Magnetically Controlled Grain Boundary Motion and Grain Growth in Zinc

2013 ◽  
Vol 753 ◽  
pp. 107-112 ◽  
Author(s):  
Christoph Günster ◽  
Dmitri A. Molodov ◽  
Günter Gottstein
Keyword(s):  
Grain Boundary ◽  
Grain Boundaries ◽  
Grain Growth ◽  
Driving Force ◽  
Boundary Migration ◽  
Boundary Mobility ◽  
Grain Boundary Mobility ◽  
Cold Rolled ◽  
Grain Growth Kinetics ◽  
Grain Boundary Motion

The motion of grain boundaries in zinc bicrystals (99.995%) driven by the “magnetic” driving force was investigated. Planar symmetrical and asymmetrical tilt grain boundaries with rotation angles in the range between 60° and 90° were examined. At a given temperature the boundary migration rate was found to increase linearly with an applied driving force. The absolute grain boundary mobility was determined. The boundary mobility and its temperature dependence were found to depend on the misorientation angle and the inclination of the boundary plane. An application of a magnetic field during the annealing of cold rolled (90%) Zn-1.1%Al sheet specimens resulted in an asymmetry of the two major texture components. This is interpreted in terms of magnetically affected grain growth kinetics.

Grain Growth Kinetics in Microcrystalline Materials

1994 ◽  
Vol 343 ◽  
Author(s):  
V. G. Sursaeva
Keyword(s):  
Activation Energy ◽  
Grain Boundary ◽  
Grain Growth ◽  
Dark Field ◽  
Boundary Mobility ◽  
Boundary Motion ◽  
Grain Boundary Mobility ◽  
Grain Growth Kinetics ◽  
Microcrystalline Materials ◽  
Grain Boundary Motion

ABSTRACTCertain experimental results are presented concerning grain growth in microcrystalline Ag films. Dark field TEM technique was used for the measurement of grain size, trijunction velocity and grain boundary mobility. We found that the activation energy for trijunction motion is 25.0 kJ/g.atom, and the activation energy for the grain boundary motion is 50.0 kJ/g.atom.

Magnetically Controlled Grain Boundary Migration and Microstructure Evolution in Zn

2013 ◽  
Vol 333 ◽  
pp. 101-106
Author(s):  
Dmitri A. Molodov ◽  
Christoph Günster ◽  
Günter Gottstein
Keyword(s):  
Magnetic Field ◽  
Grain Boundary ◽  
Grain Boundaries ◽  
Microstructure Evolution ◽  
Boundary Migration ◽  
Grain Boundary Migration ◽  
Boundary Mobility ◽  
Grain Boundary Mobility ◽  
Cold Rolled

The migration of planar grain boundaries induced by a magnetic field was measured in specially grown zinc bicrystals (99.995%). Particularly, symmetrical and asymmetrical <> tilt grain boundaries with rotation angles in the range between 60° and 90° were investigated. Boundary migration was measured in-situ in the temperature range between 330°C and 415°C and the absolute values of grain boundary mobility were obtained. The results revealed that grain boundary mobility essentially depends on the misorientation angle and the inclination of the boundary plane. An application of a magnetic field during the annealing of cold rolled (90%) Zn-1.1%Al sheet specimens substantially affected the texture and microstructure evolution. This effect is attributed to the additional magnetic driving force for grain growth arising due to the magnetic anisotropy of zinc.

The recrystallization process in some polycrystalline metals

1962 ◽  
Vol 267 (1328) ◽  
pp. 11-30 ◽  
Keyword(s):  
Activation Energy ◽  
Electron Microscope ◽  
Grain Boundary ◽  
Grain Boundaries ◽  
Boundary Migration ◽  
Grain Boundary Migration ◽  
Recrystallization Process ◽  
Boundary Mobility ◽  
Grain Boundary Mobility ◽  
Polycrystalline Metals

