Finite Element Analysis of the Piston Thermal Load in a Diesel Engine

2013 ◽  
Vol 459 ◽  
pp. 304-309
Author(s):  
Qing Ping Zheng ◽  
Chun Yan Ma ◽  
Jie Zhong Zhang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Diesel Engine ◽  
Thermal Load ◽  
Thermal Strain ◽  
Three Dimensional ◽  
Maximum Temperature ◽  
Ring Groove ◽  
Element Analysis ◽  
Three Dimensional Modeling

Three-dimensional modeling and finite element analysis on the diesel engine piston is carried out in the paper. The distribution of temperature, stress and strain within piston at the rated conditions of the engine are obtained from the simulation. The calculated temperature is consistent with the results of the piston surface temperature which is obtained by hardness plug method, thus confirming the model's validity. The calculated maximum temperature is 374 °C and the minimum temperature is 144 °C. The maximum stress is 118MPa located between the piston skirt above the pin hole and the third ring groove. The maximum thermal strain appears at the piston top with the value of 6.29×10-3. Finally, the temperature simulation of the piston adopted oil-splashing cooling is implemented. It is proved that thermal load can be further reduced through cooling measure.

Motion Simulation and Finite Element Analysis of the Manipulator Based on SolidWorks

2014 ◽  
Vol 596 ◽  
pp. 640-645
Author(s):  
Peng Lu ◽  
Dao Lai Cheng ◽  
Gang Shi ◽  
Zhi Hao Zhou ◽  
Nan Kun Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Motion Simulation ◽  
Welding Robot ◽  
Element Analysis ◽  
Work Space ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
Design Structure

It will use SolidWorks to design structure of Manipulator and to establish the Three-dimensional Modeling based on automated welding robot of Shanghai Bamac Electric Technology Co., Ltd.,then by using the plug of simulation and motion of SolidWorks, it will focus on the Motion Simulation and Finite Element Analysis of the Manipulator. Finally the trajectory and the work space of the Manipulate can be received, and provide a basis of manipulator analysis in order to optimize the manipulator for the company.

Development of Cylinder with Multiple Diagonal Slits for Ultrasonic Longitudinal - Torsional Vibration Turn-Milling

2010 ◽  
Vol 139-141 ◽  
pp. 2291-2294
Author(s):  
Yun Dian Zhang ◽  
Bing Zhang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Electrical Discharge Machining ◽  
Three Dimensional ◽  
Element Analysis ◽  
Three Dimensional Modeling ◽  
The Finite Element Analysis ◽  
Traditional Processing ◽  
Forming Tools ◽  
Analysis Of Error

Cylinder with multiple diagonal slits is one of the core parts of longitudinal-torsional resonance ultrasonic device. Its structure was more complex, the traditional processing processed it very difficult, and the traditional analytical methods were also difficult to make accurate description to system. The paper researched cylinder with multiple diagonal slits using experimental method, analysis of electrical discharge machining forming tools of the slits and three-dimensional modeling; developed cylinder with multiple diagonal slits, analyzed longitudinal-torsional resonance and mechanical properties of cylinder with multiple diagonal slits using finite element analysis method. Tested resonant frequency of cylinder with multiple diagonal slits with precision impedance analyzer. The finite element analysis results compared with tested results, and analysis of error between them, finite element analysis results slightly lower than the test results but the error was within the allowed range. Comparison of results and analysis of error indicated that developed cylinder with multiple diagonal slits meet requirement.

Finite Element Analysis on Hybrid City Bus Frame Based on ANSYS-Workbench14

2014 ◽  
Vol 662 ◽  
pp. 214-219 ◽  
Author(s):  
Ming Lei Wan ◽  
Zuo Qiang Dai ◽  
Hong Xin Zhang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Element Analysis ◽  
Maximum Deformation ◽  
City Bus ◽  
Three Dimensional Modeling ◽  
New Energy ◽  
Inherent Frequency ◽  
Stress And Deformation

Abstract. For analyzing the frame whether meets actual driving needs, LCK6105PHENV-type hybrid (electric and gas) city bus frame as research object, using Solidworks12 and ANSYS-Workbench14 on frame, respectively, for the three-dimensional modeling and finite element analysis. Static analysis obtains frame’s stress and deformation results under the condition of bending and reversing (wheels dangling), modal analysis gets frame’s front 6 order vibration type, inherent frequency and the maximum deformation. Analyzing results shows that the frame basically can meet the design requirements, and in line with the actual needs of living and production. This research will provide references for optimization and improvement of new-energy Auto frame.

