Research on Preparation and Characterization of Easy-to-Open Tear Tape for Corrugated Carton

2010 ◽  
Vol 174 ◽  
pp. 525-530
Author(s):  
Li Qiang Huang ◽  
Mo Liu
Keyword(s):  
Tensile Strength ◽  
Open System ◽  
Open Technique ◽  
Pressure Sensitive Adhesive ◽  
Corrugated Board ◽  
Pressure Sensitive ◽  
Acrylic Fibers ◽  
Different Thickness

This paper presented a novel tape, which was used to open the corrugated cartons more easily and quickly. Structure of the tear tape consisted of backing materials (acrylic fibers), adhesive (acrylic pressure-sensitive adhesive) and release paper. Prepared tear tapes with different thickness, analyzed the influence of tear tape thickness on performance of open system and added them to the corrugated board, then tested the opening properties of the corrugated board above. The results indicate that the tape, with 0.18mm in thickness and about 25mm in width, can split high quantitative corrugated board smoothly, the tensile strength for opening is 105N at maximum, which means these tape can satisfy the needs of easy-to-open technique.

Passivation of pressure sensitive adhesive stickies by addition of acrylic fibers to OCC pulp before papermaking

TAPPI Journal ◽  
2016 ◽  
Vol 15 (10) ◽  
pp. 631-639
Author(s):  
MOHAMMAD HADI ARYAIE MONFARED ◽  
HOSSEIN RESALATI ◽  
ALI GHASEMIAN ◽  
MARTIN A. HUBBE
Keyword(s):  
Adverse Effects ◽  
Control Sample ◽  
Pressure Sensitive Adhesive ◽  
Acrylic Fiber ◽  
Burst Strength ◽  
Pressure Sensitive Adhesives ◽  
Pressure Sensitive ◽  
Tear Index ◽  
Breaking Length ◽  
Acrylic Fibers

This study investigated the addition of acrylic fiber to old corrugated container (OCC) pulp as a possible means of overcoming adverse effects of water-based pressure sensitive adhesives during manufacture of paper or paperboard. Such adhesives can constitute a main source of stickies, which hurt the efficiency of the papermaking process and make tacky spots in the product. The highest amount of acrylic fiber added to recycled pulps generally resulted in a 77% reduction in accepted pulp microstickies. The addition of acrylic fibers also increased pulp freeness, tear index, burst strength, and breaking length, though there was a reduction in screen yield. Hence, in addition to controlling the adverse effects of stickies, the addition of acrylic fibers resulted in the improvement of the mechanical properties of paper compared with a control sample.

Preparation and characterization of modified telechelic natural rubber-based pressure-sensitive adhesive

2017 ◽  
Vol 31 (24) ◽  
pp. 2682-2696 ◽  
Author(s):  
Siriwat Radabutra ◽  
Sayan Saengsuwan ◽  
Rukkiat Jitchati ◽  
Morakot Kalapat
Keyword(s):  
Natural Rubber ◽  
Pressure Sensitive Adhesive ◽  
Pressure Sensitive

scholarly journals Pressure-sensitive Adhesive Liquid Marble: Fabrication and Characterization of Structure and Adhesive Property

2017 ◽  
Vol 64 (3) ◽  
pp. 121-125 ◽  
Author(s):  
Syuji FUJII ◽  
Seiji TAKEUCHI ◽  
Masami EDAHIRO ◽  
Satoshi YOSHIMI ◽  
Akinori KOGURE ◽  
...  
Keyword(s):  
Adhesive Property ◽  
Pressure Sensitive Adhesive ◽  
Pressure Sensitive ◽  
Liquid Marble ◽  
Fabrication And Characterization

ATR-FTIR characterization of old pressure sensitive adhesive tapes in historic papers

2016 ◽  
Vol 21 ◽  
pp. 775-785 ◽  
Author(s):  
Andrea Gorassini ◽  
Gianpiero Adami ◽  
Paolo Calvini ◽  
Alessandro Giacomello
Keyword(s):  
Pressure Sensitive Adhesive ◽  
Pressure Sensitive ◽  
Ftir Characterization
Sign in / Sign up

Export Citation Format

Share Document