The Application of Multistage Fuzzy Comprehensive Evaluation Mathematics Method for the Analysis of Determining the Remaining Oil in Ultra-High Water-Cut Oilfield

2014 ◽  
Vol 926-930 ◽  
pp. 4429-4432 ◽  
Author(s):  
Chun Mei You ◽  
Jia Chun Wang ◽  
Xiao Jun Sun ◽  
Xian Hu Lv ◽  
Shao Ming Song
Keyword(s):  
Evaluation Method ◽  
Comprehensive Evaluation ◽  
Fuzzy Comprehensive Evaluation ◽  
High Water ◽  
Water Flooding ◽  
Oil Distribution ◽  
Remaining Oil ◽  
High Water Cut ◽  
Water Cut ◽  
Mathematics Method

After the water flooding sandstone oilfield entering the ultra-high water-cut developing phase, the remaining oil distribution has become increasingly fragmented, how to quantitative distinguish the remaining oil potential is the key to influence oilfield development, using multilevel fuzzy comprehensive evaluation mathematics method, comprehensive analyzed the classification reservoir’s producing conditions during the ultra-high water-cut developing phase, established a quantitative evaluation method from geological and develop factors, solved the problem of analyzing remaining oil in deferent kinds of reservoirs, realized the quantitative characterization of remaining oil in the ultra-high water-cut oilfield.

scholarly journals Microscopic Determination of Remaining Oil Distribution in Sandstones With Different Permeability Scales Using Computed Tomography Scanning

2019 ◽  
Vol 141 (9) ◽  
Author(s):  
Yongfei Yang ◽  
Haiyuan Yang ◽  
Liu Tao ◽  
Jun Yao ◽  
Wendong Wang ◽  
...  
Keyword(s):  
Distribution Pattern ◽  
Oil Recovery ◽  
Distribution Patterns ◽  
High Water ◽  
Water Flooding ◽  
Oil Distribution ◽  
Computed Tomography Scanning ◽  
Remaining Oil ◽  
High Water Cut ◽  
Water Cut

To investigate the characteristics of oil distribution in porous media systems during a high water cut stage, sandstones with different permeability scales of 53.63 × 10−3 μm2 and 108.11 × 10−3 μm2 were imaged under a resolution of 4.12 μm during a water flooding process using X-ray tomography. Based on the cluster-size distribution of oil segmented from the tomography images and through classification using the shape factor and Euler number, the transformation of the oil distribution pattern in different injection stages was studied for samples with different pore structures. In general, the distribution patterns of an oil cluster continuously change during water injection. Large connected oil clusters break off into smaller segments. The sandstone with a higher permeability (108.11 × 10−3 μm2) shows the larger change in distribution pattern, and the remaining oil is trapped in the pores with a radius of approximately 7–12 μm. Meanwhile, some disconnected clusters merge together and lead to a re-connection during the high water cut period. However, the pore structure becomes compact and complex, the residual nonwetting phase becomes static and is difficult to move; and thus, all distribution patterns coexist during the entire displacement process and mainly distribute in pores with a radius of 8–12 μm. For the pore-scale entrapment characteristics of the oil phase during a high water cut period, different enhance oil recovery (EOR) methods should be considered in sandstones correspondent to each permeability scale.

Study on 3D Fine Structural Modeling of Typical Block in Sanan Oilfield, Daqing

2014 ◽  
Vol 628 ◽  
pp. 348-353
Author(s):  
Tao Li ◽  
Zian Li ◽  
Jiang Wang
Keyword(s):  
Structural Model ◽  
3D Structure ◽  
High Water ◽  
Oil Distribution ◽  
Remaining Oil ◽  
Modeling Software ◽  
Remaining Oil Distribution ◽  
High Water Cut ◽  
Reservoir Description ◽  
Water Cut

Sanan oilfield has entered late stage of high water cut development. It urgently needs accurate prediction of remaining oil distribution. But previous studies on 3D structure were far could not meet the requirements of fine reservoir description. This paper applied RMS, a piece of excellent geological modeling software establishing the 3D fine structural model of typical block in Sanan oilfield on the bases of 3D fine seismic structural interpretation data. It included the 28 faults’ model, 11 horizons’ model and the structural model. And then measured and analyzed the faults elements data. Based on abundant geologic data, well data and seismic data of the block, this structural model reproduced the fine seismic interpretation results accurately. It was really fine enough to meet the requirements of the fine reservoir description. This research solved the problem that traditional modeling techniques could not handle complex cutting relationship of faults’ model. It laid a solid foundation for reservoir numerical simulation and remaining oil distribution prediction.

scholarly journals Qualitative interpretation method of water flooding in independent off surface reservoir of Lamadian Oilfield

2020 ◽  
Vol 165 ◽  
pp. 03039
Author(s):  
Li Hong Cui
Keyword(s):  
Outer Surface ◽  
High Water ◽  
Water Flooding ◽  
Qualitative Interpretation ◽  
Remaining Oil ◽  
High Water Cut ◽  
Water Cut ◽  
Surface Reservoir ◽  
Interpretation Method ◽  
Thick Layers

With Lamadian Oilfield entering the late stage of ultra-high water cut, the number of thick layers in water drive is becoming less and less, so it is imperative to study the remaining oil in thin difference reservoir. For the thin difference reservoir, the independent off surface reservoir has naturally become an important research object [1]. It is necessary to study the waterflooding condition of the independent outer surface reservoirs to find out the producing law of the thin difference reservoirs at present. In this paper, we mainly use thewater washing data of independent outer surface reservoir and core data of sidewall of coring well to find the water flooding interpretation law of independent outer surface reservoir.This paper focuses on the analysis of the characteristics of the electric logging curve of the independent off surface reservoir after water flooding, and summarizes a set of qualitative interpretation methods suitable for the independent off surface reservoir of Lamadian oilfield. This method can improve the accuracy of waterflooded layer interpretation and meet the needs of remaining oil potential tapping in the later stage of ultra-high water cut.

