Optimization of the Frame and Performance Analysis of Solar Modules Based on Ansys Workbench and Solidworks

2016 ◽  
Vol 693 ◽  
pp. 169-173
Author(s):  
Wei Hua Wei ◽  
Ya Nan Zhu ◽  
Tong Ming Xue ◽  
Si Yuan Xie ◽  
Cheng Rong Yuan ◽  
...  
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Defect Detection ◽  
Three Dimensional ◽  
Analysis Software ◽  
Element Analysis ◽  
Load Tests ◽  
And Performance ◽  
Factory Laboratory ◽  
Ansys Workbench

Taking advantage of three-dimensional software Solidworks to model for solar modules and also using finite element analysis software Ansysworkbench to conduct the stress analysis and strength check of modules, to analyze the deformation of modules under certain loading conditions, to conduct load tests and defect detection (EL experiments) and to optimize encapsulation with aluminum frame combined with the factory laboratory. The results show that: the modules have no crack and other defects and their power attenuation does not exceed the specified value after the 2.0mm thickness aluminum frame was reduced to 1.7mm.

The Finite-Element Analysis of the Main Frame of the Airborne Photoelectric Platform

2012 ◽  
Vol 562-564 ◽  
pp. 1943-1946
Author(s):  
Yong Hu ◽  
Jin Gan Song ◽  
Qing Zou ◽  
Ke Zhu ◽  
Xiao Long Wang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Weak Links ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Overall Performance ◽  
Sufficient Strength ◽  
Ansys Workbench ◽  
Main Frame

Because both of the volume and the weight of the photoelectric platform are small, the structure of two frames and two axes is used in the photoelectric platform. As the key component of the photoelectric platform, the main frame should have sufficient strength and rigidity. In order to achieve this object, three-dimensional entity model of the main frame is established using CATIA software. Then the finite-element analysis of the model is finished with ANSYS Workbench. Based on the analysis results, the weak links of the main frame is found. Then these links are improved and the main frame is analyzed again. After improving the structure, the results of the finite-element analysis show that the main frame meets the requirements of design and has perfect overall performance.

The Simulation of Rolling Process of Wire with Y-Type Roller

2014 ◽  
Vol 602-605 ◽  
pp. 709-712
Author(s):  
Jin Hong Ma ◽  
Bin Tao ◽  
Xiao Han Yao
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Rolling Mill ◽  
Three Dimensional ◽  
Rolling Process ◽  
Stress And Strain ◽  
Analysis Software ◽  
Element Analysis ◽  
The Finite Element Analysis ◽  
Three Dimensional Models

Y-Type rolling mill with three roller is a new kind of wire mill.The three-dimensional models of rolling are established by Pro/E. Based on the finite element analysis software ANSYS/LS-DYNA, the rolling process of wire by Y-type rollers is simulated. The rolling piece movement is analysed. Stress and strain of Y-type roller are also analysed.

Based on Pro/E and Ansys'Finite Element Analysis of Conveying Roller

2012 ◽  
Vol 271-272 ◽  
pp. 797-800
Author(s):  
Chan Juan Chen ◽  
Zhou Wen
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Three Dimensional ◽  
Local Strain ◽  
Analysis Software ◽  
Roller Conveyor ◽  
Element Analysis ◽  
Three Dimensional Modeling ◽  
Dimensional Modeling ◽  
Modeling Software

In order to study conveying roller force and improve its mechanical properties, we use three-dimensional modeling software Pro/E to build the solid model of the Apple box delivery device’s conveying roller. Using finite element analysis software Ansys to analyze conveying roller’s bending stress, we can get images of local strain and displacement contours .Contrasting with factory’s broken roller conveyor, we can find that: through the establishment of appropriate boundary conditions, Ansys can accurate finite element analysis, and provide the basis for the conveying roller structure improvements.

Finite Element Analysis for Rocker Arms of Vertical Roller Mill on the ANSYS Workbench

2011 ◽  
Vol 230-232 ◽  
pp. 824-828
Author(s):  
Kun Cheng
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Safety Factor ◽  
Equivalent Stress ◽  
Three Dimensional ◽  
Element Analysis ◽  
Roller Mill ◽  
Application Requirements ◽  
Vertical Roller ◽  
Ansys Workbench

Based on illuminating the structure,working principle and force analysis of vertical roller mill, the finite element analysis of rocker arms is carried out on ANSYS Workbench (AWE) platform. First of all, the structure of rocker arms and grinding roll components are simplified,then the three-dimensional entity model and meshing model of vertical roller mill both are established. Secondly, the material attribute,contact type,loads and constraints of rocker arms and grinding roll components are defined,and the total deformation, equivalent stress and safety factor of rocker arms are gained after numerical calculation.Results show that the up rocker could meet basically application requirements for its uniform stress distribution.But the lower rocker cannot meet the strength requirements for its low safety factor,and it is necessary to optimize the structure for improving the safety coefficient of lower rocker.

