Research and Design of Novel Fractal Reader Antenna

2010 ◽  
Vol 43 ◽  
pp. 101-104
Author(s):  
Zu Jue Chen ◽  
Zhi Hui Zhong ◽  
Shu Yan
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Size Reduction ◽  
Maximum Gain ◽  
Microstrip Patch ◽  
Reader Antenna ◽  
Simulation Results ◽  
Research And Design ◽  
Minkowski Fractal

This paper researches how the various iterations affect the characteristics of Minkowski fractal microstrip patch antenna. A 2-itration Minkowski fractal reader antenna is designed. In order to increase antenna bandwidth, the structure of a novel modified antenna is presented to operate at 2.45GHz with the return loss of -35.15dB and bandwidth of 180MHz, the maximum gain of which is 7.83dB. Besides, with its size of 30mm ×30mm, this antenna area is decreased by 43.75% and the width is decreased by 25% compared to normal square patch antenna. The simulation results show that it has a good size-reduction feature that can well meet the requirement for handheld RFID reader under certain size and characteristics.

scholarly journals A t-shaped partial ground microstrip patch antenna based UHF sensor for partial discharge detection

2020 ◽  
Vol 20 (2) ◽  
pp. 704
Author(s):  
Nayli Adriana Azhar ◽  
Norazizah Mohd Aripin ◽  
Goh Chin Hock ◽  
Nayla Ferdous ◽  
Saidatul Hamidah
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Partial Discharge ◽  
Signal Strength ◽  
Substrate Material ◽  
Microstrip Patch Antenna ◽  
Microstrip Patch ◽  
Preventative Measures ◽  
Design Requirements ◽  
Simulation Results

Continuous partial discharge (PD) monitoring and early PD detection is important in making sure the necessary preventative measures can be taken accordingly. This paper proposed a T-shaped partial ground microstrip patch antenna that is able to detect PD signal within the UHF range. The antenna was designed and simulated using CST Microwave Studio. The antenna was then fabricated using FR4 substrate material and tested for reception test. The simulation results and the analysis from the fabricated antenna confirmed that the proposed antenna able to detect PD signal at UHF range (specifically at about 500 MHz) and fulfilled the design requirements in terms of the return loss, VSWR, bandwidth and gain. Reception test had confirmed that the proposed antenna was able to detect PD signals that are located at maximum distance, ranges from 37 cm to 70 cm (depending on the PD signal strength). The proposed antenna also had succesfully detected PD occurances at 300 MHz to 700 MHz. In conclusion, the proposed T-shaped partial ground microstrip patch antenna had been successfully designed and able to detect PD signal emitted in the UHF range.

Design of a MEMS Broadband Microstrip Patch Antenna Based on Minkowski Fractal Boundary

2012 ◽  
Vol 503 ◽  
pp. 227-231
Author(s):  
Chong Ying Lu ◽  
Li Xin Xu
Keyword(s):  
High Resistance ◽  
Silicon Substrate ◽  
Patch Antenna ◽  
Microstrip Patch Antenna ◽  
Fractal Boundary ◽  
Microstrip Patch ◽  
Relative Bandwidth ◽  
Mems Technology ◽  
Simulation Results ◽  
Minkowski Fractal

A MEMS broadband microstrip patch antenna based on Minkowski fractal boundary is designed. An air layer is designed in the antenna’s high resistance silicon substrate by MEMS technology and microstrip patch antenna with second degree iteration Minkowski fractal boundary is simulated. Then different p on the influence on the broadband performance of the antenna is discussed. The simulation results show that the broadband performance can be gained from microstrip patch antenna with MEMS air layer based on second iteration Minkowski fractal boundary. 23.34% relative bandwidth of the optimized antenna is achieved and the requirement of the broadband communication is satisfied.

scholarly journals Gain enhancement of microstrip patch antenna using artificial magnetic conductor

2019 ◽  
Vol 8 (1) ◽  
pp. 166-171
Author(s):  
Norfatihah Bahari ◽  
Mohd Faizal Jamlos ◽  
Muammar Mohamad Isa
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Size Reduction ◽  
Magnetic Conductor ◽  
Artificial Magnetic Conductor ◽  
Gain Enhancement ◽  
Microstrip Patch ◽  
Fifth Generation

The paper presents an artificial magnetic conductor (AMC) structure to enhance the gain of the double microstrip patch antenna. By placing this kind of metamaterial in between the two Rogers RT5880 substrates, the antenna achieved lots of improvement especially in terms of size miniaturization, bandwidth, return loss, gain and efficiency. The antenna is intended to operate at 16 GHz where the prospect fifth generation (5G) spectrum might be located. Integration of AMC structure into the proposed antenna helps to improve nearly 16.3% of gain and almost 23.6% of size reduction.

