A Numerical Approach to Multiscale Simulation of Cement Paste Strength

2021 ◽  
Vol 325 ◽  
pp. 3-8
Author(s):  
Michal Hlobil ◽  
Konstantinos Sotiriadis

Recent experimental investigations on the nanoscale of hardened cement paste revealed that the tensile strengths of the microstructural phases present amount to several hundreds of MPa. Confrontation with macroscopic tensile strength testing, by e.g. Brazilian splitting, shows a decrease over two orders of magnitude. A computational model based on a hierarchical representation of hardened cement paste microstructure is presented in this paper, attempting to shed light on the factors affecting the scaling of strength from the nanoscopic scale up to the macroscopic scale. The model is validated on a case study featuring a Portland-limestone cement paste subjected to an external sulfate attack. Such conditions compromise the nanoscopic integrity of the C-S-H gel as a consequence of the progressive decalcification and affect the overall load-bearing capacity of the macroscopic cement paste specimen.

Author(s):  
Yidong Gan ◽  
Hongzhi Zhang ◽  
Minfei Liang ◽  
Erik Schlangen ◽  
Klaas van Breugel ◽  
...  

1999 ◽  
Vol 32 (9) ◽  
pp. 627-634 ◽  
Author(s):  
R. E. Beddoe ◽  
R. Lippok

2021 ◽  
Vol 149 ◽  
pp. 106562
Author(s):  
Yidong Gan ◽  
Matthieu Vandamme ◽  
Yu Chen ◽  
Erik Schlangen ◽  
Klaas van Breugel ◽  
...  

2013 ◽  
Vol 5 (5) ◽  
pp. 530-535
Author(s):  
Lukas Venčkauskas ◽  
Mindaugas Daukšys

The conducted research has established a complex influenceand the impact of separate chemical admixtures of differentpurpose on the parameters of the porosity of hardened cementpaste such as open and closed porosity, the average size of poresand the rates of pore inequality. According to the parametersof the porosity of hardened cement paste, on the basis of A. E.Sheikin’s methodology, the number of freezing-thawing cycleswas predicted. This research used plasticizing, viscosity modifyingand antifoaming admixtures. It has been found that, when theamount of plasticizing admixture in cement paste (W/C–0.45) isconstant and makes 1.1% of the cement mass, and the amountof viscosity modifying and antifoaming the admixture increasesfrom 0.1 to 0.6% and from 0.05 to 0.3% respectively, the openporosity of hardened cement paste varies between 30.21% and31.06%, while closed porosity varies between 5.39% and 6.22%.When the amount of the plasticizing admixture in cement paste(W/C–0.45) exceeds 1.1% of the cement mass, the open porosityof hardened cement paste increases by 1.4 times and closedporosity decreases by 2.5 times. While adding 0.1% of the viscositymodifying admixture to cement paste, the open porosityof hardened cement paste is increased by 1.5 times and closedporosity decreases by 2.4 times. The amount of 0.05% of thecement mass of the antifoaming admixture results in the increasedopen porosity of hardened cement paste by 1.5 times and reducedclosed porosity by 3.5 times. Santrauka Tyrimo metu nustatyta kompleksinė bei atskirų skirtingos paskirties cheminių priedų įtaka cementinio akmens poringumo rodikliams – atvirajam ir uždarajam poringumui, vidutinio porų dydžio ir porų vienodumo rodikliams. Tyrimuose naudoti cheminiai priedai: plastifikuojantis, klampą modifikuojantis ir mišinyje susiformavusias oro poras suardantis priedas. Nustatyta, kad cemento tešloje (V/C – 0,45) esant pastoviam plastifikuojančio priedo kiekiui – 1,0 % cemento masės, klampą modifikuojančio priedo kiekiui kintant nuo 0,1 iki 0,6 %, o mišinyje susiformavusias oro poras suardančio priedo kiekiui kintant nuo 0,05 iki 0,3 %, cementinio akmens atvirasis poringumas svyruoja nuo 30,21 iki 31,06 %, o uždarasis – nuo 5,39 iki 6,22 %. Cemento tešloje viršijus plastifikuojančio priedo 1,1 % cemento masės, cementinio akmens atvirasis poringumas padidėja apie 1,4 karto, o uždarasis poringumas sumažėja apie 2,5 karto. Pridėjus į tešlą 0,1 % cemento masės klampą modifikuojančio priedo, cementinio akmens atvirasis poringumas padidėja apie 1,5 karto, uždarasis poringumas sumažėja apie 2,4 karto. Oro poras suardančio priedo kiekis 0,05 % cemento masės cementinio akmens atvirąjį poringumą padidina apie 1,5 karto, uždarąjį poringumą sumažina apie 3,5 karto.


Sign in / Sign up

Export Citation Format

Share Document