Sense Determination of c-Axis Screw Dislocations in 4H-SiC

2008 ◽  
Vol 600-603 ◽  
pp. 297-300 ◽  
Author(s):  
Yi Chen ◽  
Xian Rong Huang ◽  
Govindhan Dhanaraj ◽  
Michael Dudley ◽  
Edward K. Sanchez ◽  
...  
Keyword(s):  
Opposite Sign ◽  
Grazing Incidence ◽  
The Other ◽  
Feature Size ◽  
Screw Dislocations ◽  
Back Reflection ◽  
The Asymmetry ◽  
Dark Contrast ◽  
Line Direction

Grazing-incidence synchrotron topography studies of micropipes (MPs) and closed-core threading screw dislocations (TSDs) have been carried out and the results compared with ray-tracing simulations. Simulations indicate that both MPs and TSDs appear as roughly elliptically shaped white features which are canted to one side or the other of the g-vector depending on the dislocation sense and which have asymmetric perimeters of dark contrast which are greatly enhanced on the side towards which the feature is canted (again depending on the dislocation sense). For MPs, observations are generally consistent with this although the cant of the features is more obviously discerned than the asymmetry in the perimeter contrast. Sense assignment for MPs has been validated using back-reflection reticulography. For TSDs, observation are again generally consistent with the simulations although the smaller feature size and the variability in the line direction of the TSDs make the asymmetry of perimeter contrast a more obvious and reliable way to determine the dislocation sense than the sense of cant. TSD dislocation senses so obtained were validated using back-reflection images of same-sign and opposite-sign pairs.

Studies of c-Axis Threading Screw Dislocations in Hexagonal SiC

2008 ◽  
Vol 1069 ◽  
Author(s):  
Yi Chen ◽  
Xianrong Huang ◽  
Ning Zhang ◽  
Govindhan Dhanaraj ◽  
Edward Sanchez ◽  
...  
Keyword(s):  
Ray Tracing ◽  
Grazing Incidence ◽  
Screw Dislocations ◽  
Burgers Vector ◽  
X Ray ◽  
Back Reflection ◽  
Partial Dislocations ◽  
Ray Tracing Simulation ◽  
Vector Magnitude

ABSTRACTIn our study, closed-core threading screw dislocations and micropipes were studied using synchrotron x-ray topography of various geometries. The Burgers vector magnitude of TSDs can be quantitatively determined from their dimensions in back-reflection x-ray topography, based on ray-tracing simulation and this has been verified by the images of elementary TSDs. Dislocation senses of closed-core threading screw dislocations and micropipes can be revealed by grazing-incidence x-ray topography. The threading screw dislocations can be converted into Frank partial dislocations on the basal planes and this has been confirmed by transmission synchrotron x-ray topography.

Determination of the lattice translation across {110} APBs in GaAs

1988 ◽  
Vol 46 ◽  
pp. 600-601
Author(s):  
D.R. Rasmussen ◽  
N.-H. Cho ◽  
C.B. Carter
Keyword(s):  
Grain Boundaries ◽  
Lower Energy ◽  
Antiphase Boundary ◽  
The Other ◽  
Boundary Structure ◽  
Interface Plane ◽  
Inversion Symmetry ◽  
High Angle ◽  
Equilibrium Distance

Domains in GaAs can exist which are related to one another by the inversion symmetry, i.e., the sites of gallium and arsenic in one domain are interchanged in the other domain. The boundary between these two different domains is known as an antiphase boundary [1], In the terminology used to describe grain boundaries, the grains on either side of this boundary can be regarded as being Σ=1-related. For the {110} interface plane, in particular, there are equal numbers of GaGa and As-As anti-site bonds across the interface. The equilibrium distance between two atoms of the same kind crossing the boundary is expected to be different from the length of normal GaAs bonds in the bulk. Therefore, the relative position of each grain on either side of an APB may be translated such that the boundary can have a lower energy situation. This translation does not affect the perfect Σ=1 coincidence site relationship. Such a lattice translation is expected for all high-angle grain boundaries as a way of relaxation of the boundary structure.