A Compact Microstrip Patch Antenna using DGS for 5G Applications

2021 ◽  
Vol 9 (4) ◽  
pp. 342-346
Keyword(s):  
Mobile Phones ◽  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Wireless Applications ◽  
Microstrip Patch ◽  
Online Mode ◽  
High Bandwidth ◽  
Simulation Results ◽  
The Web

Due to the current Covid-19 pandemic circumstance all classes in instructive foundations are going in online mode. Subsequently all understudies are utilizing Mobile phones for going to classes and educators are utilizing cell phones for taking on the web classes. For the above use we need a fast 5G organization with high Bandwidth. In this paper a reduced 5G Microstrip patch antenna with DGS structure has been proposed for the better insight of 5G Wireless applications. DGS idea is broadly used to improve the radiation attributes of the reception apparatus. In the proposed work a 5G Microstrip patch antenna has been planned with a FR4 substrate with a thickness of 0.4 millimeter and Dielectric constant (r) of 4.4. The simulation results accomplished in this proposed work have a decent return loss of - 31.5 dB and Bandwidth of 6 GHz and the VSWR esteem is under 1 at 28 GHz. The proposed work has a ton of advantages for online occasions and classes

RFID Reader Antenna Design for Groceries Auto Payment System

2015 ◽  
Vol 781 ◽  
pp. 28-31
Author(s):  
Amira Abd Rohim ◽  
Muhammad Ramlee Kamarudin ◽  
M.T. Ali
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Antenna Design ◽  
Center Frequency ◽  
Microstrip Patch ◽  
Rfid Reader ◽  
Reader Antenna ◽  
Good Agreement ◽  
Uhf Band

A microstrip patch antenna for RFID reader is presented in this paper. It operates within the RFID international UHF band (902-928MHz) which the center frequency is at 915MHz with 15dB of return loss value. The frequency ranges also cover the RFID UHF band for Malaysia (912-923MHz). The main objective for this antenna is to implement it in the RFID reader for an auto payment application. Some results have been shown between CST Microwave Studio, HFSS and the measurement. Good agreement is achieved for the used in the RFID UHF band.

Metamaterial Structure with Negative μ and ε for reduction of return loss of Microstrip Patch Antenna

2012 ◽  
Vol 2 (8) ◽  
pp. 130-133
Author(s):  
Amandeep Singh Amandeep Singh ◽  
◽  
Sankul Agarwal ◽  
Vaibhav Sharma ◽  
Shivam Pandita
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Metamaterial Structure ◽  
Microstrip Patch

scholarly journals Design of a Single Band Microstrip Patch Antenna for 5G Applications

2018 ◽  
Vol 7 (2.7) ◽  
pp. 532 ◽  
Author(s):  
R Siri Chandana ◽  
P Sai Deepthi ◽  
D Sriram Teja ◽  
N Veera JayaKrishna ◽  
M Sujatha
Keyword(s):  
Millimeter Wave ◽  
Patch Antenna ◽  
Return Loss ◽  
Dielectric Substrate ◽  
Microstrip Patch Antenna ◽  
Single Band ◽  
Wave Frequency ◽  
High Frequency Structure Simulator ◽  
Microstrip Patch ◽  
Simulation Purpose

This article is about a single band microstrip patch antenna used for the 5G applications. And this antenna is suitable for the millimeter wave frequency. The patch antenna design consists of 2 E shaped slots and 1 H shaped slot. These slots are loaded on the radiating patch with the 50 ohms microstrip feed line. For the simulation purpose, Rogers’s RT5880 dielectric substrate with relative permittivity of 2.2 and loss tangent of 0.0009 is used. The design and simulation of the antenna is done using HFSS (High Frequency Structure Simulator) software. The results are simulated for the parameters Return loss, VSWR, 3D Radiation pattern. The proposed antenna has a return loss of -42.4383 at 59 GHz millimeter wave frequency. 

scholarly journals A Novel Frequency Reconfigurable Microstrip Patch Antenna using Pin Diode

2020 ◽  
Vol 9 (5) ◽  
pp. 2013-2017
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Pin Diode ◽  
Optimum Level ◽  
Frequency Range ◽  
Microstrip Patch ◽  
Single Antenna ◽  
Specific Frequency ◽  
Switching State

In recent study, in the growth of wireless technology single antenna that works with a specific frequency is becoming outdated. The antenna which is capable to work dynamically is encouraged. To make an antenna to work dynamically, modification in any of the antenna characteristics can be applied. In this proposed work, the antenna which can reconfigure its frequency is designed and analyzed. Microstrip patch antenna is most popular printed type antenna which is suitable for diverse applications. The antenna design consists of three PIN diodes which are placed in different positions on the patch. Depending upon the switching state of PIN diode the antenna can operate in different frequency ranges. The frequency range obtained ranges from 1.38 GHz to 3.24 GHz. Return loss value, VSWR obtained is of optimum level. The various gain of antenna is obtained in simulation. The analysis of the antenna is done in ANSYS HFSS software.

Sign in / Sign up

Export Citation Format

Share Document