folding defect
Recently Published Documents


TOTAL DOCUMENTS

44
(FIVE YEARS 3)

H-INDEX

15
(FIVE YEARS 2)

2021 ◽  
Vol 8 ◽  
Author(s):  
Riccardo Montioli ◽  
Giada Sgaravizzi ◽  
Maria Andrea Desbats ◽  
Silvia Grottelli ◽  
Carla Borri Voltattorni ◽  
...  

The deficit of human ornithine aminotransferase (hOAT) is responsible for gyrate atrophy (GA), a rare recessive inherited disorder. Although more than 60 disease-associated mutations have been identified to date, the molecular mechanisms explaining how each mutation leads to the deficit of OAT are mostly unknown. To fill this gap, we considered six representative missense mutations present in homozygous patients concerning residues spread over the hOAT structure. E. coli expression, spectroscopic, kinetic and bioinformatic analyses, reveal that the R154L and G237D mutations induce a catalytic more than a folding defect, the Q90E and R271K mutations mainly impact folding efficiency, while the E318K and C394Y mutations give rise to both folding and catalytic defects. In a human cellular model of disease folding-defective variants, although at a different extent, display reduced protein levels and/or specific activity, due to increased aggregation and/or degradation propensity. The supplementation with Vitamin B6, to mimic a treatment strategy available for GA patients, does not significantly improve the expression/activity of folding-defective variants, in contrast with the clinical responsiveness of patients bearing the E318K mutation. Thus, we speculate that the action of vitamin B6 could be also independent of hOAT. Overall, these data represent a further effort toward a comprehensive analysis of GA pathogenesis at molecular and cellular level, with important relapses for the improvement of genotype/phenotype correlations and the development of novel treatments.


Cells ◽  
2019 ◽  
Vol 8 (4) ◽  
pp. 353 ◽  
Author(s):  
João D. Santos ◽  
Sara Canato ◽  
Ana S. Carvalho ◽  
Hugo M. Botelho ◽  
Kerman Aloria ◽  
...  

The most common cystic fibrosis-causing mutation (F508del, present in ~85% of CF patients) leads to CFTR misfolding, which is recognized by the endoplasmic reticulum (ER) quality control (ERQC), resulting in ER retention and early degradation. It is known that CFTR exit from the ER is mediated by specific retention/sorting signals that include four arginine-framed tripeptide (AFT) retention motifs and a diacidic (DAD) exit code that controls the interaction with the COPII machinery. Here, we aim at obtaining a global view of the protein interactors that regulate CFTR exit from the ER. We used mass spectrometry-based interaction proteomics and bioinformatics analyses to identify and characterize proteins interacting with selected CFTR peptide motifs or full-length CFTR variants retained or bypassing these ERQC checkpoints. We conclude that these ERQC trafficking checkpoints rely on fundamental players in the secretory pathway, detecting key components of the protein folding machinery associated with the AFT recognition and of the trafficking machinery recognizing the diacidic code. Furthermore, a greater similarity in terms of interacting proteins is observed for variants sharing the same folding defect over those reaching the same cellular location, evidencing that folding status is dominant over ER escape in shaping the CFTR interactome.


2019 ◽  
Vol 39 ◽  
pp. 181-191 ◽  
Author(s):  
P.F. Gao ◽  
M.Y. Fei ◽  
X.G. Yan ◽  
S.B. Wang ◽  
Y.K. Li ◽  
...  
Keyword(s):  

2018 ◽  
Vol 200 (19) ◽  
Author(s):  
Imène Kouidmi ◽  
Laura Alvarez ◽  
Jean François Collet ◽  
Felipe Cava ◽  
Catherine Paradis-Bleau

