Substantiation of the BFZP Technology Application at the Object YUS11 of the Fainsk Oil Field

2018 ◽  
Vol 785 ◽  
pp. 46-51
Author(s):  
Ivan Nesterov ◽  
Marsel Kadyrov ◽  
Andrey Ponomarev ◽  
Denis Drugov ◽  
Mikhail Zavatskij

Bottomhole formation zone processing (BFZP) is performed at all phases of oil field development to restore and improve the filtration-capacity properties of the bottomhole formation zone to improve the oil yield. The choice of the BFZP technology is made basing on the study of the reasons for low well yield with account for the collector properties of productive sediments and rheological characteristics of the formation fluids, as well as a special geologic-geophysical and development-hydrodynamic study for the assessment of the porosity and permeability properties of BFZ. The research objective is to develop the criteria and assess the conditions for the application of bottomhole formation zone processing technologies for the upper Jurassic formations. Analysis of the results of laboratory and industrial research allowed offering the most efficient technologies for the influence on the upper Jurassic deposits.

2021 ◽  
Author(s):  
Vil Syrtlanov ◽  
Yury Golovatskiy ◽  
Ivan Ishimov

Abstract In this paper the simplified way is proposed for predicting the dynamics of liquid production and estimating the parameters of the oil reservoir using diagnostic curves, which are a generalization of analytical approaches, partially compared with the results of calculations on 3D simulation models and with actual well production data.


2021 ◽  
Author(s):  
Khidir Mansum Ibragimov ◽  
Nahide Ismat Huseinova ◽  
Aliabas Alipasha Gadzhiev

Abstract For controlling the oil field development proposed an economically efficient express calculation and visualization method of the hydrodynamic parameters current values distribution in the productive formation. The presented report shows the results of applying this technique for determining the injected water propagation direction into the productive formation (X horizon) at the «Neft Dashlary» field. Based on the calculated results, the current distribution of the injected water was visualized in the selected section of the formation. High accuracy of the calculation was confirmed by comparing obtained results with the results of a simultaneous tracer study conducted in the field conditions. During tracer studies it was tested a new tracer material, more effective than its analogs. According to laboratory and experimental studies, the addition of 0.003% of this indicator substance to the volume of injected water is the optimal amount for its recognition in the well's product. At the allocated area of the "Neft Dashlari" field, the benefits from the use of the calculation method amounted to 62.9 thousand manats. Based on the obtained satisfying results of the new method for calculating hydrodynamic parameters and the use of a tracer indicator application at the «Neft Dashlary» oilfield, it is recommended to apply these developments in other oil and gas fields for mass diagnostic of the reservoir fluid distribution in a selected area of productive formations.


Sign in / Sign up

Export Citation Format

Share Document