Determination of the Burgers vector of a dislocation in a Fe-Mn alloy by weak-beam image in HVEM

1978 ◽  
Vol 36 (1) ◽  
pp. 330-331
Author(s):  
Y. Ishida ◽  
H. Ishida ◽  
K. Kohra ◽  
H. Ichinose
Keyword(s):  
High Order ◽  
Simulation Technique ◽  
The Other ◽  
Image Simulation ◽  
Diffraction Vector ◽  
Burgers Vector ◽  
Weak Beam ◽  
Beam Image ◽  
Edge Component

IntroductionA simple and accurate technique to determine the Burgers vector of a dislocation has become feasible with the advent of HVEM. The conventional image vanishing technique(1) using Bragg conditions with the diffraction vector perpendicular to the Burgers vector suffers from various drawbacks; The dislocation image appears even when the g.b = 0 criterion is satisfied, if the edge component of the dislocation is large. On the other hand, the image disappears for certain high order diffractions even when g.b ≠ 0. Furthermore, the determination of the magnitude of the Burgers vector is not easy with the criterion. Recent image simulation technique is free from the ambiguities but require too many parameters for the computation. The weak-beam “fringe counting” technique investigated in the present study is immune from the problems. Even the magnitude of the Burgers vector is determined from the number of the terminating thickness fringes at the exit of the dislocation in wedge shaped foil surfaces.

Procedures for the Quantitative Determination of Autoprothrombin C

1962 ◽  
Vol 08 (03) ◽  
pp. 434-441 ◽  
Author(s):  
Edmond R Cole ◽  
Ewa Marciniak ◽  
Walter H Seegers
Keyword(s):  
Quantitative Determination ◽  
Plasma Sample ◽  
Quantitative Measure ◽  
The Other ◽  
Clotting Time ◽  
Bovine Plasma ◽  
Autoprothrombin C

SummaryTwo quantitative procedures for autoprothrombin C are described. In one of these purified prothrombin is used as a substrate, and the activity of autoprothrombin C can be measured even if thrombin is in the preparation. In this procedure a reaction mixture is used wherein the thrombin titer which develops in 20 minutes is proportional to the autoprothrombin C in the reaction mixture. A unit is defined as the amount which will generate 70 units of thrombin in the standardized reaction mixture. In the other method thrombin interferes with the result, because a standard bovine plasma sample is recalcified and the clotting time is noted. Autoprothrombin C shortens the clotting time, and the extent of this is a quantitative measure of autoprothrombin C activity.

Determination of Factor XIII Activity and of Factor XIII Inhibitors Using an Ammonium-Sensitive Electrode

1983 ◽  
Vol 50 (02) ◽  
pp. 563-566 ◽  
Author(s):  
P Hellstern ◽  
K Schilz ◽  
G von Blohn ◽  
E Wenzel
Keyword(s):  
Factor Xiii ◽  
Normal Subjects ◽  
The Other ◽  
Activity Measurement ◽  
Factor Xiii Deficiency ◽  
Assay Procedure ◽  
Stabilization Factor ◽  
Release Method ◽  
Sensitive Electrode

SummaryAn assay for rapid factor XIII activity measurement has been developed based on the determination of the ammonium released during fibrin stabilization. Factor XIII was activated by thrombin and calcium. Ammonium was measured by an ammonium-sensitive electrode. It was demonstrated that the assay procedure yields accurate and precise results and that factor XIII-catalyzed fibrin stabilization can be measured kinetically. The amount of ammonium released during the first 90 min of fibrin stabilization was found to be 7.8 ± 0.5 moles per mole fibrinogen, which is in agreement with the findings of other authors. In 15 normal subjects and in 15 patients suffering from diseases with suspected factor XIII deficiency there was a satisfactory correlation between the results obtained by the “ammonium-release-method”, Bohn’s method, and the immunological assay (r1 = 0.65; r2= 0.70; p<0.01). In 3 of 5 patients with paraproteinemias the values of factor XIII activity determined by the ammonium-release method were markedly lower than those estimated by the other methods. It could be shown that inhibitor mechanisms were responsible for these discrepancies.

Is all knowledge prepositional?

2005 ◽  
Vol 48 (1-2) ◽  
pp. 7-19
Author(s):  
Miroslava Andjelkovic
Keyword(s):  
Propositional Knowledge ◽  
The Other ◽  
Infinite Regress ◽  
Important Distinction ◽  
Knowing How ◽  
The Asymmetry ◽  
Contemporary Epistemology

This paper deals with a criticism of Ryle's claim that the so called Intellectualist legend leads to an infinite regress. Critics have attempted to show that Ryle's argument cannot even get off the ground since its two basic premises cannot be true at the same time. In the paper I argue that this objection is based on a misinterpretation of Ryle's argumentation, which is complex and consists of two arguments, not of a single one as it is claimed. One of Ryle's argument attacks the thesis that an intelligent act is an indirect result of propositional knowledge, while the other, which I call the Asymmetry argument, claims that not every manifestation of knowledge that is accompanied with the manifestation of knowing how. In the paper I argue that both Ryle's arguments are valid and resistant to recent critique so it can be said that Ryle's distinction between knowledge that and knowing how is still an important distinction within contemporary epistemology.

