Chloride Diffusion Characteristics of the New Interface Transition Zone in Recycled Aggregate Concrete

2011 ◽  
Vol 261-263 ◽  
pp. 104-110
Author(s):  
Hai Long Wang ◽  
Jun Jie Wang ◽  
Xiao Yan Sun ◽  
Juan Cheng
Keyword(s):  
Diffusion Coefficient ◽  
Steady State ◽  
Transition Zone ◽  
Chloride Transport ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Chloride Diffusion ◽  
Chloride Diffusion Coefficient ◽  
Aggregate Concrete ◽  
Phosphorous Slag

A three-part model (mortar, original concrete and ITZ) was established in this study to analyze the chloride coefficient of the new interfacial transition zone (ITZ) in recycled aggregate concrete (RAC). Based on this model, a formula for calculation was derived from the chloride transport characteristics in the steady state. Two types of RAC were used to study the properties of ITZ by steady-state migration test and Scanning Electron Microscope (SEM) method. The results indicate that the chloride diffusion coefficient of new ITZ in RAC is about 1 to 4 cm2/year, and that the addition of superfine phosphorous slag (PHS) not only reduces the chloride diffusion coefficient of mortar but also decreases the thickness and the chloride diffusion coefficient of new ITZ in RAC due to its pozzolanic reaction effect. The chloride permeability of mortar containing 20% PHS is only 1/5 of that in normal RAC. The chloride diffusion coefficient of ITZ in normal RAC is about 10 times greater than that of ordinary mortar. When modified with PHS and superplasticizer, the permeability of chloride in new ITZ is 3 to 7 times greater than that in the ordinary bulk cement paste. Furthermore, the mechanism and the effects of superfine phosphorous slag (PHS) on the resistivity of chloride permeation were discussed on basis of the experimental results and the images of SEM.

Diffusion of Multi-Ionic Species in Recycled Aggregate Concrete

2011 ◽  
Vol 477 ◽  
pp. 56-64 ◽  
Author(s):  
Nattapong Damrongwiriyanupap ◽  
Yu Chang Liang ◽  
Yun Ping Xi
Keyword(s):  
Diffusion Coefficient ◽  
Cement Paste ◽  
Recycled Aggregate Concrete ◽  
Phase Model ◽  
Recycled Aggregate ◽  
Chloride Diffusion ◽  
Chloride Diffusion Coefficient ◽  
Aggregate Concrete ◽  
Multi Scale ◽  
Multi Phase

In recent years, recycled aggregate concrete has been used in reinforced concrete structures. Concrete structures exposed to chloride environment often encountera premature deterioration due to corrosion of steel reinforcement. In order to avoid unplanned maintenances or repairs, it is necessary to develop a reliable prediction model for the chloride diffusion in concrete. The basic formulation of the transport theory will be presented first and then its application to Recycled Aggregate Concrete (RAC) will follow. Chloride diffusion in RAC is different from the diffusion in regular concrete, because the material parameters of RAC such as chloride diffusion coefficient are different from those of regular concrete. In this paper, a multi-scale and multi-phase model will be developed to characterize theinternal structure of the recycled aggregate with a layer of residual cement paste on the surface of natural aggregate and another layer of surface treatment material on the surface of the residual cement paste. The multi-scale and multi-phase model will also be used to characterize the chloride diffusion coefficient of RAC. The numerical analysis of the diffusion equations is performed by using finite element method.

Experimental Study on the Chloride Diffusivity of Recycled Aggregate Concrete

2010 ◽  
Vol 168-170 ◽  
pp. 1404-1408
Author(s):  
He Ying Qin ◽  
Yan Lin Zhao ◽  
Bo Guang Luo ◽  
Yi Hu Chen
Keyword(s):  
Diffusion Coefficient ◽  
Fly Ash ◽  
Silica Fume ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Chloride Diffusion ◽  
Partial Replacement ◽  
Chloride Diffusion Coefficient ◽  
Aggregate Concrete ◽  
Chloride Diffusivity

The study presented herein has been carried out in order to investigate the chloride diffusivity of recycled aggregate concrete (RAC). Meanwhile, the effect of the binder type, involving cement replacement materials such as, fly ash, slag and silica fume on the chloride diffusivity has also been investigated. For this purpose, RAC and concrete containing the different type of binders with w/b ratios of 0.35, 0.40, 0.45, 0.50, 0.55, and 0.60 were used. As a result, the chloride diffusion coefficient of RAC is higher than that of natural concrete and the partial replacement of cement with fly ash, slag and silica fume is effective in decrease in the chloride diffusion coefficient, measured by a rapid chloride conductivity test.

scholarly journals Experimental study on the compressive strength, damping and interfacial transition zone properties of modified recycled aggregate concrete

