution ◽  
Value Stream ◽  
A Value ◽  
Material Transportation ◽  
Schedule Activity

Abstract—Higher competition in businesslike field demanded each company acted as a value creator with progressive fixing performance. One of effort in increasing productivity was reducing waste. Enterprise T have seven type of extravagance were over production, transportation, inventory, over processing, motion waiting and defect. Minimize waste have bond with production time which could increase efficiency on using electricity and decreased lead time. Production process in this company showed non-value added time such as excessively material transportation in picking area and so the workers too much waited for the next schedule activity. This condition caused higher product lead time. Lean manufacturing idea necessary was implemented with using tool Value Stream Mapping – VSM. This strategy would resumed for the company maintenance and the result showed that lacking as much 26,45% of lead time could be a problem solution. Reducing lead time could be higher if the company have applied and played continue improvement.Keywords—lead time, lean manufacturing, value stream mapping.

Reduction of Process Lead Time Using Lean Tool - Value Stream Mapping (VSM)

2016 ◽  
Vol 860 ◽  
pp. 74-80 ◽  
Author(s):  
Antor Habib Chowdhury ◽  
Sakib Shahriar ◽  
Tanvir Hossen ◽  
Pallab Mahmud
Keyword(s):  
Lead Time ◽  
Research Work ◽  
Value Added ◽  
Point Of View ◽  
Value Stream Mapping ◽  
Safety Stock ◽  
Value Stream ◽  
Current State ◽  
Future State ◽  
Lean Tools

The research is designed to reduce production lead time using Value Stream Mapping (VSM). The purpose of this lean tool is to uncover the wastes in supply and production process by separating value-adding and non-value-adding steps first and then reduce non-value added steps. A map shows the current state of the operation is drawn first using the time and flow data. By this non-value added actions are recognized and the waste of time and resources between the steps are also identified. To reduce lead time and streamline the process the map is analyzed. The lead time can be reduced by taking some actions or applying some lean tools. Value adding time in the whole process increases and the process production lead time decreases after reducing the wastes. A future state map is made with new and improved processes. Future state map makes the reformed process more effective and more efficient. It comprises the developments through some value stream symbols used only for this mapping. Bata, a leading shoe company was selected for this research work. To draw the current state map, data was collected from the floor. The wastes identified then which were waiting, motion, inventory & transport. The lean tools that were suggested to apply for reducing these wastes were Kanban, Kaizen, Safety Stock and some manpower adjustment. Kanban is a method to achieve JIT, a system to control the logistical chain from a production point of view and also an inventory control system. Safety stock represents an inventory hedge against problems such as downtime, to protect the system against sudden fluctuations in customer orders or system failures. And Kaizen is the small and continuous improvement methods. The result of the research was quite remarkable as this decreases the lead time by around 8% and increases the capacity by 8.8%. It is feasible to use value stream map in the current situation.

scholarly journals Implementation of lean manufacturing to reduce waste in production line with value stream mapping approach and Kaizen in division sanding upright piano, case study in: PT. X

2018 ◽  
Vol 154 ◽  
pp. 01095 ◽  
Author(s):  
W. A. Santosa ◽  
M. Sugarindra
Keyword(s):  
Cycle Time ◽  
Lean Manufacturing ◽  
Lead Time ◽  
Value Stream Mapping ◽  
Production Lines ◽  
Production Scale ◽  
Value Stream ◽  
Work In Process ◽  
Quality Product

PT. XY produces musical instruments such as Upright Pianos and Grand Pianos. Due to a competitive competition, a good quality product is highly required as well as increasing the production scale. To achieve these objectives, company needs to reduce wastes occurred in its production lines, particularly in the division of sanding panel upright piano (UP) which produces type of PE B1 pianos. High cycle time and lead-time are caused by wastes in UP panel sanding division. Therefore, it is needed improvements to be applied here so that the production lines will be run more effectively and efficiently. This study aims to identify wastes using Value Stream Mapping (VSM) as a tool of lean manufacturing and to implement the improvements using Kaizen. It is found that the wastes are motion and waiting. Furthermore, the improvements (kaizen) are focused on reducing motion and waiting wastes. It is shown that cycle time decreased from 51.16 minutes to 41.90 minutes, work in process or inventory can be reduced to 24 pcs over 32 pcs, and the lead-time is 0.167 days of 0.222 days.

