Permeability Estimation of Fractured and Vuggy Carbonate Reservoir by Permeability Multiplier Method in Bai Hassan Oil Field Northern Iraq

Carbonate reservoirs are highly heterogeneous. During waterflooding stage, the channeling phenomenon of displacing fluid in high-permeability layers easily leads to early water breakthrough and high water-cut with low recovery rate. To quantitatively characterize the inter-well connectivity parameters (including conductivity and connected volume), we developed an inter-well connectivity model based on the principle of inter-well connectivity and the geological data and development performance of carbonate reservoirs. Thus, the planar water injection allocation factors and water injection utilization rate of different layers can be obtained. In addition, when the proposed model is integrated with automatic history matching method and production optimization algorithm, the real-time oil and water production can be optimized and predicted. Field application demonstrates that adjusting injection parameters based on the model outputs results in a 1.5% increase in annual oil production, which offers significant guidance for the efficient development of similar oil reservoirs. In this study, the connectivity method was applied to multi-layer real reservoirs for the first time, and the injection and production volume of injection-production wells were repeatedly updated based on multiple iterations of water injection efficiency. The correctness of the method was verified by conceptual calculations and then applied to real reservoirs. So that the oil field can increase production in a short time, and has good application value.

Download Full-text

Estimation of Oil-Water Contact Level Using Different Approaches: A Case Study for an Iraqi Carbonate Reservoir

Journal of Petroleum Research and Studies ◽

10.52716/jprs.v10i2.354 ◽

2020 ◽

Vol 10 (2) ◽

pp. 95-113

Author(s):

Wisam I. Al-Rubaye ◽

Dhiaa S. Ghanem ◽

Hussein Mohammed Kh ◽

Hayder Abdulzahra ◽

Ali M. Saleem ◽

...

Keyword(s):

Capillary Pressure ◽

Reservoir Characterization ◽

Petroleum Industry ◽

Carbonate Reservoir ◽

Oil Field ◽

Accurate Estimation ◽

Water Contact ◽

Oil Water ◽

Original Oil In Place ◽

Drainage Data

In petroleum industry, an accurate description and estimation of the Oil-Water Contact(OWC) is very important in quantifying the resources (i.e. original oil in place (OIIP)), andoptimizing production techniques, rates and overall management of the reservoir. Thus,OWC accurate estimation is crucial step for optimum reservoir characterization andexploration. This paper presents a comparison of three different methods (i.e. open holewell logging, MDT test and capillary pressure drainage data) to determine the oil watercontact of a carbonate reservoir (Main Mishrif) in an Iraqi oil field "BG”. A total of threewells from "BG" oil field were evaluated by using interactive petrophysics software "IPv3.6". The results show that using the well logging interpretations leads to predict OWCdepth of -3881 mssl. However, it shows variance in the estimated depth (WELL X; -3939,WELL Y; -3844, WELL Z; -3860) mssl, which is considered as an acceptable variationrange due to the fact that OWC height level in reality is not constant and its elevation isusually changed laterally due to the complicated heterogeneity nature of the reservoirs.Furthermore, the results indicate that the MDT test can predict a depth of OWC at -3889mssl, while the capillary drainage data results in a OWC depth of -3879 mssl. The properMDT data and SCAL data are necessary to reduce the uncertainty in the estimationprocess. Accordingly, the best approach for estimating OWC is the combination of MDTand capillary pressure due to the field data obtained are more reliable than open hole welllogs with many measurement uncertainties due to the fact of frequent borehole conditions.

Download Full-text