Electron microscope observations on some polycrystalline metals suggest that after small to moderate deformation, recrystallization occurs by the migration of the original grain boundaries. A theory based on this mechanism can account for the known form of the recrystallization kinetics without necessarily introducing any anisotropy of grain boundary mobility. For this mechanism the so-called recrystallization activation energy is identical to the activation energy for grain boundary migration.

scholarly journals Secondary Recrystallization Goss Texture Development in a Binary Fe81Ga19 Sheet Induced by Inherent Grain Boundary Mobility

Metals ◽  
2019 ◽  
Vol 9 (12) ◽  
pp. 1254
Author(s):  
Zhenghua He ◽  
Yuhui Sha ◽  
Ning Shan ◽  
Yongkuang Gao ◽  
Fan Lei ◽  
...  
Keyword(s):  
Grain Boundary ◽  
Grain Boundaries ◽  
Grain Growth ◽  
Misorientation Angle ◽  
Secondary Recrystallization ◽  
Angle Distribution ◽  
Boundary Mobility ◽  
Goss Texture ◽  
Grain Boundary Mobility ◽  
Misorientation Angle Distribution

Secondary recrystallization Goss texture was efficiently achieved in rolled, binary Fe81Ga19 alloy sheets without the traditional dependence on inhibitors and the surface energy effect. The development of abnormal grain growth (AGG) of Goss grains was analyzed by quasi-situ electron backscatter diffraction (EBSD). The special primary recrystallization texture with strong {112}–{111}<110> and weak Goss texture provides the inherent pinning effect for normal grain growth by a large number of low angle grain boundaries (<15°) and very high angle grain boundaries (>45°) according to the calculation of misorientation angle distribution. The evolution of grain orientation and grain boundary characteristic indicates that the higher fraction of high energy grain boundaries (20–45°) around primary Goss grains supplies a relative advantage in grain boundary mobility from 950 °C to 1000 °C. The secondary recrystallization in binary Fe81Ga19 alloy is realized in terms of the controllable grain boundary mobility difference between Goss and matrix grains, coupled with the orientation and misorientation angle distribution of adjacent matrix grains.

Magnetically Driven Selective Grain Growth in Locally Deformed Zn Single Crystals

2004 ◽  
Vol 467-470 ◽  
pp. 763-770 ◽  
Author(s):  
P.J. Konijnenberg ◽  
Dmitri A. Molodov ◽  
Günter Gottstein
Keyword(s):  
Grain Boundary ◽  
Grain Boundaries ◽  
Single Crystals ◽  
Grain Growth ◽  
Driving Force ◽  
Grain Orientation ◽  
Boundary Migration ◽  
Grain Boundary Migration ◽  
Single Temperature ◽  
Individual Grains

In magnetically anisotropic materials a driving force for grain boundary migration can be induced by an external magnetic ¯eld. It is experimentally shown that annealing of locally deformed Zn single crystals in a suitably directed high magnetic ¯eld results in a growth of new individual grains. Velocities of some solitary moving grain boundaries were measured and their absolute mobilities were estimated at a single temperature. Results are discussed in terms of preferential grain orientation and boundary character.

Introducing Solute Drag in Irregular Cellular Automata Modeling of Grain Growth

2004 ◽  
Vol 467-470 ◽  
pp. 1045-1050 ◽  
Author(s):  
Koenraad G.F. Janssens ◽  
Elizabeth A. Holm ◽  
Stephen M. Foiles
Keyword(s):  
Grain Boundary ◽  
Grain Boundaries ◽  
Grain Growth ◽  
Boundary Energy ◽  
Solute Drag ◽  
Solute Concentration ◽  
Local Concentration ◽  
Boundary Mobility ◽  
Grain Boundary Mobility ◽  
Dynamics Simulations

In this paper we discuss the principles of a combined approach to solve the problem of solute drag as it occurs in microstructure evolution processes such as grain growth, recrystallization and phase transformation. A recently developed irregular grid cellular automaton is used to simulate normal grain growth, in which the energy of the grain boundaries is the driving force. A new, discrete diffusion model is used to simulate solute segregation to the grain boundaries. The local concentration of the solute is then taken into account in the calculation of the local grain boundary mobility and/or grain boundary energy, thereby constituting a drag force. The relation between solute concentration and grain boundary mobility/energy is derived from molecular dynamics simulations.