ABSTRACT Peptidoglycan (PG) is the main structural component of bacterial envelopes. It protects bacterial cells against variations in osmotic pressure and cell lysis. The newly discovered Escherichia coli factor ElyC has been shown to be important for peptidoglycan biosynthesis at low temperatures. PG production in ΔelyC mutant cells is totally blocked after a few hours of growth at 21°C, triggering cell lysis. In this study, we took a candidate approach to identify genetic suppressors of the ΔelyC mutant cell lysis phenotype. We identified the periplasmic proteins DsbG and Spy as multicopy suppressors and showed that their overproduction restores PG biosynthesis in the ΔelyC mutant. Interestingly, we found that DsbG acts by a novel mechanism, which is independent of its known reductase activity and substrates. DsbG, like Spy, acts as a chaperone to reduce the amounts of protein aggregates in the envelopes of ΔelyC cells. In fact, we found that the amount of protein aggregates was greater in the ΔelyC mutant than in the wild type. Taken together, our results show a protein-folding defect in the envelope compartments of ΔelyC cells that blocks PG production, and they reveal a new physiological activity of DsbG. IMPORTANCE Peptidoglycan biosynthesis is a dynamic and well-controlled pathway. The molecular assembly of PG and the regulatory pathways ensuring its maintenance are still not well understood. Here we studied the newly discovered Escherichia coli factor ElyC, which is important for PG biosynthesis at low temperatures. We revealed an important protein-folding defect in the ΔelyC mutant and showed that overproduction of the periplasmic chaperone DsbG or Spy was sufficient to correct the protein-folding defect and restore PG biosynthesis. These results show that the PG defect in the absence of ElyC is caused, at least in part, by a protein-folding problem in the cell envelope. Furthermore, we showed, for the first time, that the periplasmic protein DsbG has chaperone activity in vivo.


2018 ◽  
Vol 154 (6) ◽  
pp. S-193
Author(s):  
Kavisha Arora ◽  
Marco Kessler ◽  
Gerhard Hannig ◽  
Anjaparavanda P. Naren

2018 ◽  
Vol 115 (3) ◽  
pp. 519-524 ◽  
Author(s):  
Xiang Ye ◽  
Leland Mayne ◽  
Zhong-yuan Kan ◽  
S. Walter Englander

We used hydrogen exchange–mass spectrometry (HX MS) and fluorescence to compare the folding of maltose binding protein (MBP) in free solution and in the GroEL/ES cavity. Upon refolding, MBP initially collapses into a dynamic molten globule-like ensemble, then forms an obligatory on-pathway native-like folding intermediate (1.2 seconds) that brings together sequentially remote segments and then folds globally after a long delay (30 seconds). A single valine to glycine mutation imposes a definable folding defect, slows early intermediate formation by 20-fold, and therefore subsequent global folding by approximately twofold. Simple encapsulation within GroEL repairs the folding defect and reestablishes fast folding, with or without ATP-driven cycling. Further examination exposes the structural mechanism. The early folding intermediate is stabilized by an organized cluster of 24 hydrophobic side chains. The cluster preexists in the collapsed ensemble before the H-bond formation seen by HX MS. The V9G mutation slows folding by disrupting the preintermediate cluster. GroEL restores wild-type folding rates by restabilizing the preintermediate, perhaps by a nonspecific equilibrium compression effect within its tightly confining central cavity. These results reveal an active GroEL function other than previously proposed mechanisms, suggesting that GroEL possesses different functionalities that are able to relieve different folding problems. The discovery of the preintermediate, its mutational destabilization, and its restoration by GroEL encapsulation was made possible by the measurement of a previously unexpected type of low-level HX protection, apparently not dependent on H-bonding, that may be characteristic of proteins in confined spaces.


2016 ◽  
Vol 878 ◽  
pp. 28-32 ◽  
Author(s):  
Xin Hai Zhao ◽  
Dan Dan Liu ◽  
Xing Hui Wang ◽  
Xiang Hong Wu

In this paper, the optimization of the parameters of the isothermal forging technology to form spur bevel gear was studied. The goal of the optimization is to decrease the forming load during the process. Then, some factors included the ratio of height to diameter of billet, thickness and position of punching recess, deformation temperature and velocity were taken as the optimization values and the orthogonal experimental method was employed to carried out the optimization. After the optimization, a set of optimum technology parameters were obtained. The result demonstrates that the precise spur bevel gear can be formed with less forming load and without causing under-filling and folding defect by using the isothermal forging and choosing suitable parameter, which provides reference to form the spur bevel gear.


Sign in / Sign up

Export Citation Format

Share Document