CFD Comparison of Clearance Flow in a Rotor-Casing Assembly Using Asymmetric vs. Symmetric Lobe Rotors

2003 ◽  
Author(s):  
Bassam Abu-Hijleh ◽  
Jiyuan Tu ◽  
Aleksander Subic ◽  
Huafeng Li ◽  
Katherine Ilie
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Numerical Analysis ◽  
Mesh Generation ◽  
Cfd Analysis ◽  
Air Leakage ◽  
Flow Conditions ◽  
Leakage Path ◽  
Clearance Flow ◽  
Computational Fluid Dynamics Cfd

The performance of a Rotor-Casing Assembly is influenced more by the internal air leakages than by any other thermo-fluid aspect of its behaviour. The pressure difference driving the air along a leakage path varies periodically and does so in a manner that may not be the same for every leakage path. So the distribution of leakage through the various leakage paths within the machine is important for the improvement of its performance. The total volume of air leakage and the distribution of the leakage among the different paths depend on the rotor-rotor and rotor-casing clearances as well as the geometry of the rotors’ lobes. Computational Fluid Dynamics (CFD) analysis was carried out using the FLUENT. Geometry definition, mesh generation, boundary and flow conditions, and solver parameters have all been investigated as the part of the numerical analysis. This analysis was conducted for static rotors at different positions. The results indicate that the size of the clearances as well as the geometry of the rotors’ lobes can have a significant effect on the total volume of the air leakage as well as the distribution of the leakage among the three main leakage paths. The results can be used to ascertain the proper levels of clearances to be used and the best rotor lobes geometry to be used for the practical reduction of air leakage.

scholarly journals CFD-Based Selection of Dispersion Plates

2018 ◽  
Vol 232 ◽  
pp. 03047
Author(s):  
Jing Chen ◽  
Ning Deng ◽  
Guoyong Wu ◽  
Jinqing Zhou
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Cfd Analysis ◽  
Flow Conditions ◽  
Dispersion Effects ◽  
Velocity Flow ◽  
Computational Fluid Dynamics Cfd ◽  
Selection Of

Computational Fluid Dynamics (CFD) technology was used to analyse dispersion effects of 3 plates of different structures during adhesives production. Three models of the dispersion plates were designed: (1) Project 1: a plate with sharp and short teeth, (2) Project 2: a plate with sharp and long teeth, (3) Project 3: a plate with blunt and long teeth. Pictures of velocity flow contours and flow trajectories in the CFD analysis were obtained to show the flow conditions inside the Reactor. Particle studies were also run to predict adhesive particles dispersion effects of these 3 kinds of plates, so that the best structure of the plate would be chosen.

Analysis of an Airfoil Using a Transition and Turbulence Model

2016 ◽  
Vol 819 ◽  
pp. 356-360
Author(s):  
Mazharul Islam ◽  
Jiří Fürst ◽  
David Wood ◽  
Farid Nasir Ani
Keyword(s):  
Fluid Dynamics ◽  
Boundary Layer ◽  
Computational Fluid Dynamics ◽  
Kinetic Energy ◽  
Turbulence Model ◽  
Original Version ◽  
Transitional Region ◽  
Cfd Analysis ◽  
Computational Fluid Dynamics Cfd

In order to evaluate the performance of airfoils with computational fluid dynamics (CFD) tools, modelling of transitional region in the boundary layer is very critical. Currently, there are several classes of transition-based turbulence model which are based on different methods. Among these, the k-kL- ω, which is a three equation turbulence model, is one of the prominent ones which is based on the concept of laminar kinetic energy. This model is phenomenological and has several advantageous features. Over the years, different researchers have attempted to modify the original version which was proposed by Walter and Cokljat in 2008 to enrich the modelling capability. In this article, a modified form of k-kL-ω transitional turbulence model has been used with the help of OpenFOAM for an investigative CFD analysis of a NACA 4-digit airfoil at range of angles of attack.

Numerical Analysis of the LCS 2 airwake to understand potential interactions during helipcopter operations

2015 ◽  
Author(s):  
Brent S. Paul
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Numerical Analysis ◽  
Flow Field ◽  
Ship Design ◽  
It Impacts ◽  
Flight Envelope ◽  
Computational Fluid Dynamics Cfd ◽  
Potential Interactions ◽  
Flight Deck

The successful integration of aviation capabilities aboard ships is a complex endeavor that must balance ship design with the flight envelope of the helicopter. This can be particularly important when considering air wakes and other flow around the superstructure as it impacts the flight deck. This flow can generate unsteady structures that may interfere with safe helicopter operations. Computational fluid dynamics (CFD) is commonly used to characterize the flow field and assess potential impacts to the flight envelope, which can be used to help define an operating envelope for helicopter operations.

scholarly journals Comparison of Blade Element Method and CFD Simulations of a 10 MW Wind Turbine

Fluids ◽  
2018 ◽  
Vol 3 (4) ◽  
pp. 73 ◽  
Author(s):  
Galih Bangga
Keyword(s):  
Fluid Dynamics ◽  
Computational Fluid Dynamics ◽  
Flow Separation ◽  
Spatial Interpolation ◽  
Flow Conditions ◽  
Cfd Simulations ◽  
Computational Fluid Dynamics Cfd ◽  
Correction Terms ◽  
Selection Of ◽  
Blade Element

The present studies deliver the computational investigations of a 10 MW turbine with a diameter of 205.8 m developed within the framework of the AVATAR (Advanced Aerodynamic Tools for Large Rotors) project. The simulations were carried out using two methods with different fidelity levels, namely the computational fluid dynamics (CFD) and blade element and momentum (BEM) approaches. For this purpose, a new BEM code namely B-GO was developed employing several correction terms and three different polar and spatial interpolation options. Several flow conditions were considered in the simulations, ranging from the design condition to the off-design condition where massive flow separation takes place, challenging the validity of the BEM approach. An excellent agreement is obtained between the BEM computations and the 3D CFD results for all blade regions, even when massive flow separation occurs on the blade inboard area. The results demonstrate that the selection of the polar data can influence the accuracy of the BEM results significantly, where the 3D polar datasets extracted from the CFD simulations are considered the best. The BEM prediction depends on the interpolation order and the blade segment discretization.

Sign in / Sign up

Export Citation Format

Share Document