Effect of Hexagonal Crystal Structure Anisotropy on the Selective Grain Boundary Mobility during Texture Formation and Secondary Recrystallization in Zn

2005 ◽  
Vol 495-497 ◽  
pp. 1231-1236
Author(s):  
Vera G. Sursaeva
Keyword(s):  
Grain Boundary ◽  
Secondary Recrystallization ◽  
Stress Fields ◽  
Internal Stresses ◽  
Recrystallization Process ◽  
Boundary Mobility ◽  
Texture Formation ◽  
Hexagonal Crystal ◽  
Grain Boundary Mobility ◽  
Grain Boundary Motion

Texture formation during secondary recrystallization depends on the nature of secondary recrystallization process itself. So microstructure evolution and texture development during secondary recrystallization should be discussed concurrently. The main goal of the paper is studying of the effect of internal stresses on grain boundary motion or, more generally, the interaction of grain boundaries with stress fields and the effect of deformation inhomogeniety on grain boundary mobility during secondary recrystallization. Considering transformation from normal grain growth to secondary recrystallization, the attempt was made to characterize the microstructure and to relate it to the processes of nucleation and growth of new rains. The nucleation process is heterogeneous. The data allow us to assume that the nuclei are strain free grains.

Grain Boundary Migration and Compensation Effect

2007 ◽  
Vol 550 ◽  
pp. 387-392
Author(s):  
Pavel Lejček
Keyword(s):  
Grain Boundary ◽  
Grain Boundaries ◽  
Compensation Effect ◽  
Activation Enthalpy ◽  
Boundary Migration ◽  
Grain Boundary Migration ◽  
Boundary Motion ◽  
Exponential Factor ◽  
Grain Boundary Motion

Anisotropy of grain boundary motion in a Fe–6at.%Si alloy is represented by a spectrum of values of the activation enthalpy of migration and the pre-exponential factor, depending on the orientation of individual grain boundaries. The general plot of these values exhibits a pronounced linear interdependence called the compensation effect. It is shown that changes of these values, caused by changes of intensive variables, are thermodynamically consistent.

scholarly journals The Influence of Mg-Based Inclusions on the Grain Boundary Mobility of Austenite in SS400 Steel

Metals ◽  
2019 ◽  
Vol 9 (3) ◽  
pp. 370
Author(s):  
Chih-Ting Lai ◽  
Hsuan-Hao Lai ◽  
Yen-Hao Su ◽  
Fei-Ya Huang ◽  
Chi-Kang Lin ◽  
...  
Keyword(s):  
Grain Boundary ◽  
Grain Growth ◽  
High Temperatures ◽  
Growth Curves ◽  
Solute Drag ◽  
Grain Structure ◽  
Growth Equation ◽  
Boundary Mobility ◽  
Grain Boundary Mobility ◽  
Boundary Velocity

In this study, the effects of the addition of Mg to the grain growth of austenite and the magnesium-based inclusions to mobility were investigated in SS400 steel at high temperatures. A high-temperature confocal scanning laser microscope (HT-CSLM) was employed to directly observe, in situ, the grain structure of austenite under 25 torr Ar at high temperatures. The grain size distribution of austenite showed the log-normal distribution. The results of the grain growth curves using 3D surface fitting showed that the n and Q values of the growth equation parameters ranged from 0.2 to 0.26 and from 405 kJ/mole to 752 kJ/mole, respectively, when adding 5.6–22 ppm of Mg. Increasing the temperature from 1150 to 1250 °C for 20 min and increasing the addition of Mg by 5.6, 11, and 22 ppm resulted in increases in the grain boundary velocity. The effects of solute drag and Zener pinning on grain boundary mobility were also calculated in this study.

Sign in / Sign up

Export Citation Format

Share Document