scholarly journals RANCANGAN USULAN PERBAIKAN UNTUK MEMINIMASI WAITING TIME PADA PROSES PRODUKSI RUBBER STEP ASPIRA BELAKANG DENGAN PENDEKATAN LEAN MANUFACTURING (STUDI KASUS: PT AGRONESIA DIVISI INDUSTRI TEKNIK KARET)

2016 ◽  
Vol 3 (02) ◽  
pp. 52
Author(s):  
Qolli Kusuma ◽  
Pratya Poeri Suryadhini ◽  
Mira Rahayu
Keyword(s):  
Waiting Time ◽  
Lean Manufacturing ◽  
Lead Time ◽  
Value Added ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Current State ◽  
Fishbone Diagram

PT Agronesia (Divisi Industri Teknik Karet) merupakan perusahaan manufaktur industri pengolahan yang memproduksi berbagai jenis produk karet teknik untuk keperluan industri, salah satunya adalah rubber step. Penelitian ini difokuskan pada rubber step Aspira Belakang yang memiliki gap ketidaktercapaian produksi tertinggi. Pada proses produksi rubber step Aspira Belakang ditemukan waktu menunggu yang mempengaruhi tingkat pencapaian target produksi. Tahap awal dalam penelitian ini adalah dengan mengumpulkan data primer yang diolah untuk menggambarkan value stream mapping (VSM) dan process activity mapping (PAM) current state sehingga diketahui lead time dari proses produksi rubber step Aspira Belakang sebesar 5915.07 detik dengan waktu aktivitas value added sebesar 1131.47 detik atau 19.13% dari lead time. Tahap berikutnya adalah mengidentifikasi penyebab akar masalah waiting time menggunakan peta pekerja-mesin, fishbone diagram dan 5 why. Tahap selanjutnya adalah melakukan analisis 5W1H untuk memaparkan detail masalah dan menentukan rancangan usulan perbaikan menggunakan metode lean manufacturing seperti Quick Changeover dan Display. Rancangan usulan perbaikan berupa perancangan alat potong, pembagian lot pengerjaan compound, pengadaan instruksi kerja, perancangan display, pembuatan batch/stock siap cetak, dan perancangan rak penyimpanan khusus sebagai upaya dalam meminimasi waiting time pada proses produksi rubber step Aspira Belakang. Berdasarkan rancangan usulan yang diberikan didapatkan lead time sebesar 3142.10 detik dengan waktu aktivitas value added sebesar 1131.47 detik atau 36.01% dari lead time.

scholarly journals Case Study: Maintenance Proposal of Press Parts Production for Minimize Waste by Lean Manufacturing – Value Stream Mapping (VSM)

INSIST ◽  
2017 ◽  
Vol 1 (1) ◽  
Author(s):  
Dessy Agustina Sari ◽  
Sukanta Sukanta
Keyword(s):  
Lean Manufacturing ◽  
Lead Time ◽  
Value Added ◽  
Value Stream Mapping ◽  
Problem Solution ◽  
Value Stream ◽  
A Value ◽  
Material Transportation ◽  
Schedule Activity

Abstract—Higher competition in businesslike field demanded each company acted as a value creator with progressive fixing performance. One of effort in increasing productivity was reducing waste. Enterprise T have seven type of extravagance were over production, transportation, inventory, over processing, motion waiting and defect. Minimize waste have bond with production time which could increase efficiency on using electricity and decreased lead time. Production process in this company showed non-value added time such as excessively material transportation in picking area and so the workers too much waited for the next schedule activity. This condition caused higher product lead time. Lean manufacturing idea necessary was implemented with using tool Value Stream Mapping – VSM. This strategy would resumed for the company maintenance and the result showed that lacking as much 26,45% of lead time could be a problem solution. Reducing lead time could be higher if the company have applied and played continue improvement.Keywords—lead time, lean manufacturing, value stream mapping.

Lean Manufacturing Implementation Through Value Stream Mapping: A Case Study

2014 ◽  
Vol 68 (3) ◽  
Author(s):  
Seyed Mojib Zahraee ◽  
Ahmad Hashemi ◽  
Ahmed Ali Abdi ◽  
Ataollah Shahpanah ◽  
Jafri Mohd Rohani
Keyword(s):  
Business Strategy ◽  
Production Line ◽  
Lean Manufacturing ◽  
Lead Time ◽  
Value Added ◽  
Secondary Data ◽  
Value Stream Mapping ◽  
Total Production ◽  
Value Stream ◽  
Value Stream Map

