The Initial Life and Short Crack Propagation Life for Low Carbon Steel Based on Dislocation Method

2018 ◽  
Vol 1145 ◽  
pp. 1-7
Author(s):  
Yuan Long Yang ◽  
Qing Chun Meng ◽  
Wei Ping Hu
Keyword(s):  
Fatigue Life ◽  
Carbon Steel ◽  
Crack Propagation ◽  
Low Carbon Steel ◽  
Short Crack ◽  
Low Carbon ◽  
Grain Sizes ◽  
Steel Material ◽  
The Relationship ◽  
Good Agreement

In the paper, the relationship between the grain size and fatigue life are studied. To specify the initial and short crack propagation life of low carbon steel material, three methods are used in the simulation. At first, the K. Tanaka’s model is introduced to calculate the fatigue life of a grain. Then, the Voronoi Diagram is used to generate the microstructure of grains. At last, a criteria to specify the short crack is proposed. Based on these methods, the numerical simulation is conducted. With the help of the process, the grain sizes are generated randomly in order to specify how grain sizes effect fatigue life. The computational results are in good agreement with the experimental data. The results show that the randomness of fatigue life is closely related to the randomness of grain sizes.

The Effect of Small Defects on Fatigue Life of a Low Carbon Steel

2019 ◽  
Author(s):  
Natalia Gonçalves Torres ◽  
Vinícius Rodrigues ◽  
Edgar Mamiya
Keyword(s):  
Fatigue Life ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Low Carbon

The Corrosion of Carbon Steel and Stainless Steel in Simulated Geothermal Media

1985 ◽  
Vol 38 (8) ◽  
pp. 1133 ◽  
Author(s):  
BG Pound ◽  
MH Abdurrahman ◽  
MP Glucina ◽  
GA Wright ◽  
RM Sharp
Keyword(s):  
Carbon Steel ◽  
Corrosion Rate ◽  
Stainless Steels ◽  
Polarization Resistance ◽  
Iron Sulfide ◽  
Low Carbon Steel ◽  
Passive Films ◽  
Low Carbon ◽  
Corrosion Rates ◽  
Good Agreement

The corrosion rates of low-carbon steel, and 304, 316 and 410/420 stainless steels in simulated geothermal media containing hydrogen sulfide have been measured by means of the polarization resistance technique. Good agreement was found between weight-loss and polarization resistance measurements of the corrosion rate for all the metals tested. Carbon steel formed a non-adherent film of mackinawite (Fe1 + xS). The lack of protection afforded to the steel by the film resulted in an approximately constant corrosion rate. The stainless steels also exhibited corrosion rates that were independent of time. However, the 410 and 420 alloys formed an adherent film consisting mainly of troilite ( FeS ) which provided only limited passivity. In contrast, the 304 and 316 alloys appeared to be essentially protected by a passive film which did not seem to involve an iron sulfide phase. However, all the stainless steels, particularly the 410 and 420 alloys, showed pitting, which indicated that some breakdown of the passive films occurred.

scholarly journals PROSES PEMBUATAN ARANG BATOK KELAPA DAN TULANG SAPI MENGGUNAKAN METODE PIROLISIS SEBAGAI MEDIA CARBURIZING

POROS ◽  
2021 ◽  
Vol 16 (2) ◽  
pp. 111
Author(s):  
Tumpal Ojahan Ojahan ◽  
Miswanto Miswanto Miswanto ◽  
Slamtt Sumardi Sumardi
Keyword(s):  
Carbon Steel ◽  
Waste Product ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
Main Ingredient ◽  
Fixed Carbon ◽  
Steel Material ◽  
The Media ◽  
Food Needs ◽  
Coconut Shells

Fueled by a rise in food needs as beef and oil into basic commodities has been consumed by thepublic, has lead the increasing of waste the cows and coconut shell. The main ingredient used in thisresearch is a waste product from cow bones and from the remains of the coconut shells from which no orhousehold wastes, that can be processed into charcoal. The purpose of this research which is to enhanceeconomic value of waste from cow bones and coconut shells using combustion pyrolysis system beingcharred (fixed carbon) to produce good quality charcoal, to find out the extent of the temperature used andthe composition of charcoal. The process used in this research is pack carburizing with cow bones andcoconut shell as the media at the temperature 950oC, time detention three hours with variations compositioncharcoal. It can be concluded that charcoal bone across his cattle and charcoal coconut can be used as asource of carbon that might improve the force and hardness in the material carbon steel low (low carbonsteel). The process of pack carburizing can increase the value of % C, against low carbon steel material.

scholarly journals Fatigue Crack Propagation in Low-Carbon Steel under Doubly-Repeated Stress

1972 ◽  
Vol 21 (231) ◽  
pp. 1142-1149 ◽  
Author(s):  
Shuji TAIRA ◽  
Keisuke TANAKA ◽  
Tomoaki SHIMADA
Keyword(s):  
Fatigue Crack ◽  
Carbon Steel ◽  
Crack Propagation ◽  
Fatigue Crack Propagation ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
Repeated Stress

Fatigue life of steel 40Kh specimens after wear-resistant surfacing with a sublayer of low-carbon steel

2021 ◽  
Vol 2021 (3) ◽  
pp. 2-8
Author(s):  
І.О. Ryabtsev ◽  
◽  
V.V. Knysh ◽  
A.A. Babinets ◽  
S.O. Solovej ◽  
...  
Keyword(s):  
Fatigue Life ◽  
Carbon Steel ◽  
Low Carbon Steel ◽  
Steel 40Kh ◽  
Low Carbon ◽  
Wear Resistant

Fatigue crack propagation behaviour in ultra-fine grained low carbon steel

2005 ◽  
Vol 27 (3) ◽  
pp. 235-243 ◽  
Author(s):  
M CHAPETTI ◽  
H MIYATA ◽  
T TAGAWA ◽  
T MIYATA ◽  
M FUJIOKA
Keyword(s):  
Fatigue Crack ◽  
Carbon Steel ◽  
Crack Propagation ◽  
Fatigue Crack Propagation ◽  
Low Carbon Steel ◽  
Low Carbon ◽  
Fine Grained
Sign in / Sign up

Export Citation Format

Share Document