Study on Determination Method of the Volatile Organic Compounds Emissions from Particleboards for Indoor Finishing

2011 ◽  
Vol 250-253 ◽  
pp. 935-938 ◽  
Author(s):  
Shi Jing Sun ◽  
Jun Shen ◽  
Zhong Yuan Zhao
Keyword(s):  
Volatile Organic Compounds ◽  
Organic Compounds ◽  
Solid Phase ◽  
Practical Method ◽  
Simple Operation ◽  
Good Shape ◽  
Volatile Organic ◽  
Static Head ◽  
And Control ◽  
Larix Gmelini

In order to comprehensive understand and control volatile organic compounds (VOCs) release from particleboards, this paper takes Larix gmelini particleboard as example and analyzes VOCs by three different methods. First of all, VOCs of Larix gmelini particles were detected by the static head space solid-phase micro-extraction (HS-SPME) technique. Secondly Larix gmelini particleboards were analyzed using the method of adsorbed by activated carbon, desorpted with methylene dichloride and measured by GC/MS. Finally, Tenax-T Thermal desorption -GC/MS was used to qualitative VOCs emissions. The best method for determination VOCs from particleboards was found. SPME is a simple operation method with short time. But the pretreatment of sample was troublesome and it is not easily measured for lower concentration particleboards. Active carbon absorption method is not suitable for quantitative because of much error in extraction. It is suitable for qualitative analysis. Tenax-T is a simple operation way with short analysis time and good shape of chromatographic. It is a convenient and practical method. Further study of VOCs emission of panels can be supported by this method.

A Novel Method for the Analysis of Volatile Organic Compounds (VOCs) from Red Flour Beetle Tribolium castaneum (H.) using Headspace-SPME Technology

2020 ◽  
Vol 16 (4) ◽  
pp. 404-412 ◽  
Author(s):  
Ihab Alnajim ◽  
Manjree Agarwal ◽  
Tao Liu ◽  
YongLin Ren
Keyword(s):  
Volatile Organic Compounds ◽  
Organic Compounds ◽  
Tribolium Castaneum ◽  
Solid Phase ◽  
Chemical Signals ◽  
Red Flour Beetle ◽  
Specific Chemical ◽  
Flour Beetle ◽  
Volatile Organic ◽  
Spme Fibre

Background: The red flour beetle, Tribolium castaneum (Herbst) (Coleoptera: Tenebrionidae) is one of the world’s most serious stored grain insect pests. A method of early and rapid identification of red flour beetle in stored products is urgently required to improve control options. Specific chemical signals identified as Volatile Organic Compounds (VOCs) that are released by the beetle can serve as biomarkers. Methods: The Headspace Solid Phase Microextraction (HS-SPME) technique and the analytical conditions with GC and GCMS were optimised and validated for the determination of VOCs released from T. castaneum. Results: The 50/30 μm DVB/CAR/PDMS SPME fibre was selected for extraction of VOCs from T. castaneum. The efficiency of extraction of VOCs was significantly affected by the extraction time, temperature, insect density and type of SPME fibre. Twenty-three VOCs were extracted from insects in 4 mL flask at 35 ± 1°C for four hours of extraction and separated and identified with gas chromatography-mass spectroscopy. The major VOCs or chemical signals from T. castaneum were 1-pentadecene, p-Benzoquinone, 2-methyl- and p-Benzoquinone, 2-ethyl. Conclusion: This study showed that HS-SPME GC technology is a robust and cost-effective method for extraction and identification of the unique VOCs produced by T. castaneum. Therefore, this technology could lead to a new approach in the timely detection of T. castaneum and its subsequent treatment.

Development of a Headspace-Solid Phase Micro Extraction Method for the Analysis of Volatile and Semi-Volatile Organic Compounds from Polyurethane Resins for Leather Finishing

2021 ◽  
Vol 116 (8) ◽  
Author(s):  
Antonia Flores ◽  
Silvia Sorolla ◽  
Concepció Casas ◽  
Rosa Cuadros ◽  
Anna Bacardit
Keyword(s):  
Gas Chromatography ◽  
Volatile Organic Compounds ◽  
Organic Compounds ◽  
Solid Phase ◽  
Monomethyl Ether ◽  
Gas Chromatography Mass Spectrometry ◽  
Extraction Temperature ◽  
Solid Phase Micro Extraction ◽  
Volatile Organic ◽  
Leather Finishing

Volatile organic compounds (VOCs) and Semi-Volatile Organic Compounds (SVOCs) arise from the chemicals used in the various stages of the leather manufacturing process. An important aim of the tanning industry is to minimize or eliminate VOCs and SVOCs, without lowering the quality of leather.   This paper shows the development of a new headspace-solid phase micro extraction coupled with gas chromatography–mass spectrometry (HS-SPME/GC-MS) method for the identification of VOCs and SVOCs emitted by newly designed polymers for the leather finishing operation. These new polymers are polyurethane resins designed to reduce the VOC and SVOC concentration. This method enables a simple and fast determination of the qualitative and semi-quantitative content of VOCs and SVOCs in polyurethane-type finishing resins. The chemicals that are of concern in this paper are the following: Dipropylene glycol Monomethyl Ether (DPGME), DBE-3 (a mixture of dibasic esters) and Triethylamine (TEA). The test conditions that have been determined to carry out the HS-SPME assay are the following: incubation time (2 hours), extraction temperature and time (40°C; 5 minutes) and the desorption conditions (280°C, 50 seconds).  Ten samples of laboratory scale resins were tested by HS-SPME followed by gas chromatography (GC-MS). DPGME and DBE-3 (a mixture of dimethyl adipate, dimethyl glutarate and dimethyl succinate) have been identified effectively. The compounds are identified by a quantitative method using external calibration curves for the target compounds. The technique is not effective to determine the TEA compound, since the chromatograms shown poor resolution peaks for the standard. 

Sign in / Sign up

Export Citation Format

Share Document