Experimental and Modeling Study of Wall Film Effect on Combustion Characteristics of Premixed Flame in a Constant Volume Combustion Bomb

The primary objective of the present study was to investigate the impact of wall film on the combustion characteristics of premixed flames in internal combustion engines through the joint experimental and numerical techniques. The interaction between the premixed methane-air flame and n-dodecane film attached to the wall of a constant volume combustion bomb was experimentally examined. The flame propagation processes, as well as pressure evolution were quantitatively characterized. Then, computational fluid dynamic (CFD) simulation was performed incorporating the combustion chemistry model. To enable efficient simulation of the chemically reacting flow in engine chambers, a simplified modeling approach based on a two-step reaction scheme was developed. A compact reaction model for the selected model fuel n-dodecane was constructed and reduced to include 35 chemical species and 180 reactions. The flame propagation process of the premixed flame and its interaction with dry and wet walls was studied. The results showed that the propagation of the premixed flame could be divided into four stages, and the existence of the slit structure increased the instability of the flame structure in the near-wall region. The wall film tended to promote emissions, producing more unburned hydrocarbons, soot precursors and aldehydes.

Photocrosslinking of Adventitial Collagen in the Porcine Abdominal Aorta: A Preliminary Approach to a Strategy for Prevention of Aneurysmal Rupture

This study was aimed at generating data for designing a potential method to prevent the rupture of the abdominal aortic aneurysm (AAA). We found that the mechanical strength and stiffness of blood vessel walls was enhanced by the crosslinking of adventitial collagen through a photochemical process promoted by ultraviolet-A (UV-A) radiation. The experiments were carried out on samples isolated from 25 normal porcine aortas. The adventitial layer was separated from the other layers and exposed to UV radiation of 365-nm wavelength, in the presence of a riboflavin compound as the photosensitizer. Mechanical testing of 30 specimens, prior to and after exposure, indicated an increase in both strength (ultimate stress) and stiffness (Young’s modulus) of the adventitial specimens following irradiation. The crosslinking process also led to an enhanced resistance to experimental collagenolysis, as determined on six specimens. At this phase of conceptual design, we suggest that by applying this method to an aneurysmal dilated wall region, the stabilization of tunica adventitia may delay or prevent the rupture of the aneurysm and, with further investigation and refinement, can become a therapeutic strategy for arresting the progression of AAA.

Peristaltic flow of electrically conducting nanofluid under the action of Joule and radiative heat within an asymmetric microchannel

The proposed mathematical model is based upon the peristaltic flow of an electrical conducting nanofluid within an asymmetric microchannel. The flow takes place under the action of dissipative heat energy due to the occurrence of the magnetic field that is basically known as Joule heating and radiative heat proposed as thermal radiation along with the additional heat source. Moreover, the impact of upper/lower wall zeta potential and the expression for the electric potential is presented using the Poisson Boltzmann equation and Debey length approximation. The well-known numerical practice is used for distorted governing equations with appropriate boundary conditions. Further, computation of the pressure gradient is obtained for the associated physical parameters. The graphical illustration shows the characteristics of the pertinent parameters on the flow problem and the tabular result represents the simulated values for the rate coefficients. In the significant examination, the study reveals that the mobility parameter due to the occurrence of the electric field vis-à-vis time parameter encourages the velocity distribution within the center of the channel furthermore significant retardation occurs near the wall region.

Numerical Investigation of Heat Transfer Characteristics of scCO2 Flowing in a Vertically-Upward Tube with High Mass Flux

In this work, the heat transfer characteristics of supercritical pressure CO2 in vertical heating tube with 10 mm inner diameter under high mass flux were investigated by using an SST k-ω turbulent model. The influences of inlet temperature, heat flux, mass flux, buoyancy and flow acceleration on the heat transfer of supercritical pressure CO2 were discussed. Our results show that the buoyancy and flow acceleration effect based on single phase fluid assumption fail to explain the current simulation results. Here, supercritical pseudo-boiling theory is introduced to deal with heat transfer of scCO2. ScCO2 is treated to have a heterogeneous structure consisting of vapor-like fluid and liquid-like fluid. A physical model of scCO2 heat transfer in vertical heating tube was established containing a gas-like layer near the wall and a liquid-like fluid layer. Detailed distribution of thermophysical properties and turbulence in radial direction show that scCO2 heat transfer is greatly affected by the thickness of gas-like film, thermal properties of gas-like film and turbulent kinetic energy in the near-wall region. Buoyancy parameters Bu < 10-5, Bu* < 5.6 × 10−7 and flow acceleration parameter Kv < 3 × 10−6 in this paper, which indicate that buoyancy effect and flow acceleration effect has no influence on heat transfer of scCO2 under high mass fluxes. This work successfully explains the heat transfer mechanism of supercritical fluid under high mass flux.

Doppler Weather Radar analysis of short term cyclonic storm

On the east coast of India, during South-West monsoon period severe cyclonic storms are very rare and if they are short term cyclones then their prediction becomes very difficult due to rapid change in the intensity of the system. Though synoptic observations failed and satellite observations also cannot give decisive picture about such systems, in that case timely warning can not be issued by the weather agencies. Such a system was formed on 19 September, 2006 at about 250 km South-East of Kolkata (India). Very heavy rainfall associated with the system caused several human casualties and extensive damage to the property. According to news agencies, more than 100 people died and a million people became homeless due to heavy rainfall and strong winds associated with the cyclone during 19 September -21, 2006. At 0600 UTC, Doppler Weather radar (DWR) at Kolkata observed initial signatures of the system like a depression. Subsequently at 0900 UTC the observations indicated that the intensification of the system has taken place to a higher stage of deep depression and at about 1200 UTC clear spiral bands with a circular eye recorded by DWR confirmed for a fully developed severe cyclonic storm. The system weakened in to a deep depression at 1630 UTC after the landfall but again became a cyclonic storm at 2100 UTC of 19 September, 2006. Present study establishes that DWR is very useful for prediction of this short term cyclonic storm, its direction of movement and heavy rainfall associated. The maximum radial winds of the magnitude 32 m/s (64 knots/115 km/h) were also recorded by DWR at an altitude of 2.5 km in the eye wall region of the system. The high wind speed and the well defined structure of the cyclone observed by DWR confirmed that the system was a Severe Cyclonic Storm of T number 3.5. Records are available with surface observatories in the region for strong winds of the order of 110 km/h. This study also revealed that an early warning for strong winds and heavy rainfall could have been issued for development of such a short duration tropical cyclone using DWR data well in advance.

