Calibration of the Image Distortion Induced Error for a Plane Strain Field Measured Using Digital Image Correlation Techniques

2009 ◽  
Author(s):  
S.H. Tung ◽  
J.C. Kuo ◽  
M.H. Shih
Keyword(s):  
Digital Image Correlation ◽  
Plane Strain ◽  
Digital Image ◽  
Strain Field ◽  
Image Distortion ◽  
Image Correlation ◽  
Correlation Techniques

Digital Image Correlation Techniques for Analysing the Deformation Behaviour of Compacted Graphite Cast Irons on a Microstructural Level

2011 ◽  
Vol 70 ◽  
pp. 171-176 ◽  
Author(s):  
Torsten Sjögren ◽  
Fredrik Wilberfors ◽  
Monika Alander
Keyword(s):  
Digital Image Correlation ◽  
Digital Image ◽  
Strain Field ◽  
Deformation Behaviour ◽  
Image Correlation ◽  
Cast Irons ◽  
Graphite Phase ◽  
Compacted Graphite ◽  
Graphite Particles ◽  
Correlation Techniques

Digital image correlation techniques (DIC) have been used in this study to reveal how different phases (graphite, ferrite and pearlite) of compacted graphite cast irons (CGI) accommodate strains at loading. A DIC-software was used to analyse sets of successively acquired images. The images were acquired with a light optical microscope revealing the microstructure of polished and etched CGI materials at different load levels. Five CGI materials, having percentages of pearlite in the range 35 to 90 area%, were included in the study. Apart from the different matrix constituents (ferrite and pearlite) the nodularity was altered and varied from 5% to 65%. It is concluded from this study that the different phases in CGI are affected by the global strain and load to a greater or less extent. The graphite phase appears to accommodate high strains but, due to fracture of the graphite particles at relatively low strains, the resulting high strain values show the opening up of graphite cavities. The ferrite phase is subjected to a strain concentrating effect of the graphite phase and with a low nodularity, i.e., with graphite particles that are stretched out and interconnected, the effect becomes more pronounced resulting in high strains. The pearlitic phase is the strongest of the constituents within the microstructure and the lowest local strains are observed in this phase. The study shows that DIC strain-field images reveal the microstructural strain level distribution for the CGI materials. The future outlook is to use these sets of strain-field images for verification of micro mechanical finite element analysis on a microstructural scale of CGI materials.

Methodology for in situ stress intensity factor determination on cracked structures by digital image correlation

2010 ◽  
Vol 1 (4) ◽  
pp. 344-357 ◽  
Author(s):  
V. Richter‐Trummer ◽  
P.M.G.P. Moreira ◽  
S.D. Pastrama ◽  
M.A.P. Vaz ◽  
P.M.S.T. de Castro
Keyword(s):  
Stress Intensity Factor ◽  
Stress Intensity ◽  
Digital Image Correlation ◽  
Intensity Factor ◽  
Digital Image ◽  
Strain Field ◽  
Image Correlation ◽  
Content Type ◽  
Cracked Structures

PurposeThe purpose of this paper is to develop a methodology for in situ stress intensity factor (SIF) determination that can be used for the analysis of cracked structures. The technique is based on digital image correlation (DIC) combined with an overdetermined algorithm.Design/methodology/approachThe linear overdeterministic algorithm for calculating the SIF based on stress values around the crack tip is applied to a strain field obtained by DIC.FindingsAs long as the image quality is sufficiently high, a good accuracy can be obtained for the measured SIF. The crack tip can be automatically detected based on the same strain field. The use of the strain field instead of the displacement field, eliminates problems related to the rigid body motion of the analysed structure.Practical implicationsIn future works, based on the applied techniques, the SIF of complex cracked plane stress structures can be accurately determined in real engineering applications.Originality/valueThe paper demonstrates application of known techniques, refined for other applications, also the use of stress field for SIF overdeterministic calculations.

scholarly journals A new methodology to identify minimum strain anatomical lines based on 3-D digital image correlation

2017 ◽  
Vol 8 (2) ◽  
pp. 337-347 ◽  
Author(s):  
Jorge Barrios-Muriel ◽  
Francisco Javier Alonso Sánchez ◽  
David Rodríguez Salgado ◽  
Francisco Romero-Sánchez
Keyword(s):  
Digital Image Correlation ◽  
Digital Image ◽  
Strain Field ◽  
Three Dimensional ◽  
Wearable Devices ◽  
Plane Motion ◽  
Human Motion ◽  
The Body ◽  
Image Correlation ◽  
Minimum Deformation

Abstract. Today there is continuous development of wearable devices in various fields such as sportswear, orthotics and personal gadgets, among others. The design of these devices involves the human body as a support environment. Based on this premise, the development of wearable devices requires an improved understanding of the skin strain field of the body segment during human motion. This paper presents a methodology based on a three dimensional digital image correlation (3D-DIC) system to measure the skin strain field and to estimate anatomical lines with minimum deformation as design criteria for the aforementioned wearable devices. The errors of displacement and strain measurement related to 3-D reconstruction and out-of-plane motion are investigated and the results are acceptable in the case of large deformation. This approach can be an effective tool to improve the design of wearable devices in the clinical orthopaedics and ergonomics fields, where comfort plays a key role in supporting the rehabilitation process.

Fluorescent digital image correlation techniques in experimental mechanics

2017 ◽  
Vol 61 (1) ◽  
pp. 21-36 ◽  
Author(s):  
ZhenXing Hu ◽  
TingGe Xu ◽  
XueMin Wang ◽  
ZhiMing Xie ◽  
HuiYang Luo ◽  
...  
Keyword(s):  
Digital Image Correlation ◽  
Digital Image ◽  
Image Correlation ◽  
Experimental Mechanics ◽  
Correlation Techniques
Sign in / Sign up

Export Citation Format

Share Document