scholarly journals EFFECT OF POST-WELD HEAT TREATMENT ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF ARC WELDED MEDIUM CARBON STEEL

2016 ◽  
Vol 35 (2) ◽  
pp. 337 ◽  
Author(s):  
MR Dodo ◽  
T Ause ◽  
MA Adamu ◽  
YM Ibrahim
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Carbon Steel ◽  
Medium Carbon Steel ◽  
Post Weld Heat Treatment ◽  
Medium Carbon ◽  
Microstructure And Mechanical Properties ◽  
Weld Heat

Microstructure and Mechanical Properties of a Nb-Microalloyed Medium Carbon Steel Treated by Quenching-Partitioning Process

2012 ◽  
Vol 531-532 ◽  
pp. 596-599
Author(s):  
Kai Zhang ◽  
Shang Wen Lu ◽  
Yao Hui Ou ◽  
Xiao Dong Wang ◽  
Ning Zhong
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Electron Microscope ◽  
Carbon Steel ◽  
Retained Austenite ◽  
High Strength ◽  
Medium Carbon Steel ◽  
Orientation Relationships ◽  
Medium Carbon ◽  
Microstructure And Mechanical Properties

The recently developed “quenching and partitioning” heat treatment and “quenching-partitioning-tempering” heat treatment are novel processing technologies, which are designed for achieving advanced high strength steels (AHSS) with combination of high strength and adequate ductility. In present study, a medium carbon steel containing Nb was subjected to the Q-P-T process, and both the microstructure and mechanical properties was studied. The experimental results show that the Nb-microalloyed steel demonstrates high tensile strength and relatively high elongation. The microstructure of the steel was investigated in terms of scanning electron microscope and transmission electron microscope, and the results indicate that the Q-P-T steel consist of fine martensite laths with dispersive carbide precipitates and the film-like interlath retained austenite. The orientation relationships between martensite and retained austenite is as well-known Kurdjurmov-Sachs relationship and Nishiyama-Wasserman relationship.

scholarly journals Effect of Deformation on Microstructure and Mechanical Properties of Medium Carbon Steel During Heat Treatment Process

2021 ◽  
Vol 34 (1) ◽  
Author(s):  
Yan Peng ◽  
Caiyi Liu ◽  
Ningning Wang
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Carbon Steel ◽  
Heating Temperature ◽  
Lath Martensite ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Experimental Steel ◽  
Microstructure And Mechanical Properties ◽  
Strength And Plasticity

AbstractThe current research of the Q-P and Q-P-T process has been focused on controlling the heating temperature and holding time, or adding alloy elements into the steel to induce precipitation strengthening and improve the strength and plasticity of the steel. In this article, based on a quenching-partitioning-tempering (Q-P-T) process combined with a hot deformation technology, a deforming-quenching-partitioning-tempering (D-Q-P-T) process was applied to medium carbon steel. The effect of the heat treatment parameters on the microstructure and mechanical properties of experimental steel under deformation was studied. Through use of a scanning electron microscope (SEM), transmission electron microscopy (TEM) and tensile tests, the optimal heat treatment conditions for realizing high strength and plasticity that meet the safety requirements were obtained. The mechanism for the D-Q-P-T process to improve the strength and plasticity of experimental steel was discussed. A multiphase composite structure of lath martensite and retained austenite was obtained. Compared with the Q-P-T process, use of the D-Q-P-T process can increase the strength of steel by 57.77 MPa and the elongation by 5%. This study proposes a method to improve the strength and plasticity of steel.

Process Integrated Heat Treatment of a Microalloyed Medium Carbon Steel: Microstructure and Mechanical Properties

2016 ◽  
Vol 25 (4) ◽  
pp. 1453-1462 ◽  
Author(s):  
Sebastian Herbst ◽  
Mareike Schledorn ◽  
Hans Jürgen Maier ◽  
Andrij Milenin ◽  
Florian Nürnberger
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Carbon Steel ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Steel Microstructure ◽  
Microstructure And Mechanical Properties

INFLUENCE THE QUENCHING AND TEMPERING ON THE MICROSTRUCTURE, MECHANICAL PROPERTIES AND SURFACE ROUGHNESS, OF MEDIUM CARBON STEEL

2018 ◽  
Vol 18 (1) ◽  
pp. 125-135
Author(s):  
Sattar H A Alfatlawi
Keyword(s):  
Mechanical Properties ◽  
Heat Treatment ◽  
Surface Roughness ◽  
Carbon Steel ◽  
Cold Water ◽  
Medium Carbon Steel ◽  
Medium Carbon ◽  
Heating And Cooling ◽  
Treatment Processes ◽  
Quenching And Tempering

One of ways to improve properties of materials without changing the product shape toobtain the desired engineering applications is heating and cooling under effect of controlledsequence of heat treatment. The main aim of this study was to investigate the effect ofheating and cooling on the surface roughness, microstructure and some selected propertiessuch as the hardness and impact strength of Medium Carbon Steel which treated at differenttypes of heat treatment processes. Heat treatment achieved in this work was respectively,heating, quenching and tempering. The specimens were heated to 850°C and left for 45minutes inside the furnace as a holding time at that temperature, then quenching process wasperformed in four types of quenching media (still air, cold water (2°C), oil and polymersolution), respectively. Thereafter, the samples were tempered at 200°C, 400°C, and 600°Cwith one hour as a soaking time for each temperature, then were all cooled by still air. Whenthe heat treatment process was completed, the surface roughness, hardness, impact strengthand microstructure tests were performed. The results showed a change and clearimprovement of surface roughness, mechanical properties and microstructure afterquenching was achieved, as well as the change that took place due to the increasingtoughness and ductility by reducing of brittleness of samples.

Sign in / Sign up

Export Citation Format

Share Document