2019 ◽  
Vol 6 (12) ◽  
pp. 190813
Author(s):  
Bin Lei ◽  
Huajian Liu ◽  
Zhimin Yao ◽  
Zhuo Tang
Keyword(s):  
Compressive Strength ◽  
Fly Ash ◽  
Transition Zone ◽  
Loss Factor ◽  
Steel Fibre ◽  
Interfacial Transition Zone ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Damping Properties ◽  
Aggregate Concrete

At present, many modification methods have been proposed to improve the performance of recycled aggregate concrete (RAC). In this study, tests on the compressive strength and damping properties of modified RAC with the addition of different proportions of recycled coarse aggregate (RCA) (0, 50, 100%), rubber powder (10, 15, 20%), steel fibre (5, 7.5, 10%) and fly ash (15, 20, 5%) are carried out. To elucidate the effect of the modification method on the interfacial transition zone (ITZ) performance of RAC, model ITZ specimens are used for push-out tests. The results show that when the replacement rate of RCA reaches 100%, the loss factor of the RAC is 6.0% higher than that of natural aggregate concrete; however, the compressive strength of the RAC decreases by 22.6%. With the addition of 20% rubber powder, the damping capacity of the modified RAC increases by 213.7%, while the compressive strength of the modified RAC decreases by 47.5%. However, with the addition of steel fibre and fly ash, both the compressive strength and loss factor of the RAC specimens increase. With a steel fibre content of 10 wt%, the compressive strength and loss factor of the RAC increase by 21.9% and 15.2%, respectively. With a fly ash content of 25 wt%, the compressive strength and loss factor of the RAC increase by 8.6% and 6.9%, respectively. This demonstrates that steel fibre and fly ash are effective in improving both the damping properties and compressive strength of RAC, and steel fibre is more effective than fly ash. Two methods were used for modification of the RAC: reinforcing the RCA through impregnation with a 0.5% polyvinyl alcohol (PVA) emulsion and nano-SiO 2 solution, and strengthening the RAC integrally through the addition of fly ash as an admixture. Both of these techniques can improve the ITZ bond strength between the RAC and new mortar. Replacing 10% of the cement with fly ash in the new mortar is shown to be the best method to improve the ITZ strength.

Microstructure and Finite Element Analysis of Recycled Aggregate Concrete

2013 ◽  
Vol 357-360 ◽  
pp. 1383-1388 ◽  
Author(s):  
Hai Feng Yang ◽  
Zhi Heng Deng ◽  
Yue Feng Hu
Keyword(s):  
Finite Element ◽  
Transition Zone ◽  
Weak Link ◽  
Recycled Aggregate Concrete ◽  
Interfacial Structure ◽  
Recycled Aggregate ◽  
Element Analysis ◽  
Aggregate Concrete ◽  
Finite Element Software ◽  
Structure And Microstructure

In order to study the mechanistic differences between recycled aggregate concrete (RAC)and normal aggregate concrete(NAC), the magnifier and scanning electron microscope were used to observe the meso-interfacial structure and microstructure of interfacial transition zone morphology of the RAC respectively, and analysed differences between RAC and NAC; Secondly, the finite element software ABAQUS was used to simulation the simplified model of RAC. The above analysis results show that, there existe a transition zone in the interface, the aggregate-new mortar interface as well as the new-old mortar interface has been obvious cracks before loading, this part is the weak link of RAC ;After loading, the crack occurs first in the old interface, then appeared at the new interface, and then develop to the old mortar, finally, there formed a through crack.

The Multiscale Spectral Stochastic Finite Element Method for Chloride Diffusion in Recycled Aggregate Concrete

2017 ◽  
Vol 15 (01) ◽  
pp. 1750078 ◽  
Author(s):  
Yuching Wu ◽  
Jianzhuang Xiao
Keyword(s):  
Finite Element Method ◽  
Finite Element ◽  
Digital Image ◽  
Recycled Aggregate Concrete ◽  
Recycled Aggregate ◽  
Chloride Diffusion ◽  
Stochastic Finite Element Method ◽  
Stochastic Finite Element ◽  
Aggregate Concrete ◽  
Chloride Diffusivity

In this study, the multiscale stochastic finite element method (MsSFEM) was developed based on a novel digital image kernel to make analysis for chloride diffusion in recycled aggregate concrete (RAC). It is significant to study the chloride diffusivity in RAC, because when RAC was applied in coastal areas, chloride-induced rebar corrosion became a common problem for concrete infrastructures. The MsSFEM was an efficient tool to examine the effect of microscopic randomness of RAC on the chloride diffusivity. Based on the proposed digital image kernel, the Karhunen–Loeve expansion and the polynomial chaos were used in the stochastic homogenization process. To investigate advantages and disadvantages of both generation and application of the proposed digital image kernel, it was compared with many other kernels. The comparisons were made between the method to develop the digital image kernel, which is called the pixel-matrix method, and other methods, and between the application of the kernel and various other kernels. It was shown that the proposed digital image kernel is superior to other kernels in many aspects.

Sign in / Sign up

Export Citation Format

Share Document