Metamaterial Structure with Negative μ and ε for reduction of return loss of Microstrip Patch Antenna

2012 ◽  
Vol 2 (8) ◽  
pp. 130-133
Author(s):  
Amandeep Singh Amandeep Singh ◽  
◽  
Sankul Agarwal ◽  
Vaibhav Sharma ◽  
Shivam Pandita
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Metamaterial Structure ◽  
Microstrip Patch

scholarly journals A High Gain & Wide Band Rectangular Microstrip Patch Antenna loaded with �Interconnected SRR� Metamaterial Structure

2012 ◽  
Vol 1 (4) ◽  
pp. 335 ◽  
Author(s):  
Pramod Singhal ◽  
Bimal Garg
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Wide Band ◽  
Microstrip Patch Antenna ◽  
Total Efficiency ◽  
Metamaterial Structure ◽  
Microstrip Patch ◽  
Rectangular Patch ◽  
Rectangular Microstrip Patch Antenna

Communication applications require wide band and highly directive planner antennas. For such requirement this work deals with the analysis and simulation of a rectangular microstrip patch antenna loaded with INTERCONNECTED SRR metamaterial structure at a height of 3.2mm from the ground plane. The work also investigates the potential properties of the proposed metamaterial structure. The proposed Antenna is designed at a operating frequency of 2.75GHz to meet S-Band (2-4GHz) applications. By loading Interconnected SRR metamaterial structure with the rectangular patch antenna at a height of 3.2mm, the antennas bandwidth is found to be increased up to 378MHz and return loss is reduced to -42.2dB i.e. the potential properties like return loss, bandwidth, directivity and total efficiency of the proposed antenna increases to a great extent in comparison to the rectangular patch antenna alone. Double Negative properties of metamaterial have been proved by Nicolson-Ross-weir (NRW) method.

scholarly journals Design of Rectangular Microstrip Patch Antenna Incorporated with Innovative Metamaterial Structure for Dual band operation and Amelioration in Patch Antenna Parameters with Negative � and ?

2012 ◽  
Vol 1 (3) ◽  
pp. 205 ◽  
Author(s):  
Bimal Garg ◽  
Rahul Dev Verma ◽  
Ankit Samadhiya
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Dual Band ◽  
Impedance Bandwidth ◽  
Metamaterial Structure ◽  
Microstrip Patch ◽  
Simulation Purpose ◽  
Rectangular Microstrip Patch Antenna

In this work a dual band rectangular microstrip patch antenna along with the innovative metamaterial structure is proposed at a height of 3.2mm from the ground plane, which consists of a rectangular geometry incorporated with c shaped structure. This work is mainly focused on increasing the potential parameters of microstrip patch antennas and analyzing the dual band operation of proposed antenna. The proposed antenna is designed to resonate at 2.478GHz and 2.919GHz frequency. The impedance bandwidth of the patch antenna along with the proposed metamaterial structure at 2.478GHz is improved by 20.4MHz and return loss is reduced by 20.128dB. At 2.919GHz the impedance bandwidth is improved by 25.4MHz and return loss is reduced by 19.564dB. For verifying that the proposed metamaterial structure possesses Negative values of Permeability and Permittivity within the operating frequency ranges, Nicolson-Ross-Weir method (NRW) has been employed. For simulation purpose CST-MWS Software has been used.

scholarly journals Microstrip Patch Antenna Loaded with Squares Shapes Metamaterial Structure For Bandwidth Improvement and Return loss

2015 ◽  
pp. 315-319
Author(s):  
Rahul Rajoria
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Ground Plane ◽  
Microstrip Patch Antenna ◽  
Impedance Bandwidth ◽  
Metamaterial Structure ◽  
Microstrip Patch ◽  
Rectangular Microstrip Patch Antenna ◽  
Cst Microwave Studio

In this work, The drawback of Patch Antenna was impedance bandwidth. For this purpose, Rectangular microstrip patch antenna loaded with metamaterial structure has been proposed for improving the bandwidth by using CST MICROWAVE STUDIO in this paper. The proposed antenna is designed at a height 3.2 from the ground plane by using CST MICROWAVE STUDIO. The bandwidth of Microstrip patch antenna is 12 .1MHz and return loss is -10.36 dB at a band.The bandwidth of desired antenna is increased up 61.7 MHz at 2.925 GHz and 27 MHz at 1.965 GHz. The return loss of proposed antenna is reduced up to -35.55db at 2.925 GHz and -29 db at 1.965 GHz. This proposed design has small size, easy to fabricate and better directivity.

scholarly journals Design of a Single Band Microstrip Patch Antenna for 5G Applications

2018 ◽  
Vol 7 (2.7) ◽  
pp. 532 ◽  
Author(s):  
R Siri Chandana ◽  
P Sai Deepthi ◽  
D Sriram Teja ◽  
N Veera JayaKrishna ◽  
M Sujatha
Keyword(s):  
Millimeter Wave ◽  
Patch Antenna ◽  
Return Loss ◽  
Dielectric Substrate ◽  
Microstrip Patch Antenna ◽  
Single Band ◽  
Wave Frequency ◽  
High Frequency Structure Simulator ◽  
Microstrip Patch ◽  
Simulation Purpose