Determination of the Number of Conserved Chromosomal Segments Between Species

Genetics ◽  
2001 ◽  
Vol 157 (3) ◽  
pp. 1387-1395 ◽  
Author(s):  
Sudhir Kumar ◽  
Sudhindra R Gadagkar ◽  
Alan Filipski ◽  
Xun Gu
Keyword(s):  
Statistical Approach ◽  
Common Ancestor ◽  
Chromosomal Rearrangements ◽  
Structural Similarity ◽  
The Other ◽  
Segment Length ◽  
Human Genomes ◽  
Genomic Divergence ◽  
Human And Mouse

AbstractGenomic divergence between species can be quantified in terms of the number of chromosomal rearrangements that have occurred in the respective genomes following their divergence from a common ancestor. These rearrangements disrupt the structural similarity between genomes, with each rearrangement producing additional, albeit shorter, conserved segments. Here we propose a simple statistical approach on the basis of the distribution of the number of markers in contiguous sets of autosomal markers (CSAMs) to estimate the number of conserved segments. CSAM identification requires information on the relative locations of orthologous markers in one genome and only the chromosome number on which each marker resides in the other genome. We propose a simple mathematical model that can account for the effect of the nonuniformity of the breakpoints and markers on the observed distribution of the number of markers in different conserved segments. Computer simulations show that the number of CSAMs increases linearly with the number of chromosomal rearrangements under a variety of conditions. Using the CSAM approach, the estimate of the number of conserved segments between human and mouse genomes is 529 ± 84, with a mean conserved segment length of 2.8 cM. This length is &lt;40% of that currently accepted for human and mouse genomes. This means that the mouse and human genomes have diverged at a rate of ∼1.15 rearrangements per million years. By contrast, mouse and rat are diverging at a rate of only ∼0.74 rearrangements per million years.

scholarly journals Determination of the Height of Hard X-Ray Sources in the Solar Atmosphere by Measurement of Photospheric Albedo Photons

1975 ◽  
Vol 68 ◽  
pp. 239-241
Author(s):  
John C. Brown ◽  
H. F. Van Beek
Keyword(s):  
Solar Atmosphere ◽  
The Other ◽  
X Ray ◽  
Theoretical Predictions ◽  
Source Models ◽  
The One

SummaryThe importance and difficulties of determining the height of hard X-ray sources in the solar atmosphere, in order to distinguish source models, have been discussed by Brown and McClymont (1974) and also in this Symposium (Brown, 1975; Datlowe, 1975). Theoretical predictions of this height, h, range between and 105 km above the photosphere for different models (Brown and McClymont, 1974; McClymont and Brown, 1974). Equally diverse values have been inferred from observations of synchronous chromospheric EUV bursts (Kane and Donnelly, 1971) on the one hand and from apparently behind-the-limb events (e.g. Datlowe, 1975) on the other.

Determination of Sulfaquinoxaline, Sulfathiazole, Sulfamerazine, and Sulfamethazine in Feed Concentrates or Premixes

1973 ◽  
Vol 56 (6) ◽  
pp. 1475-1479 ◽  
Author(s):  
Ugo R Cieri
Keyword(s):  
Silica Gel ◽  
The Other ◽  
Uv Absorbance ◽  
The Individual

Abstract Sulfaquinoxaline is determined by its UV absorbance at about 358 nm, where the other 3 sulfonamides do not absorb. Sulfathiazole, sulfamerazine, and sulfamethazine are determined by a quantitative TLC procedure, based on the separation of the compounds on silica gel plates; the spots are extracted and the centrifuged extracts are analyzed spectro-photometrically. A method of calculating the total sulfonamide content, independent of the individual components, is also introduced.

Semantic Priming Effect of Metaphor Constituent Terms

2003 ◽  
Vol 96 (1) ◽  
pp. 33-42 ◽  
Author(s):  
Keiko Nakamoto
Keyword(s):  
Semantic Priming ◽  
Priming Effect ◽  
The Other ◽  
Class Inclusion ◽  
Inclusion Model ◽  
Semantic Priming Effect ◽  
The Asymmetry

Camac and Glucksberg reported there was no priming effect between constituent terms of a metaphor and argued that there was no prior similarity or association between the constituents. However, their study had several limitations. An important one was that they neglected the asymmetry of metaphor constituent terms. The purpose of this study is to replicate their experiment under the condition in which one of the constituents preceded the other. The experiment was conducted with Japanese participants using Japanese metaphoric sentences as stimuli. The results showed that the decision was facilitated if the vehicle served as prime and the topic served as target. In contrast, if the topic preceded the vehicle, no priming effect was found. These results are discussed in terms of the class inclusion model proposed earlier by Glucksberg and Keysar.

Sign in / Sign up

Export Citation Format

Share Document