Based on Pro/E and Ansys'Finite Element Analysis of Conveying Roller

2012 ◽  
Vol 271-272 ◽  
pp. 797-800
Author(s):  
Chan Juan Chen ◽  
Zhou Wen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Local Strain ◽  
Analysis Software ◽  
Roller Conveyor ◽  
Element Analysis ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
Modeling Software

In order to study conveying roller force and improve its mechanical properties, we use three-dimensional modeling software Pro/E to build the solid model of the Apple box delivery device’s conveying roller. Using finite element analysis software Ansys to analyze conveying roller’s bending stress, we can get images of local strain and displacement contours .Contrasting with factory’s broken roller conveyor, we can find that: through the establishment of appropriate boundary conditions, Ansys can accurate finite element analysis, and provide the basis for the conveying roller structure improvements.

Modal Analysis of the Gantry Milling and Boring Machine Tool Beam Based on FEM

2012 ◽  
Vol 151 ◽  
pp. 424-428
Author(s):  
Zhong Liang Cao ◽  
Yan Ding ◽  
Qing Ming Hu ◽  
Qiang Guo
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Modal Analysis ◽  
Structural Characteristics ◽  
Three Dimensional ◽  
Relative Deformation ◽  
Milling Machine ◽  
Element Analysis ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling

Fixed beam gantry for large CNC boring and milling machine to bear the beams on the rail side apron, and other parts ram weight under weight and size of deformation produced a result of the assembly accuracy of less than standard, use three-dimensional modeling software UG and finite element analysis software ANSYS for dynamic beam gantry milling machine CNC beam three-dimensional modeling and modal analysis, based on weight and apron beams, the weight of ram and other components in relative deformation amplitude, and the gantry milling machine processing characteristics and overall design of the structural characteristics of machine tools, assembly of the beam is proposed to note some issues and some ways to solve the assembly size requirements, through finite element analysis of the deformation and comparing the actual measured value, the experiment proved data on-site assembly solution with a good theoretical support.

Finite Element Analysis and Structure Design for Chassis of Aircraft Towbarless Tractor

2011 ◽  
Vol 328-330 ◽  
pp. 690-694
Author(s):  
Zhi Wei Xing ◽  
Yong Lv ◽  
Jun Hui Li
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Structure Design ◽  
The Body ◽  
Element Analysis ◽  
Future Design ◽  
Ground Support ◽  
Three Dimensional Modeling ◽  
Entire Vehicle

Aircraft tow-tractor is one of the absolutely necessary ground support equipments (GSE) in the airport. The chassis is the framework on which the body and working parts of the tow-tractor, what plays a significant role in a entire vehicle design. The endurance and rigidity of the chassis have a direct influence on the reliability and practicability. In this paper, a simplified model is established for the carriage of aircraft towbarless tractor on the three-dimensional modeling platform--Proe5.0, and then mechanical finite element analysis are proceeding by Ansys12.0. The results show that the chassis model is of a appropriate structure and the design coincides with actual requirements, the Stress Concentration at the joint between carriage and wheel-grip mechanism has been reduced substantially. All trial results have laid a foundation for future design of the entire tractor.

Three-Dimensional Modeling and Finite Element Analysis of the Hydraulic Support

2013 ◽  
Vol 712-715 ◽  
pp. 1002-1005
Author(s):  
Ling Hui Li ◽  
Xiao Wen Zheng
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Dimensional Model ◽  
Three Dimensional Model ◽  
Hydraulic Support ◽  
Element Analysis ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
Partial Load

A three-dimensional model of two columns covering hydraulic support was created by Pro/E software. The model was imported into ABAQUS software for finite element analysis. The stresss distribution of the hydraulic support in the conditions of the top beam partial load and the base reversed was got. The result was a reference in the design and structural optimization of the hydraulic support.

Sign in / Sign up

Export Citation Format

Share Document