Precursors of backflow events and their relationship with the near-wall self-sustaining process

This study examines the precursors and consequences of rare backflow events at the wall using direct numerical simulation of turbulent pipe flow with a high spatiotemporal resolution. The results obtained from conditionally averaged fields reveal that the precursor of a backflow event is the asymmetric collision between a high- and a low-speed streak (LSS) associated with the sinuous mode of the streaks. As the collision occurs, a lifted shear layer with high local azimuthal enstrophy is formed at the trailing end of the LSS. Subsequently, a spanwise or an oblique vortex spontaneously arises. The dominant nonlinear mechanism by which this vortex is engendered is enstrophy intensification due to direct stretching of the lifted vorticity lines in the azimuthal direction. As time progresses, this vortex tilts and orientates towards the streamwise direction and, as its enstrophy increases, it induces the breakdown of the LSS located below it. Subsequently, this vortical structure advects as a quasi-streamwise vortex, as it tilts and stretches with time. As a result, it is shown that reverse flow events at the wall are the signature of the nonlinear mechanism of the self-sustaining process occurring at the near-wall region. Additionally, each backflow event has been tracked in space and time, showing that approximately 50 % of these events are followed by at least one additional vortex generation that gives rise to new backflow events. It is also found that up to a maximum of seven regenerations occur after a backflow event has appeared for the first time.

Studies of critical heat fluxes in small diameter channels

The paper presents the results of experimental studies of critical heat flows in vertical small diameter channels, when the coolant moves from bottom to top, which were carried out in the Obninsk branch of MEPhI in the 1970s of the last century but have not become widespread due to the lack of demand for their practical use. Nowadays, the interest in such works is manifested, first of all, in the development of compact plants and devices, particularly in nuclear power engineering. As a coolant, water, Freon-12 and 96% ethyl alcohol were used. High velocities of underheated liquid at high heat fluxes on the channel wall lead to the so-called “fast crisis” of heat transfer. In this case, the magnitude of the heat flux depends mainly on the parameters of the coolant flow in the wall zone rather than the flow core. The “slow crisis” is mainly observed at high vapor concentrations, relatively low mass flow rates and in an annular-dispersed flow. The value of the critical heat flow in this case depends mainly on the flow parameters in the core, which are probably close to the average coolant flow parameters. The conditions in the near-wall region are also largely determined by the flow in the core. High heat transfer coefficients in a flow moving at high speed usually result in a much smaller and slower rise in the wall temperature. Sometimes a DNB heat flux can occur bypassing the boiling process. In the core of a VVER-type reactor operating in its nominal mode, surface boiling is present in a number of fuel rods. Probably, surface boiling will also be present in transportable and small-size nuclear power plants. Therefore, an important task is to conduct relevant research in this area.

Radius of influence of a vortex

Using the pressure profile in and around a vortex tube a simple relation for the radius of influence of the vortex has been derived. The results have been applied to assess the region of maximum devastation in a tornado. The analysis reveals that the occurrence of 'eye wall' region in a tropical cyclone is a hydrodynamical phenomenon.

Secondary Flow in Smooth and Rough Turbulent Circular Pipes: Turbulence Kinetic Energy Budgets

Direct Numerical Simulations have been performed for turbulent flow in circular pipes with smooth and corrugated walls. The numerical method, based on second-order finite discretization together with the immersed boundary technique, was validated and applied to various types of flows. The analysis is focused on the turbulence kinetic energy and its budget. Large differences have been found in the near-wall region at low Reynolds number. The change in the near-wall turbulent structures is responsible for increase of drag and turbulence kinetic energy. To investigatselinae the effects of wall corrugations, the velocity fields have been decomposed so as to isolate coherent and incoherent motions. For corrugated walls, we find that coherent motions are strongest for walls covered with square bars aligned with the flow direction. In particular, the coherent contribution is substantial when the bars are spaced apart by a distance larger than their height. Detailed analysis of the turbulence kinetic energy budget shows for this set-up a very different behavior than for the other types of corrugations.

Flow-Particle Coupling in a Channel Flow Laden with Elongated Particles: The Role of Aspect Ratio

A turbulent channel flow laden with elongated, fiber-like particles is investigated experimentally by optical techniques. The flow-particle inter-coupling is analyzed in the case of particles with an aspect ratio of 40 and 80, at two volume fractions, 10−5 and 10−4. An image processing technique is presented, which is employed to simultaneously obtain carrier flow velocimetry data and distribution and orientation data of dispersed particles. Turbulence enhancement is reported in the near-wall region, with a higher level of increase associated with higher aspect ratio particles. Comparison to fiber data suggests that this mechanism of turbulence modulation stems from a particles orientational behavior. The preferential particle distribution is reported to be dependent on the aspect ratio in the region close to the wall. The probability density function of the fibers’ orientation angle appears to be independent of the particle aspect ratio once it is conditioned to the fibers’ characteristic size.