Lean Manufacturing (LM) is a business strategy that was developed in Japan. The main contribution of lean manufacturing is the identification and elimination of waste. Companies apply LM to sustain their competitiveness over their competitors by improving the manufacturing system’s productivity and quality enhancement of the product. The goal of this paper is to apply one of the most significant lean manufacturing techniques called Value Stream Mapping (VSM) to improve the production line of a company that produces several components for vehicle assembly line by decreasing the waste and non-value added activities.  First, the current value stream map of production line was developed using personal interviews, observations and secondary data of the company. Subsequently, the future value stream map was proposed based on the lean manufacturing principles to improve total production lead time and value added time. Based on the final result it can be concluded that VSM is a useful and applicable approach that can help managers conceptualize the different kind of wastes and defects. Final result showed that the production lead time and value added time improved up to nearly 80 % and 12 % respectively by eliminating the wastes based on lean principles and VMS method. 

Enhancement of Production Rate and Flexibility in an Assembly Line by Execution of Various Lean Techniques - A Case Study

2020 ◽  
Vol 51 ◽  
pp. 15-27
Author(s):  
D. Sobya ◽  
S. Jeyabalan
Keyword(s):  
Research Work ◽  
Value Added ◽  
Value Stream Mapping ◽  
Inventory Cost ◽  
Productivity Improvement ◽  
Value Stream ◽  
Work In Process ◽  
Assembly Area ◽  
Valve Assembly

This research work mainly focuses on the flexibility and productivity improvement through the execution of different lean techniques in the valve assembly of medium scale manufacturing unit. The different types of wastes percentage are determined to find out the waste which mainly affects the productivity. The major wastes of motion waste by about 30% and unwanted distance of 250 square foot were reduced by implementation of kaizen in the valve assembly area. Value stream mapping was used to identify the bottleneck process and by eliminating the bottleneck process results in the reduction of excess motion and non-value added activity by 45%. Work-in-process aging and work-in-process inventory cost was calculated and the production level was estimated by using 95th Percentile calculation. The total lead time was reduced about 54minutes with reduction of transportation time 2.7minutes after the implementation of lean techniques and the productivity of the valve assembly was also increased to about 6% after reducing the non-value added activities.

scholarly journals Penerapan Lean Manufacturing Untuk Meminimasi Waste Waiting Time Pada Proses Produksi Spring Guide XXX Di CV. Gradient

2017 ◽  
Vol 4 (02) ◽  
pp. 170
Author(s):  
Kuntari Puspa Sari ◽  
Agus Alex Yanuar ◽  
Meldi Rendra
Keyword(s):  
Injection Molding ◽  
Waiting Time ◽  
Preventive Maintenance ◽  
Lean Manufacturing ◽  
Lead Time ◽  
Value Added ◽  
Value Stream Mapping ◽  
Value Stream ◽  
Future State ◽  
Fishbone Diagram

CV. Gradient merupakan perusahaan manufaktur yang memproduksi plastik menggunakan mesin injection molding. Produk pada penelitian ini fokus pada produk spring guide dengan tipe XXX. Berdasarkan hasil observasi, wawancara dan kuesioner terdapat beberapa waste yang ditemukan dalam proses produksinya, salah satunya adalah waste yang menjadi fokus penelitian yaitu waste waiting time. Metode untuk meminimasi waste tersebut adalah dengan menggunakan konsep lean manufacturing. Penelitian dimulai dengan melakukan observasi dan wawancara untuk memperoleh data-data yang menunjang pemetaan proses produksi spring guide yang terjadi dengan menggunakan value stream mapping (VSM) dan process activity mapping (PAM) sehingga diketahui total waktu non-value added akibat waste waiting time adalah 7161.87 detik atau 57.8% dari lead time. Setelah itu, dilakukan analisis akar penyebab waste waiting time dengan menggunakan 5 whys dan fishbone diagram. Hasil dari analisis akar penyebab waste dapat digunakan untuk menentukan usulan rancangan yang akan dibuat berupa jadwal pemeliharaan mesin injection molding menggunakan preventive maintenance untuk mengurangi aktivitas non-value added. Pada kondisi yang akan datang, usulan rancangan dapat menghilangkan waktu menunggu dan waktu perbaikan yang menyebabkan waste waiting time. Berdasarkan future state total waktu non-value added dapat dikurangi menjadi 721.87 detik atau 12.12% dari lead time yang diperoleh dari penghilangan aktivitas menunggu dan aktivitas perbaikan.

Sign in / Sign up

Export Citation Format

Share Document