Numerical Simulation of Paraffin Melting Process in an Inclined Channel

2021 ◽  
Vol 896 ◽  
pp. 111-116
Author(s):  
Yan Li ◽  
Guo You You ◽  
Zhu Qunzhi
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Early Stage ◽  
Liquid Paraffin ◽  
Convection Heat Transfer ◽  
Melting Process ◽  
Heat Transfer Mode ◽  
Dominant Position ◽  
Transfer Mode ◽  
Higher Temperature

Numerical simulation of the melting of paraffin in the inclined straight channel shows that the melting speed of paraffin is faster in the early stage and gradually slows down in the later stage. It is found that heat conduction is the main heat transfer mode in the early stage of paraffin melting. With the increasing number of liquid paraffin, natural convection occurs in the liquid paraffin. The liquid paraffin with higher temperature flows upward due to the effect of buoyance and lift, and convection heat transfer gradually increases and takes the dominant position in the melting process.

scholarly journals Thermophysical Characterization and Numerical Investigation of Three Paraffin Waxes as Latent Heat Storage Materials

2019 ◽  
Author(s):  
Manel Kraiem ◽  
Mustapha Karkri ◽  
Sassi Ben Nasrallah ◽  
patrick sobolciak ◽  
Magali Fois ◽  
...  
Keyword(s):  
Heat Transfer ◽  
Natural Convection ◽  
Rayleigh Number ◽  
Heat Storage ◽  
Numerical Study ◽  
Melting Process ◽  
Heat Transfer Mode ◽  
Transfer Mode ◽  
Paraffin Waxes ◽  
Thermophysical Characterization

Thermophysical characterization of three paraffin waxes (RT27, RT21 and RT35HC) is carried out in this study using DSC, TGA and transient plane source technics. Then, a numerical study of their melting in a rectangular enclosure is examined. The enthalpy-porosity approach is used to formulate this problem in order to understand the heat transfer mechanism during the melting process. The analysis of the solid-liquid interface shape, the temperature field shows that the conduction is the dominant heat transfer mode in the beginning of the melting process. It is followed by a transition regime and the natural convection becomes the dominant heat transfer mode. The effects of the Rayleigh number and the aspect ratio of the enclosure on the melting phenomenon are studied and it is found that the intensity of the natural convection increases as the Rayleigh number is higher and the aspect ratio is smaller. In the second part of the numerical study, a comparison of the performance of paraffins waxes during the melting process is conducted. Results reveals that from a kinetically RT21 is the most performant but in term of heat storage capacity, it was inferred that RT35HC is the most efficient PCM.

Numerical Simulation Model of Electrothermal De-Icing Process on Composite Substrate

2020 ◽  
Author(s):  
Xiaofeng Guo ◽  
Zhiqiang Guo ◽  
Qian Yang ◽  
Wei Dong
Keyword(s):  
Heat Transfer ◽  
Numerical Simulation ◽  
Thermal Properties ◽  
Temperature Distribution ◽  
Simulation Model ◽  
Melting Process ◽  
Ice Melting ◽  
Melted Zone ◽  
Composite Substrate ◽  
Cfrp Composite

Abstract A numerical simulation model of electrothermal de-icing process on carbon fiber reinforced polymer (CFRP) composite is conducted to study the effect of thermal properties of the substrate on the ice melting process. A novel melting model which is based on the enthalpy-porosity method is applied to study the transient ice melting process and heat transfer of the de-icing sys-tem. Multi-layered electrothermal de-icing systems including composites with different fiber orientation are used to analyze the effects of orthotropic heat conductivity of the CFRP composite on the ice melting process and heat transfer. Movement of the ice-water interface, the melted zone thickness and the melted zone area on CFRP composite are investigated on the three-dimensional electrothermal de-icing unit. The effects of thermal properties of substrate on the temperature distribution of the ice-airfoil interface are analyzed. The computational results show that the thermal properties of substrates affect the temperature on the ice-airfoil interface, the temperature distribution in the substrate, ice melting area, ice melting rate and ice melting volume significantly. The time that ice starts to melt on the CFRP composite substrate is earlier than that on the metal substrate. However, it takes more time for the ice to melt completely on the ice-CFRP interface than that on the ice-metal inter-face. The orthotropic heat conductivity of CFRP composite results in strong directivity of the melting area on the ice-CFRP in-terface. A ratio parameter is defined to represent the matching degree of substrate materials and geometry model of de-icing system. The simulation model can be applied to study electrothermal de-icing system of nacelle inlet and airfoil made of composite. The results in present work is also helpful to predict the change of temperature during de-icing process and provide guidelines for the optimizing the electrothermal de-icing system to reduce power consumption according to the fiber structure of composite.

Sign in / Sign up

Export Citation Format

Share Document