Cleft Lip Surgery Program Scheduled Based on Finite Element Analysis

2012 ◽  
Vol 522 ◽  
pp. 874-879
Author(s):  
Wen Jun Qi ◽  
Tang Min Zhao ◽  
Li Hu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Cleft Lip ◽  
Analysis Software ◽  
Element Analysis ◽  
Scientific Analysis ◽  
The Finite Element Analysis ◽  
Ansys Workbench

In the paper, the force is analyzed and compared using the finite element analysis software ANSYS Workbench for the same patient with cleft lip using different programs, pre-surgery program is scheduled according to the results, the program will be determined by the surgery depends mainly on the physician's experience into a scientific analysis for cleft lip surgery, a way is studied to determine the scientific and reasonable cleft lip surgery program.

Based on ANSYS the Static Strength Analysis of Twin Tripod Sliding Universal Joints

2012 ◽  
Vol 510 ◽  
pp. 520-523
Author(s):  
De Gong Chang ◽  
Min Min Du ◽  
Zhao Dong Liu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Static Strength ◽  
Strength Analysis ◽  
Analysis Software ◽  
Element Analysis ◽  
Ansys Workbench ◽  
Universal Joints

Using finite element analysis software ANSYS Workbench module to do statics analysis of the Improved Twin Tripod Sliding Universal Joints ,it can get the middle pole of the trigeminal direction stress cloud pictures, and the greatest stress place after analysis, and can provide the basis for further improved structure coupling.

Optimization Design in the Driving Gear Wheel Axle of Triangular Rubber Track Conversion

2011 ◽  
Vol 308-310 ◽  
pp. 513-516 ◽  
Author(s):  
Zhen Ning Hu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Optimization Design ◽  
Three Dimensional ◽  
Gear Wheel ◽  
Three Dimensional Model ◽  
Element Analysis ◽  
Construction Machinery ◽  
The Finite Element Analysis ◽  
Ansys Workbench

The heavy triangular rubber track conversion for the construction machinery has existed the disadvantage for weight oversized. The effective reduced triangular rubber track conversion's weight is essential in the engineering design. This article established one kind of triangular rubber track conversion driving gear wheel axle's three-dimensional model, integrated dynamics analysis has carried on the finite element analysis to it, based on this and carried on the size using Ansys Workbench to optimize for its most superior structure size, finally to optimized the result to carry on the finite element analysis once more. The result contrast indicated that at maintains under the wheel axle stress level basic invariable premise, after the optimized wheel axle weight reduces greatly, enhanced track wheel's performance effectively.

Finite Element Modal Analysis of Whole Structure of Spherical Grinder

2013 ◽  
Vol 677 ◽  
pp. 273-277
Author(s):  
Xiao Xin Gong ◽  
Qiang Lu
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Modal Analysis ◽  
Element Model ◽  
Analysis Software ◽  
Element Analysis ◽  
Improvement Measure ◽  
The Finite Element Analysis ◽  
Improved Design ◽  
Ansys Workbench

In order to analyze vibration characteristics of whole structure of the spherical grinder, the finite element analysis software is applied to finite element modal analysis of the structure. 3D model of spherical grinder is established by Pro/ENGINEER software. Finite element model of spherical grinder is established in the finite element analysis software ANSYS Workbench. The previous 6-order inherent frequencies and the corresponding vibration modes are obtained through the finite element calculation. According to the vibration intensity distribution, the corresponding improvement measure is put forward. It provides theoretical basis for dynamic analysis and improved design of spherical grinder.

Seismic Analysis of Hoist Using ANSYS Workbench

2014 ◽  
Vol 651-653 ◽  
pp. 992-995
Author(s):  
Liang Liu ◽  
Zhan Jun Wang
Keyword(s):  
Finite Element Analysis ◽  
Finite Element ◽  
Power Plant ◽  
Nuclear Power ◽  
Model Building ◽  
Seismic Analysis ◽  
Base Plate ◽  
Analysis Software ◽  
Element Analysis ◽  
Ansys Workbench

In order to verify that the +20m platform hoist for Qinshan Nuclear Power Plant can withstand safe shutdown earthquake (SSE) without any damage, that is during or after SSE, completeness of structure and operation can be ensured, finite element analysis software, ANSYS Workbench is applied to analysis on model building and seismic analysis for the platform hoist (including hoisting mechanism, base plate,drum).

Sign in / Sign up

Export Citation Format

Share Document