New Design Method of Multi-Stage Hydraulic Fracturing in Shale Horizontal Well

2014 ◽  
Author(s):  
Guo Jianchun ◽  
Gou Bo ◽  
Yu Ting ◽  
Yi Jizheng
Keyword(s):  
Hydraulic Fracturing ◽  
Horizontal Well ◽  
Design Method ◽  
Multi Stage

Multi-Stage Large Scale Hydraulic Fracturing in Horizontal Well, a First in India

2013 ◽  
Author(s):  
Andy Sookprasong ◽  
Sergey Mikhalovich Stolyarov ◽  
Mark Sargon
Keyword(s):  
Hydraulic Fracturing ◽  
Large Scale ◽  
Horizontal Well ◽  
Multi Stage

Design and optimisation of multi-stage hydraulic fracturing in a horizontal well in a shale gas reservoir in the Cooper Basin, South Australia

2015 ◽  
Vol 55 (1) ◽  
pp. 1 ◽  
Author(s):  
Kunakorn Pokalai ◽  
Yang Fei ◽  
Maqsood Ahmad ◽  
Manouchehr Haghighi ◽  
Mary Gonzalez
Keyword(s):  
Hydraulic Fracturing ◽  
Shale Gas ◽  
Horizontal Well ◽  
Productivity Index ◽  
Stress Profile ◽  
Stress Regime ◽  
Vertical Well ◽  
Fracture Simulation ◽  
Multi Stage ◽  
Cooper Basin

Multi-stage hydraulic fracturing in horizontal wells is a well-known technology and is a key mechanism for gas recovery from extremely low permeable shale gas reservoirs. Since Australia’s Cooper Basin has a more complex stress regime and higher temperatures when compared to US shale gas formations, the design and optimisation of this technology in the Cooper Basin has not been explored to the authors’ knowledge. The Murteree and Roseneath shale formations in the Cooper Basin are 8,500 ft in depth and have been targets for shale gas production by different oil and gas operators. Deeper zones are difficult to fracture, as fracture gradients are often above 1 psi/ft. In this study, 1D vertical mechanical earth modelling using petrophysical log data was developed. Then, the stress profile was tuned and validated using the minimum horizontal stress from a mini-frac test taken along a vertical well. A 3D hydraulic fracture simulation in a vertical well as developed as a pilot to select the best locations for horizontal drilling. The selection criteria for the best location included the stress regime, gas flow rate and fracture geometry. Then a multi-stage fracture treatment in a horizontal well was designed. A large number of cases were simulated based on different well lengths, stage spacing and the number of stages. The productivity index was selected as the objective function for the optimisation process. The best case finally was selected as the optimum multi-stage hydraulic fracturing in a horizontal well in the Cooper Basin.

Unconventional Technology: The Difference Between Successful Application and Unsuccessful Application (North America and Overseas)

2015 ◽  
Author(s):  
A.. Casero ◽  
M.. Rylance
Keyword(s):  
North America ◽  
Hydraulic Fracturing ◽  
North American ◽  
Horizontal Well ◽  
Global Market ◽  
Direct Result ◽  
The North ◽  
Multi Stage ◽  
Fracturing Process ◽  
Open Hole

AbstractThe past two decades have seen the development and expansion of an approach to wellbore completions that has resulted in unlocking significant reserves from previously disregarded resource, and has been responsible for the North American shale gas ‘revolution’ or ‘evolution’ (depending upon how you see it). However, this approach has faced significant complications to appropriate, successful and economic deployment, when attempts have been made to export this process overseas.This ground-breaking completion approach was achieved as a direct result of the combination of two well-known and widely applied industry technologies, from distinct disciplines: namely horizontal lateral drilling and propped hydraulic fracture stimulation. This simple combination is referred to by a number of different designations which are used to describe the process, but it is most commonly referred to simply as multi-stage horizontal well hydraulic fracturing.The North American success story has been primarily accomplished through the application of two distinct variants of this technique, split by fundamental approach to the stage sequencing: namely the Plug & Perf approach and the Open Hole Multi-Stage completion system (typically ball-activated fracture ports). The Open Hole Multi-Stage completion system has typically been applied selectively, with a bias towards clastic formations, whereas Plug & Perf has been more widely applied and almost exclusively dominates the shale completion environment.This paper will describe the engineering aspects of the multi-stage horizontal well hydraulic fracturing process, as well as those particular North America conditions and deliberate compromises that have been made, in order to encourage this approach to become established and develop further. Such analysis will include a holistic approach to the global market conditions, in order to better understand the local and regional factors that have played such a fundamental role in North American success, many of which have been erroneously overlooked elsewhere. This paper will investigate a number of these key issues and factors, particularly related to completion and reservoir interaction that should be considered carefully when choosing to export such techniques to new areas of application outside of North America. This will include an understanding of the key data that should be acquired, from the early exploration and subsequent appraisal wells, so that appropriate decisions can be made efficiently.

The Good, the Bad and the Ugly: A Case History of a Multi Stage Hydraulic Fracturing Horizontal Well Tight-Gas Development in Oman

2016 ◽  
Author(s):  
A. Nicolaysen ◽  
A. Casero ◽  
A. Roy ◽  
M. Rylance ◽  
S. Kurniadi ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Case History ◽  
Horizontal Well ◽  
Tight Gas ◽  
Multi Stage ◽  
History Of

Experience of Using Various Horizontal Well Logging Technologies During Multi-Stage Hydraulic Fracturing at Sredne-Nazymskoye Field

2019 ◽  
Author(s):  
Valery Karpov ◽  
Nikolay Parshin ◽  
Arsenty Ryazanov ◽  
Kirill Ovchinnikov ◽  
Igor Novikov ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Horizontal Well ◽  
Well Logging ◽  
Multi Stage

Experience of Using Various Horizontal Well Logging Technologies During Multi-Stage Hydraulic Fracturing at Sredne-Nazymskoye Field (Russian)

2019 ◽  
Author(s):  
Valery Karpov ◽  
Nikolay Parshin ◽  
Arsenty Ryazanov ◽  
Kirill Ovchinnikov ◽  
Igor Novikov ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Horizontal Well ◽  
Well Logging ◽  
Multi Stage

Novel Coiled Tubing Perforation Approach Enables Efficient Multistage Hydraulic Fracturing Operations in a Horizontal Well in Oman

2016 ◽  
Author(s):  
Ali Al-Ghaithi ◽  
Fahad Alawi ◽  
Ernest Sayapov ◽  
Ehab Ibrahim ◽  
Najet Aouchar ◽  
...  
Keyword(s):  
Hydraulic Fracturing ◽  
Horizontal Well ◽  
Multistage Hydraulic Fracturing ◽  
Coiled Tubing
Sign in / Sign up

Export Citation Format

Share Document