Monte Carlo Simulation of Texture and Microstructure Transformation during Annealing of Steel

2007 ◽  
Vol 129 ◽  
pp. 83-87
Author(s):  
Hua Long Li ◽  
Jong Tae Park ◽  
Jerzy A. Szpunar
Keyword(s):  
Monte Carlo Simulation ◽  
Monte Carlo ◽  
Grain Boundary ◽  
Computer Model ◽  
Graphical Representation ◽  
Structural Characteristics ◽  
Polycrystalline Materials ◽  
Virtual Experiments ◽  
Grain Boundary Character ◽  
Simulation Based

Controlling texture and microstructure evolution during annealing processes is very important for optimizing properties of steels. Theories used to explain annealing processes are complicated and always case dependent. An recently developed Monte Carlo simulation based model offers an effective tool for studying annealing process and can be used to verify the arbitrarily defined theories that govern such processes. The computer model takes Orientation Image Microscope (OIM) measurements as an input. The abundant information contained in OIM measurement allows the computer model to incorporate many structural characteristics of polycrystalline materials such as, texture, grain boundary character, grain shape and size, phase composition, chemical composition, stored elastic energy, and the residual stress. The outputs include various texture functions, grain boundary and grain size statistics that can be verified by experimental results. Graphical representation allows us to perform virtual experiments to monitor each step of the structural transformation. An example of applying this simulation to Si steel is given.

scholarly journals Voronoi diagram and Monte-Carlo simulation based finite element optimization for cost-effective 3D printing

2021 ◽  
Vol 50 ◽  
pp. 101301
Author(s):  
A.Z. Zheng ◽  
S.J. Bian ◽  
E. Chaudhry ◽  
J. Chang ◽  
H. Haron ◽  
...  
Keyword(s):  
Monte Carlo Simulation ◽  
Finite Element ◽  
Monte Carlo ◽  
3D Printing ◽  
Voronoi Diagram ◽  
Cost Effective ◽  
Simulation Based

scholarly journals A Novel Monte-Carlo Simulation-Based Model for Malware Detection (eRBCM)

Electronics ◽  
2021 ◽  
Vol 10 (22) ◽  
pp. 2881
Author(s):  
Muath Alrammal ◽  
Munir Naveed ◽  
Georgios Tsaramirsis
Keyword(s):  
Monte Carlo Simulation ◽  
Monte Carlo ◽  
Information Systems ◽  
Malware Detection ◽  
New Model ◽  
Malicious Activity ◽  
Model Based ◽  
Simulation Based ◽  
Computer Based ◽  
Reinforcement Model

The use of innovative and sophisticated malware definitions poses a serious threat to computer-based information systems. Such malware is adaptive to the existing security solutions and often works without detection. Once malware completes its malicious activity, it self-destructs and leaves no obvious signature for detection and forensic purposes. The detection of such sophisticated malware is very challenging and a non-trivial task because of the malware’s new patterns of exploiting vulnerabilities. Any security solutions require an equal level of sophistication to counter such attacks. In this paper, a novel reinforcement model based on Monte-Carlo simulation called eRBCM is explored to develop a security solution that can detect new and sophisticated network malware definitions. The new model is trained on several kinds of malware and can generalize the malware detection functionality. The model is evaluated using a benchmark set of malware. The results prove that eRBCM can identify a variety of malware with immense accuracy.

Monte Carlo simulation of Mg segregation to Ni3Al grain boundary

2000 ◽  
Vol 44 (6) ◽  
pp. 319-324 ◽  
Author(s):  
Bingyao Jiang ◽  
Xianghuai Liu ◽  
L.P Zheng ◽  
D.X Li
Keyword(s):  
Monte Carlo Simulation ◽  
Monte Carlo ◽  
Grain Boundary

Risk assessment of construction projects using Monte Carlo simulation

2021 ◽  
Vol ahead-of-print (ahead-of-print) ◽  
Author(s):  
Abroon Qazi ◽  
Mecit Can Emre Simsekler
Keyword(s):  
Monte Carlo Simulation ◽  
Monte Carlo ◽  
Risk Attitude ◽  
High Impact ◽  
Risk Exposure ◽  
Risk Matrix ◽  
Content Type ◽  
Simulation Based ◽  
Project Risks ◽  
Low Probability

PurposeThis paper aims to develop a process for prioritizing project risks that integrates the decision-maker's risk attitude, uncertainty about risks both in terms of the associated probability and impact ratings, and correlations across risk assessments.Design/methodology/approachThis paper adopts a Monte Carlo Simulation-based approach to capture the uncertainty associated with project risks. Risks are prioritized based on their relative expected utility values. The proposed process is operationalized through a real application in the construction industry.FindingsThe proposed process helped in identifying low-probability, high-impact risks that were overlooked in the conventional risk matrix-based prioritization scheme. While considering the expected risk exposure of individual risks, none of the risks were located in the high-risk exposure zone; however, the proposed Monte Carlo Simulation-based approach revealed risks with a high probability of occurrence in the high-risk exposure zone. Using the expected utility-based approach alone in prioritizing risks may lead to ignoring few critical risks, which can only be captured through a rigorous simulation-based approach.Originality/valueMonte Carlo Simulation has been used to aggregate the risk matrix-based data and disaggregate and map the resulting risk profiles with underlying distributions. The proposed process supported risk prioritization based on the decision-maker's risk attitude and identified low-probability, high-impact risks and high-probability, high-impact risks.

Sign in / Sign up

Export Citation Format

Share Document