Analysis on Structure of Radial-Axial Ring Rolling Experimental Equipment by FEM

2013 ◽  
Vol 690-693 ◽  
pp. 2201-2204
Author(s):  
Yu Long Tan ◽  
Qiang Wang ◽  
Shuang Hui Han ◽  
Fang He
Keyword(s):  
Rolling Process ◽  
Equivalent Strain ◽  
Ring Rolling ◽  
Experimental Equipment ◽  
Design Requirement ◽  
Fem Model ◽  
Rolling System ◽  
Axial Ring ◽  
Successful Design ◽  
Ring Rolling Process

The FEM model of radial-axial ring rolling experimental equipment was established by using ANSYS through processing contact, constraints and loads. The structure stiffness and strength of both radial rolling system and axial rolling system were analyzed based on the analyses of distributions of Von Misese stress, equivalent strain and deformation. It is shown that both the two systems will be within the safe range without any plastic deformation during ring rolling process, and their stiffness is also satisfied with design requirement, which proves the successful design of the radial-axial ring rolling experimental equipment.

Key Technologies for 3D-FE Modeling of Radial-Axial Ring Rolling Process

2008 ◽  
Vol 575-578 ◽  
pp. 367-372 ◽  
Author(s):  
L.G. Guo ◽  
He Yang
Keyword(s):  
Modeling And Simulation ◽  
Optimum Design ◽  
Rolling Process ◽  
Ring Rolling ◽  
Fe Modeling ◽  
Precise Control ◽  
Key Technologies ◽  
Axial Ring ◽  
Forming Characteristics ◽  
Ring Rolling Process

Nowadays, 3D-FE Modeling and simulation is an indispensable method for the optimum design and precise control of radial-axial ring rolling process for its complexities. In this paper, the unique forming characteristics of radial-axial ring rolling have first been summarized, and then some key technologies for 3D-FE modeling of the process have been presented and their solution schemes have been given out, lastly the modeling and simulation of radial-axial ring rolling process have been realized using elastic-plastic dynamic explicit procedure under ABAQUS environment. The work provides an important basis and platform for the future investigations, such as forming mechanism and laws, process optimum design and precise control.

Slip line model for forces estimation in the radial-axial ring rolling process

2018 ◽  
Vol 138-139 ◽  
pp. 17-33 ◽  
Author(s):  
Luca Quagliato ◽  
Guido A. Berti ◽  
Dongwook Kim ◽  
Naksoo Kim
Keyword(s):  
Slip Line ◽  
Rolling Process ◽  
Ring Rolling ◽  
Line Model ◽  
Axial Ring ◽  
Ring Rolling Process

scholarly journals Optimization on cooperative feed strategy for radial–axial ring rolling process of Inco718 alloy by RSM and FEM

2016 ◽  
Vol 29 (3) ◽  
pp. 831-842 ◽  
Author(s):  
Xinglin Zhu ◽  
Dong Liu ◽  
Yanhui Yang ◽  
Yang Hu ◽  
Yong Zheng
Keyword(s):  
Rolling Process ◽  
Ring Rolling ◽  
Axial Ring ◽  
Feed Strategy ◽  
Ring Rolling Process

Effects of Mandrel Structure on Ring Rolling Process for Large-Scale T-Sectioned Ring with Numerical Simulation

2013 ◽  
Vol 690-693 ◽  
pp. 2307-2310
Author(s):  
Ping Zhen Zhou ◽  
Li Wen Zhang ◽  
Sen Dong Gu ◽  
Hong Tao Duan ◽  
Li Hong Teng
Keyword(s):  
Numerical Simulation ◽  
Large Scale ◽  
Rolling Process ◽  
Ring Rolling ◽  
Small Ring ◽  
Rigid Plastic ◽  
Axial Ring ◽  
Folding Defect ◽  
Ring Rolling Process ◽  
Forming Defects

The process parameters including the mandrel structure of radial-axial ring rolling is in close relationship with the forming defects such as over-high axial spread and the folding defect in the connecting part of the big and small ring. In this paper, a 3D rigid-plastic and coupled thermal-mechanical finite-element model (FEM) of radial-axial ring rolling for large-scale T-sectioned ring was developed using commercial software of DEFORM-3D. By changing the chamfer radius of mandrel's work roll, the effects of mandrel structure on the height of axial spread which considerably affects the stability of the ring rolling process were investigated. The folding defect was also simulated. The numerical simulation results showed that with the decrement of the chamfer radius r, the metal increasingly accumulated in the big ring and the axial spread height increased. Consequently, the ring rolling process became unstable. Also, the folding angle augmented.

scholarly journals Optimization and Simulation of Machining Parameters in Radial-axial Ring Rolling Process

2011 ◽  
Vol 4 (3) ◽  
pp. 337
Author(s):  
Shuiyuan Tang ◽  
Jiping Lu ◽  
Hongli Fan ◽  
Ruizhao Du ◽  
Zhonghua Jian ◽  
...  
Keyword(s):  
Rolling Process ◽  
Ring Rolling ◽  
Machining Parameters ◽  
Axial Ring ◽  
Optimization And Simulation ◽  
Ring Rolling Process
Sign in / Sign up

Export Citation Format

Share Document