Influence of the Microstructure on the U1-yAmyO2-x (y= 0.1; 0.15) Pellet Macroscopic Swelling

2010 ◽  
Vol 73 ◽  
pp. 104-108 ◽  
Author(s):  
Damien Prieur ◽  
Aurélien Jankowiak ◽  
Caroline Leorier ◽  
Nathalie Herlet ◽  
Louis Donnet ◽  
...  
Keyword(s):  
Experimental Data ◽  
Powder Metallurgy ◽  
Room Temperature ◽  
Powder Metallurgy Process ◽  
Metallurgy Process ◽  
Α Particles

This work is devoted to the study of the geometrical stability in time of UyAm1-yO2-x pellet due to self-irradiation at room temperature. Dense and tailored porosity U1-yAmyO2-x (y=0.10; 0.15) compounds were fabricated by a powder metallurgy process. Up to 3.4.1017 α particles/g, an increase in the diameter of 0.9% was observed for the dense compounds while for the tailored porosity material a diameter increase of 0.4% was observed. Swelling laws have been established from the experimental data.

Corrigendum to “Abnormal twinning behaviors in ZK60 alloy by powder metallurgy process” [Mater. Sci. Eng., A 779 (2020) 139145]

2021 ◽  
Vol 805 ◽  
pp. 140799
Author(s):  
Lei Zhao ◽  
Mengna Zhang ◽  
Zihan Yu ◽  
Guojun Ma ◽  
Bin Ma ◽  
...  
Keyword(s):  
Powder Metallurgy ◽  
Powder Metallurgy Process ◽  
Zk60 Alloy ◽  
Metallurgy Process

Compressive strength and energy absorption of magnesium foam with REE by powder metallurgy process

2020 ◽  
Author(s):  
Sivashankari Palaniswamy ◽  
Krishnamoorthy Arunagiri ◽  
Prakash Subramaniam
Keyword(s):  
Compressive Strength ◽  
Powder Metallurgy ◽  
Energy Absorption ◽  
Powder Metallurgy Process ◽  
Metallurgy Process

scholarly journals Kinetic Analysis of Solid-State Formation of Mg2Si by Powder Metallurgy Process

2011 ◽  
Vol 37 (6) ◽  
pp. 321-325
Author(s):  
Bin SUN ◽  
Shufeng LI ◽  
Hisashi IMAI ◽  
Junko UMEDA ◽  
Katsuyoshi KONDOH
Keyword(s):  
Powder Metallurgy ◽  
Solid State ◽  
Kinetic Analysis ◽  
State Formation ◽  
Powder Metallurgy Process ◽  
Metallurgy Process

Analysis of powder metallurgy process parameters for mechanical properties of sintered Fe–Cr–Mo alloy steel

2016 ◽  
Vol 32 (5) ◽  
pp. 537-541 ◽  
Author(s):  
Sandeep Chauhan ◽  
Vikas Verma ◽  
Ujjwal Prakash ◽  
P. C. Tewari ◽  
Dinesh Khanduja
Keyword(s):  
Mechanical Properties ◽  
Powder Metallurgy ◽  
Alloy Steel ◽  
Process Parameters ◽  
Powder Metallurgy Process ◽  
Metallurgy Process

scholarly journals Effect of Thermo-Mechanical Treatment on the Microstructure and Tensile Properties of the Fe-22Cr-5Al-0.1Y Alloy

Materials ◽  
2021 ◽  
Vol 14 (19) ◽  
pp. 5696
Author(s):  
Hongyan Che ◽  
Yazhong Zhai ◽  
Yingjie Yan ◽  
Yongqing Chen ◽  
Wei Qin ◽  
...  
Keyword(s):  
Powder Metallurgy ◽  
Mechanical Treatment ◽  
Oxide Dispersion Strengthened ◽  
Fusion Reactors ◽  
Oxide Dispersion ◽  
Grain Sizes ◽  
Powder Metallurgy Process ◽  
The Matrix ◽  
Thermo Mechanical Treatment ◽  
Metallurgy Process

Oxide dispersion strengthened ferritic steel is considered an important structural material in fusion reactors due to its excellent resistance to radiation and oxidation. Fine and dispersed oxides can be introduced into the matrix via the powder metallurgy process. In the present study, large grain sizes and prior particle boundaries (PPBs) formed in the FeCrAlY alloy prepared via powder metallurgy. Thermo-mechanical treatment was conducted on the FeCrAlY alloy. Results showed that microstructure was optimized: the average grain diameter decreased, the PPBs disappeared, and the distribution of oxides dispersed. Both ultimate tensile strength and elongation improved, especially the average elongation increased from 0.5% to 23%.

Sign in / Sign up

Export Citation Format

Share Document