Analysis on Optimizing of Antenna Feeding Network

2011 ◽  
Vol 135-136 ◽  
pp. 1168-1170
Author(s):  
Ping Li ◽  
He Yan Li ◽  
Ling Ling Tang ◽  
Jun Li Li ◽  
Dong Yang Guo

A new feeding form is designed as a discontinued T-shaped in this paper. This paper also models a function with restrict conditions, a set of data is educed by optimizing nonlinear function, which is transformed through adding penalty function. At last, when the two-set coaxial impedance matching apparatus is fixed on the antenna, a comparison of simulator between the impedance and without it indicates that the matching results are satisfactory.

2012 ◽  
Author(s):  
Yongwoong Lee ◽  
Yiran Zhang ◽  
Ser-Huang Poon
Keyword(s):  

Materials ◽  
2019 ◽  
Vol 12 (18) ◽  
pp. 2921 ◽  
Author(s):  
Wei Huang ◽  
Yujiang Wang ◽  
Shicheng Wei ◽  
Bo Wang ◽  
Yi Liang ◽  
...  

Hollow magnetic structures have great potential to be used in the microwave absorbing field. Herein, Fe3O4 hollow spheres with different levels of hollowness were synthesized by the hydrothermal method under Ostwald ripening effect. In addition to their microstructures, the microwave absorption properties of such spheres were investigated. The results show that the grain size and hollowness of Fe3O4 hollow spheres both increase as the reaction time increases. With increasing hollowness, the attenuation ability of electromagnetic wave of Fe3O4 spheres increases first and then decreases, finally increases sharply after the spheres break down. Samples with strong attenuation ability can achieve good impedance matching, which it does preferentially as the absorber thickness increases. Fe3O4 hollow spheres show the best microwave absorption performance when the reaction time is 24 h. The minimum reflection loss (RL (min)) can reach −40 dB, while the thickness is only 3.2 mm.


Frequenz ◽  
2020 ◽  
Vol 74 (5-6) ◽  
pp. 191-199
Author(s):  
M. K. Verma ◽  
Binod K. Kanaujia ◽  
J. P. Saini ◽  
Padam S. Saini

AbstractA broadband circularly polarized slotted square patch antenna with horizontal meandered strip (HMS) is presented and studied. The HMS feeding technique provides the good impedance matching and broadside symmetrical radiation patterns. A set of cross asymmetrical slots are etched on the radiating patch to realize the circular polarization. An electrically small stub is added on the edge of the antenna for further improvement in performance. Measured 10-dB impedance bandwidth (IBW) and 3-dB axial ratio bandwidth (ARBW) of the proposed antenna are 32.31 % (3.14–4.35 GHz) and 20.91 % (3.34–4.12 GHz), respectively. The gain of the antenna is varied from 3.5 to 4.86dBi within 3-dB ARBW. Measured results matched well with the simulated results.


2019 ◽  
Vol 77 ◽  
pp. 115-123 ◽  
Author(s):  
Yang Yang ◽  
Lianghao Guo ◽  
Qing Zhou ◽  
Zhe Wu ◽  
Haibo Jiang ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document