Ambient Vibration Test on Earthquake Damaged R/C Building Structures

2012 ◽  
Vol 204-208 ◽  
pp. 2576-2579
Author(s):  
Jun Wu Dai ◽  
Yong Qiang Yang ◽  
Duo Zhi Wang

Reinforcement concrete (R/C) structure is constructed and developed very rapidly in recent 30 years with the economic increasing not only in metropolitan cities but also in wide rural areas of China. It’s famous for its’ easy construction and high load bearing capacity. But in recent large earthquakes, more and more different type of severe damages about R/C structures have been observed due to either unreasonable design or extra-high ground shaking intensity exceeding the design level mostly. In the field investigation for the 2010 Yushu Ms7.1 earthquake of China, six RC frame buildings, were investigated and tested by means of the ambient vibration test method. Both of the test results of the natural frequency for each building as well as its’ damage pattern were described and briefly analyzed in this paper. The investigation results provide reference data for nonlinear numerical analysis and retrofitting of RC frame building structures.

1983 ◽  
Vol 73 (6A) ◽  
pp. 1895-1902
Author(s):  
Gerard C. Pardoen

Abstract The ambient vibration test results conducted on the Imperial County Services Building prior to the 15 October 1979 Imperial Valley earthquake are summarized. These results are of significant interest because the Imperial County Services Building has been the source of many postearthquake investigations due to the fact that the 1979 earthquake represented the first time a building instrumented with strong motion recorders suffered and recorded the major structural failure.


2016 ◽  
Vol 47 ◽  
pp. 02012 ◽  
Author(s):  
Nurul Shazwin Idris ◽  
Koh Heng Boon ◽  
Ahmad Fahmy Kamarudin ◽  
Sherliza Zaini Sooria

2015 ◽  
Vol 773-774 ◽  
pp. 1002-1006
Author(s):  
Nurul Shazwin Idris ◽  
H.B. Koh ◽  
Ahmad Fahmy Kamarudin

Bridge is one of the important facilities use in daily life as bridge is built to span physical obstacles such as a body of water, valley or road for the purpose of providing passage over the obstacle. Various testing conducted on the bridge in order to know the dynamic characteristics of the bridges. One of popular testing use is ambient vibration test. Ambient vibration is a non-destructive test conducted using highly sensitive sensor. This testing is easy to be conduct with less labour, time and also cost. This paper aim to provide up to date literature review on ambient vibration test on bridge includes sources of ambient vibration, procedure of conducting the measurement and results from ambient vibration test. It is important to known the dynamic characteristics of the bridge especially to determine the dynamic response of the structure and also as dynamic information for seismic design.


Author(s):  
Alemdar Bayraktar ◽  
Bariş Sevim ◽  
Ahmet Can Altunişik ◽  
Temel Türker

2006 ◽  
Vol 43 (10) ◽  
pp. 997-1014 ◽  
Author(s):  
Mohammad Kazem Jafari ◽  
Mohammad Davoodi

The responses to forced vibrations, ambient vibrations, and large explosives were measured for Masjed Soleiman Dam, the highest embankment dam in Iran. Based on the results of these tests, the first 23 modal frequencies of the dam were measured and the related mode shapes for the first 16 modes were identified. A modal analysis of the dam body was also performed. The effects of reservoir water level variation, the rigidity and flexibility of the foundation and abutments and their depths and inertial properties, and the effect of material properties on the dynamic characteristics of the dam body were investigated, and the first eight modes of the dam body were identified. A comparison of the results of the numerical analysis with those from the tests indicates the best fit in lower modes occurs when the complete mass foundation is considered, whereas in higher modes the massless foundation model is a better fit.Key words: embankment dam, forced vibration test, ambient vibration test, explosion, modal properties.


Sign in / Sign up

Export Citation Format

Share Document