This article is about a single band microstrip patch antenna used for the 5G applications. And this antenna is suitable for the millimeter wave frequency. The patch antenna design consists of 2 E shaped slots and 1 H shaped slot. These slots are loaded on the radiating patch with the 50 ohms microstrip feed line. For the simulation purpose, Rogers’s RT5880 dielectric substrate with relative permittivity of 2.2 and loss tangent of 0.0009 is used. The design and simulation of the antenna is done using HFSS (High Frequency Structure Simulator) software. The results are simulated for the parameters Return loss, VSWR, 3D Radiation pattern. The proposed antenna has a return loss of -42.4383 at 59 GHz millimeter wave frequency. 

scholarly journals A Novel Frequency Reconfigurable Microstrip Patch Antenna using Pin Diode

2020 ◽  
Vol 9 (5) ◽  
pp. 2013-2017
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Pin Diode ◽  
Optimum Level ◽  
Frequency Range ◽  
Microstrip Patch ◽  
Single Antenna ◽  
Specific Frequency ◽  
Switching State

In recent study, in the growth of wireless technology single antenna that works with a specific frequency is becoming outdated. The antenna which is capable to work dynamically is encouraged. To make an antenna to work dynamically, modification in any of the antenna characteristics can be applied. In this proposed work, the antenna which can reconfigure its frequency is designed and analyzed. Microstrip patch antenna is most popular printed type antenna which is suitable for diverse applications. The antenna design consists of three PIN diodes which are placed in different positions on the patch. Depending upon the switching state of PIN diode the antenna can operate in different frequency ranges. The frequency range obtained ranges from 1.38 GHz to 3.24 GHz. Return loss value, VSWR obtained is of optimum level. The various gain of antenna is obtained in simulation. The analysis of the antenna is done in ANSYS HFSS software.

scholarly journals Omnidirectional Microstrip Patch Antenna for 2.4 GHz Wireless Communications

2021 ◽  
Vol 2114 (1) ◽  
pp. 012051
Author(s):  
Alaa M. Abdulhussein ◽  
Ali H. Khidhi ◽  
Ahmed A. Naser
Keyword(s):  
Computer Simulation ◽  
Wireless Communications ◽  
Wireless Communication ◽  
Patch Antenna ◽  
Communication Systems ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Wireless Communication Systems ◽  
Microstrip Patch ◽  
Operating Bandwidth

Abstract Antenna studies on various wireless communication systems have been carried out by many academics. In this research, the omnidirectional microstrip patch antenna (MPA) is proposed, manufactured, and tested. The operating bandwidth of the antenna is quite suitable for the different applications. The proposed antenna fabricated on the flame retardant (FR-4) substrate with a volume of 75.85 × 57.23 × 1.59 mm3. Computer simulation technology (CST) studio used to design and simulate. Experimental results show that the return loss (RL), bandwidth (BW), voltage standing wave ratio (VSWR) and input impedance (Zin ) are -25.26 dB, 61 MHz, 1.12 and 54.46 Ω, respectively. The antenna operates at 2.42 GHz (from 2.39 to 2.45 GHz), which has good performance in the Wi-Fi, Bluetooth, and ZigBee communications.

scholarly journals Gain Enhancement of Microstrip Antenna using Ebg Structure for Wi-Fi Application

2019 ◽  
Vol 9 (1) ◽  
pp. 1213-1217
Keyword(s):  
Patch Antenna ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Simulation Software ◽  
Single Frequency ◽  
Total Size ◽  
Compact Structure ◽  
Gain Enhancement ◽  
Microstrip Patch ◽  
Low Profile

A microstrip patch antenna is low profile antenna mounted over a high impedance electromagnetic bandgap (EBG) substrate is proposed. In this paper, Microstrip patch antenna with rectangular EBG structure is proposed and studied. The proposed antenna has compact structure with a total size of 29.44x38.036mm2 . The designed antenna resonates at Particular Single frequency with improved return loss, VSWR and gain. The resonant frequency of the antenna 2.4GHz without and with EBG and improved return loss of -17.61dB and -18.30dB. With rectangular EBG the antenna gives improved gain of 2.09 dB. The Proposed antenna is simulated by using Simulation software ie.(IE3D) and simulated results are in good with practical antenna characteristics.

UWB RECTANGULAR SLOTTED MICROSTRIP PATCH ANTENNA IN PROXIMITY OF HUMAN ARM MODEL

2016 ◽  
Vol 78 (5-4) ◽  
Author(s):  
Muhammad Syafiq Noor Azizi ◽  
Azahari Salleh ◽  
Adib Othman ◽  
Najmiah Radiah Mohamad ◽  
Nor Azlan Aris ◽  
...  
Keyword(s):  
Dielectric Constant ◽  
Patch Antenna ◽  
Free Space ◽  
Return Loss ◽  
Microstrip Patch Antenna ◽  
Ultra Wideband ◽  
Uwb Antenna ◽  
Study Behavior ◽  
Microstrip Patch ◽  
Human Arm

In this paper, we study behavior of Ultra wideband antenna which is Rectangular Slotted Microstrip Patch Antenna. Then, the antenna operated in proximity of human arm model. Furthermore, the antenna is designed on a FR-4 substrate with dielectric constant of 4.3 and thickness 1.6 mm. This antenna simulated in CST Microwave Studio software. In order to test the antenna, an arm model was numerically modelled. The study shows properties and performances of antenna when it is placed in three situations which in free space, outside and inside of human arm model. The properties of UWB antenna in term of return loss, gain, directivity and radiation pattern in the three situations is simulated and discussed.

Sign in / Sign up

Export Citation Format

Share Document