scholarly journals Techniques for improving the water-flooding of oil fields during the high water-cut stage

2019 ◽  
Vol 74 ◽  
pp. 69 ◽  
Author(s):  
Kuiqian Ma ◽  
Ao Li ◽  
Shuhao Guo ◽  
Jieqiong Pang ◽  
Yongchao Xue ◽  
...  
Keyword(s):  
Oil Recovery ◽  
Water Injection ◽  
Reduction Rate ◽  
High Water ◽  
Water Flooding ◽  
Variable Intensity ◽  
Remaining Oil ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut

The multi-layer co-exploitation method is often used in offshore oilfields because of the large spacing between the injection and production wells. As oilfields gradually enter the high water-cut stage, the contradiction between the horizontal and vertical directions becomes more prominent, and the distribution of the remaining oil is more complex. Oilfields are facing unprecedented challenges in further enhancing oil recovery. Using oilfield A, which is in the high water-cut stage, as the research object, we compiled a detailed description of the remaining oil during the high water-cut stage using the information collected during the comprehensive adjustment and infilling of the oilfield. In addition various techniques for tapping the potential reservoir, stabilizing the oil, and controlling the water were investigated. A set of key techniques for the continuous improvement of the efficiency of water injection after comprehensive adjustment of high water-cut fields was generated. Based on the determined configuration of the offshore deltaic reservoir, a set of detailed descriptive methods and tapping technology for extracting the remaining oil in the offshore high water-cut oilfield after comprehensive adjustment was established. By considering the equilibrium displacement and using a new quantitative characterization method that includes displacement, a new technique for determining the quantity of water that needs to be injected into a stratified injection well during the high water-cut stage was established. Based on the principle of flow field intensity reconfiguration, a linear, variable-intensity, alternating injection and withdrawal technique was proposed. With the application of this series of techniques, the increase in the water content was controlled to within 1%, the natural reduction rate was controlled to within 9%, and the production increased by 1.060 × 107 m3.

The Research of Remaining Oil Distribution in High Water Cut Oilfield

2012 ◽  
Vol 591-593 ◽  
pp. 2555-2558
Author(s):  
Cheng Fu ◽  
Bin Huang
Keyword(s):  
High Water ◽  
Water Flooding ◽  
Production Plant ◽  
3D Geological Modeling ◽  
Oil Distribution ◽  
High Efficient ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut ◽  
Oilfield Development

The western South-eight block which is located in the comprehensive tap demonstration area of NO.2 oil production plant, has already gone through three years’ fine development. The production has been stable, the rising amplitude of comprehensive water cut has been small, and the natural decline rate has been controlled effectively. But with the deep development, this block has gone into the late ultra-high water cut stage. To maintain high efficient water flooding development is more and more difficult, therefore fine 3D geological modeling and reservoir numerical simulation work have been carried out. And some practical residual oil saturation diagrams have been put forward finally towards this block, which has provided a reliable basis for the next oilfield development.

Remaining Oil Distribution and Development of Chao64 Block in Chaoyanggou Oilfield

2014 ◽  
Vol 522-524 ◽  
pp. 1262-1265
Author(s):  
Qi Xu
Keyword(s):  
High Water ◽  
High Position ◽  
Control Factors ◽  
Oil Distribution ◽  
Body Development ◽  
Sand Body ◽  
Remaining Oil ◽  
High Water Cut ◽  
Water Cut ◽  
High Structure

Effective comprehensive logging, seismic fine prediction of structure and sand body, analysis of remaining oil controlling factors and distribution, is the precondition for remaining oil development in high water cut oilfield during the middle and later periods of the development. Based on combination of fine well and seismic fine structure and sand body prediction research, this article analyzes main control factors and distribution regularity of remaining oil in the block. Through the analysis, the structure and reservoir heterogeneity affected the distribution of remaining oil in the Fuyu oil layer in the Chao 64 block, the distribution of remaining oil in the plane, interlayer and layer showed different distribution characteristic. The remaining oil mainly distributed in the reverse faulting footwall high structure position, injection production faultiness part, and micro range structural high position, inter well isolated sand body development area.

The Analysis of Remaining Oil in High Water Cut Stage

2013 ◽  
Vol 274 ◽  
pp. 675-678
Author(s):  
Cheng Fu ◽  
Bin Huang
Keyword(s):  
Characteristic Curve ◽  
Material Balance ◽  
High Water ◽  
Oil Distribution ◽  
Remaining Oil ◽  
Remaining Oil Distribution ◽  
High Water Cut Stage ◽  
High Water Cut ◽  
Water Cut ◽  
Material Balance Method

The remaining oil distribution is very complex and the difficulty in tapping measures is more and more big when the west block of South-eight area has gone into the ultra-high water cut stage. So the remaining oil distribution in 109 units has been comprehensively studied on the condition that the composite water cut reaches 9.06% by establishing reservoir geologic model and proceeding reservoir numerical simulation according to recent tapping measures and remaining oil analysis experience in the process of adjusting scheme. And combined with some reservoir engineering methods such as: waterflooding characteristic curve and material balance method, obvious effects has been obtained in this research.

Sign in / Sign up

Export Citation Format

Share Document