Computational Fluid Dynamics (CFD) Analysis of Lubricant Oil Tank Sloshing of a High-Performance Car under Racetrack Maneuvers

2021 ◽  
Vol 15 (1) ◽  
Author(s):  
Stefano Fontanesi ◽  
Mattia Olcuire ◽  
Giuseppe Cicalese ◽  
Luca Lamberti ◽  
Francesco Pulvirenti ◽  
...  
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
High Performance ◽  
Cfd Analysis ◽  
Lubricant Oil ◽  
Computational Fluid Dynamics Cfd ◽  
Oil Tank ◽  
Tank Sloshing

Analysis of an Airfoil Using a Transition and Turbulence Model

2016 ◽  
Vol 819 ◽  
pp. 356-360
Author(s):  
Mazharul Islam ◽  
Jiří Fürst ◽  
David Wood ◽  
Farid Nasir Ani
Keyword(s):  
Fluid Dynamics ◽  
Boundary Layer ◽  
Computational Fluid Dynamics ◽  
Kinetic Energy ◽  
Turbulence Model ◽  
Original Version ◽  
Transitional Region ◽  
Cfd Analysis ◽  
Computational Fluid Dynamics Cfd

In order to evaluate the performance of airfoils with computational fluid dynamics (CFD) tools, modelling of transitional region in the boundary layer is very critical. Currently, there are several classes of transition-based turbulence model which are based on different methods. Among these, the k-kL- ω, which is a three equation turbulence model, is one of the prominent ones which is based on the concept of laminar kinetic energy. This model is phenomenological and has several advantageous features. Over the years, different researchers have attempted to modify the original version which was proposed by Walter and Cokljat in 2008 to enrich the modelling capability. In this article, a modified form of k-kL-ω transitional turbulence model has been used with the help of OpenFOAM for an investigative CFD analysis of a NACA 4-digit airfoil at range of angles of attack.

CFD Comparison of Clearance Flow in a Rotor-Casing Assembly Using Asymmetric vs. Symmetric Lobe Rotors

2003 ◽  
Author(s):  
Bassam Abu-Hijleh ◽  
Jiyuan Tu ◽  
Aleksander Subic ◽  
Huafeng Li ◽  
Katherine Ilie
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Numerical Analysis ◽  
Mesh Generation ◽  
Cfd Analysis ◽  
Air Leakage ◽  
Flow Conditions ◽  
Leakage Path ◽  
Clearance Flow ◽  
Computational Fluid Dynamics Cfd

The performance of a Rotor-Casing Assembly is influenced more by the internal air leakages than by any other thermo-fluid aspect of its behaviour. The pressure difference driving the air along a leakage path varies periodically and does so in a manner that may not be the same for every leakage path. So the distribution of leakage through the various leakage paths within the machine is important for the improvement of its performance. The total volume of air leakage and the distribution of the leakage among the different paths depend on the rotor-rotor and rotor-casing clearances as well as the geometry of the rotors’ lobes. Computational Fluid Dynamics (CFD) analysis was carried out using the FLUENT. Geometry definition, mesh generation, boundary and flow conditions, and solver parameters have all been investigated as the part of the numerical analysis. This analysis was conducted for static rotors at different positions. The results indicate that the size of the clearances as well as the geometry of the rotors’ lobes can have a significant effect on the total volume of the air leakage as well as the distribution of the leakage among the three main leakage paths. The results can be used to ascertain the proper levels of clearances to be used and the best rotor lobes geometry to be used for the practical reduction of air leakage.

scholarly journals Aerodynamic performance of X-plane with two different types of inboard stores

2018 ◽  
Vol 7 (4.13) ◽  
pp. 202-204
Author(s):  
Mahadhir A Rahman ◽  
Mohammad Yazdi Harmin ◽  
Mohd Fuad Koslan ◽  
Mohd Rashdan Saad ◽  
Mohd Faisal Abdul Hamid
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Aerodynamic Performance ◽  
Cfd Analysis ◽  
Aircraft Model ◽  
Different Types ◽  
Computational Fluid Dynamics Cfd

This paper presents the investigation of aerodynamic performance of inboard Store-X and Store-Y configurations on the X-plane aircraft model through computational fluid dynamics (CFD) analysis. The X-plane and Store-Y represent the default store and pylon integration while Store-X provides a possibility for other types of store to be integrated. These stores are loosely based upon the two most commonly used by the western and eastern blocks. The resultant lift, drag and moment forces are of interest in order to observe their impact with respect to the two different stores configurations. The finding shows that the aerodynamic impact with respect to Store-X installation on the inboard pylon station is insignificant when compared to default system, hence offers the safety of delivering the Store-X from the X-plane aircraft.

Numerical Prediction of Blended Wing Body Aerodynamic Characteristics at Subsonic Speed

2014 ◽  
Vol 71 (2) ◽  
Author(s):  
Pang Jung Hoe ◽  
Nik Ahmad Ridhwan Nik Mohd
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
High Performance ◽  
Aerodynamic Characteristic ◽  
Aerodynamic Characteristics ◽  
Numerical Prediction ◽  
Navier Stokes ◽  
Subsonic Speed ◽  
Computational Fluid Dynamics Cfd ◽  
Blended Wing Body

The need for high performance and green aircraft has brought the blended wing (BWB) aircraft concept to the centre of interest for many researchers. BWB is a type of aircraft characterized by a complex blending geometry between fuselage and wing. Recently, many researches had been performed to unlock its aerodynamic complexity that is still not well understood. In this paper, aerodynamic characteristic of a baseline BWB configuration derived from simple conventional aircraft configuration was analysed using the Reynolds-averaged Navier-Stokes computational fluid dynamics (CFD) solver. The main objectives of this work are to predict the aerodynamic characteristics of the BWB concept at steady flight conditions and at various pitch angles. The results obtained are then compared against a simple conventional aircraft configuration (CAC). The results show that the BWB configuration used has 24% higher L/D ratio than the CAC. The increment to the L/D however is mainly due to lower drag than the improvement in the lift. 

Sign in / Sign up

Export Citation Format

Share Document