Stereoscopic Micro-PIV Measurement of Near-Wall Velocity Distribution in Strong Tumble Flow under Motored SI Engine Condition

2020 ◽  
Author(s):  
Yoko Yamakita ◽  
Jaeok Bae ◽  
Tsuyoshi Nagasawa ◽  
Hidenori Kosaka
Author(s):  
Hongyuan Li ◽  
Yufan Cao ◽  
Xiangyu Wang ◽  
Xia Wan ◽  
Yaolei Xiang ◽  
...  

Abstract To accurately measure the near-wall flow by particle image velocimetry (PIV) is a big challenge, especially for the slip boundary condition. Apart from high-precision measurements, an appropriate PIV algorithm is important to resolve the near-wall velocity profile. In our study, single-pixel algorithm is employed to calculate the near-wall flow, which is demonstrated to be capable of accurately resolving the flow velocity near the slip boundary condition. Based on the synthetic particle images, the advantages of the single-pixel algorithm are manifested in comparison with the conventional window correlation algorithm. Specially, the single-pixel algorithm has higher spatial resolution and accuracy, and lower systematic error and random error for the case of slip boundary condition. Furthermore, for experimental verification, micro-PIV measurements are conducted over a liquid-gas interface and the single-pixel algorithm is successfully applied to the calculation of near-wall velocity under the slip boundary condition, especially the negative slip velocity. The current work demonstrates the advantage of the single-pixel algorithm in analyzing the complex flow under the slip boundary condition, such as drag reduction, wall skin friction evaluation and near-wall vortex structure measurement.


Author(s):  
Yoshiyasu Ichikawa ◽  
Kojiro Nishiwake ◽  
Hiromu Wakayama ◽  
Yuki Kameya ◽  
Makoto Yamamoto ◽  
...  

It is well known that there is a strong correlation between heat transfer and near-wall flow. It is important to obtain the detailed near-wall flow field, but it has a lot of difficulties to measure near-wall region by traditional approaches for example hot wire anemometry and particle image velocimetry (PIV). The purpose of this study is to determine the three-dimensional velocity field at near-wall area in micron resolution by the astigmatism particle tracking velocimetry (APTV). In this study, an estimation of depth location of tracer particles by applying a specialized imaging optics controlling the astigmatism [1] was employed. We have developed a measurement system to get the particle location within 15 μm from wall using a long-working-distance microscope with astigmatic optics. As a proof-of-concept, near-wall velocity field in a millimeter-ordered parallel plate channel was measured with low Reynolds numbers (Re = 1 ∼ 5) Poiseuille flow to confirm the validity of it. As a result, we can obtain the near-wall velocity within 15 μm from the wall precisely. From the velocity distribution, the standard deviation of the velocity at each location was calculated and the dispersion of velocity was evaluated. As a result, it was confirmed that the measurement was carried out more accurately in high-speed area. Comparison of the measured velocity distribution with a theoretical calculation and micro-PIV results were also done. From these velocity distributions, the wall shear stress on the wall was determined.


Author(s):  
Puxuan Li ◽  
Steve J. Eckels ◽  
Garrett W. Mann ◽  
Ning Zhang

The current study investigates the flow field near a surface with a micro-PIV system using a square tube to enhance optical access. Measurements of velocity fields and eddy structures near the wall of tubes are important to the design of in-tube surface geometries. In experimental fluid mechanics, particle image velocimetry (PIV) is now a common way to measure velocity. However, PIV measurements near walls require efforts to deal with low particle density, high shear gradient and wall reflection. The current paper discusses a PIV measurement technique utilized to observe flow dynamics in near-wall regions. PIV uncertainty analysis is discussed in this study. The experimental results are compared with previous results for validation.


Author(s):  
Marius Schmidt ◽  
Carl-Philipp Ding ◽  
Brian Peterson ◽  
Andreas Dreizler ◽  
Benjamin Böhm

Micromachines ◽  
2018 ◽  
Vol 9 (12) ◽  
pp. 668 ◽  
Author(s):  
Kanji Kaneko ◽  
Takayuki Osawa ◽  
Yukinori Kametani ◽  
Takeshi Hayakawa ◽  
Yosuke Hasegawa ◽  
...  

The steady streaming (SS) phenomenon is gaining increased attention in the microfluidics community, because it can generate net mass flow from zero-mean vibration. We developed numerical simulation and experimental measurement tools to analyze this vibration-induced flow, which has been challenging due to its unsteady nature. The validity of these analysis methods is confirmed by comparing the three-dimensional (3D) flow field and the resulting particle trajectories induced around a cylindrical micro-pillar under circular vibration. In the numerical modeling, we directly solved the flow in the Lagrangian frame so that the substrate with a micro-pillar becomes stationary, and the results were converted to a stationary Eulerian frame to compare with the experimental results. The present approach enables us to avoid the introduction of a moving boundary or infinitesimal perturbation approximation. The flow field obtained by the micron-resolution particle image velocimetry (micro-PIV) measurement supported the three-dimensionality observed in the numerical results, which could be important for controlling the mass transport and manipulating particulate objects in microfluidic systems.


2010 ◽  
Vol 8 (3) ◽  
pp. 22-28
Author(s):  
S.R. Jeong ◽  
T.D. Dang ◽  
J.H. Choi ◽  
G.M. Kim ◽  
C.W. Park

Author(s):  
Haruyuki Kinoshita ◽  
Marie Oshima ◽  
Jong Wook Hong ◽  
Teruo Fujii ◽  
Tetsuo Saga ◽  
...  

Sign in / Sign up

Export Citation Format

Share Document